One For All Panasonic URC4914 TV-udskiftningsfjernbetjening brugermanual

1. Introduktion

This manual provides instructions for the One For All URC4914 Panasonic TV Replacement Remote Control. This remote is designed to function as a direct replacement for your original Panasonic TV remote, offering compatibility with various Panasonic TV types including LCD, LED, and Plasma models. It supports common Panasonic functions and includes a learning feature for customization.

2. Opsætning

2.1. Batteriinstallation

URC4914 fjernbetjeningen kræver to AA-batterier (medfølger ikke). Følg disse trin for at installere dem:

1. Find batterirummets dæksel på bagsiden af ​​fjernbetjeningen.
2. Skub dækslet nedad, eller tryk på låsen (hvis den er monteret) for at åbne rummet.
3. Isæt to AA-batterier, og sørg for, at de positive (+) og negative (-) poler er justeret korrekt med markeringerne inde i batterirummet.
4. Sæt batteridækslet på igen ved at skubbe det på plads, indtil det klikker sikkert.

Billede 1: Bag view of the URC4914 remote control, illustrating the location of the battery compartment. The cover is typically located on the lower half of the remote's back side.

2.2. Førstegangsbrug

No setup is required for basic functionality. Once batteries are installed, the remote is ready to operate all compatible Panasonic televisions. Point the remote towards your TV and press the MAGT button to test.

3. Betjeningsvejledning

The URC4914 remote control features a standard layout for Panasonic TVs. Below is an overview af nøgleknapper og deres funktioner.

Billede 2: Front view of the URC4914 remote control, displaying the full button layout for operation.

3.1. Knapfunktioner

• MAGT: Tænder eller slukker for tv'et.
• INPUT/TV/AV: Selects the input source (e.g., HDMI 1, AV, TV tuner).
• VIERA LINK: Activates Panasonic's Viera Link function for connected devices.
• GUIDE: Viser den elektroniske programguide (EPG).
• APPS/NETFLIX/HOME: Provides quick access to smart TV applications, specifically Netflix, and the TV's home menu.
• Navigationstastatur (op, ned, venstre, højre, OK): Bruges til menunavigation og valg.
• EXIT/MENU/BACK: Exits menus, opens the main menu, or goes back to the previous screen.
• VOL +/-: Justerer lydstyrken.
• PR +/- (Channel +/-): Skifter tv-kanaler.
• STUM: Slår lyden fra eller til for TV-lyden.
• Playback Controls (Play, Pause, Stop, Rewind, Fast Forward, Record): Controls media playback on compatible devices or TV functions.
• Nummertastatur (0-9): Direkte kanalvalg og dataindtastning.
• INFO: Viser oplysninger om det aktuelle program eller input.

3.2. Læringsfunktion

The URC4914 remote includes a learning function, allowing you to copy functions directly from your original remote control. This is useful for any specific functions not pre-programmed or for customizing button assignments.

1. Place the URC4914 remote and your original remote on a flat surface, facing each other, approximately 1-2 inches apart.
2. Tryk og hold på OPSÆTNING button (if present, or a combination like SHIFT + SETUP) on the URC4914 until the LED blinks twice and then stays lit.
3. Press the button on the URC4914 remote that you wish to program. The LED will blink rapidly.
4. Press and hold the corresponding button on your original remote. The URC4914's LED should blink twice to confirm successful learning.
5. Repeat for other buttons you wish to learn.
6. For at afslutte indlæringstilstanden skal du trykke på OPSÆTNING knappen igen.

Note: Specific steps for entering learning mode may vary. Refer to the full One For All manual for detailed instructions if the above does not apply.

4. Vedligeholdelse

4.1. Udskiftning af batteri

When the remote's performance degrades or it stops responding, it is likely time to replace the batteries. Always replace both AA batteries at the same time with new ones. Do not mix old and new batteries, or different types of batteries.

4.2. Rensning

Brug en blød, tør klud til at rengøre fjernbetjeningen. Brug ikke slibende rengøringsmidler, opløsningsmidler eller våde klude, da disse kan beskadige fjernbetjeningens overflade eller interne komponenter.

5. Fejlfinding

• Fjernbetjeningen svarer ikke:
  • Kontroller, om batterierne er isat korrekt med den korrekte polaritet.
  • Udskift batterierne med friske AA-batterier.
  • Sørg for, at der ikke er nogen forhindringer mellem fjernbetjeningen og tv'ets infrarøde sensor.
  • Sørg for, at du er inden for den effektive rækkevidde af tv'ets IR-modtager.
• Specifikke knapper virker ikke:
  • If you used the learning feature, try re-learning the function for that specific button.
  • Ensure your TV model supports the function you are trying to use.
• Fjernbetjeningen fungerer periodisk:
  • Dette indikerer ofte lav batteristrøm. Udskift batterierne.
  • Ensure the remote's infrared emitter is clean and free from dust.

6. Specifikationer

7. Garanti og support

For warranty information or technical support regarding your One For All URC4914 remote control, please refer to the official One For All webwebstedet eller kontakt deres kundeservice direkte. Detaljer findes typisk på produktemballagen eller på producentens webwebsted.