Indledning
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Cisco IP Phone 8845. The Cisco IP Phone 8800 Series with Multi-Platform Phone firmware is designed to enhance workplace productivity with its user-friendly features, ergonomic design, wideband audio, and secure communications.
The Cisco IP Phone 8845 features a 5-inch VGA backlit color display and supports 720p HD two-way video. It includes a Gigabit Ethernet switch and supports Class 2 Power over Ethernet (PoE).
Figure 1: A collection of Cisco 8800 series IP phones, showcasing the range of models available in this series.
Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- Cisco IP Phone 8845 Unit
- Håndsæt
- Håndsætledning
- Ethernet kabel
- Power Cube (if not using PoE)
- Power Cord (if not using PoE)
Note: The power cube and power cord are included for non-PoE deployments.
Opsætning
1. Fysisk forbindelse
Before connecting the phone, ensure you have access to a network drop and, if not using Power over Ethernet (PoE), a power outlet.
- Tilslut håndsættet: Sæt den ene ende af håndsættets ledning i håndsættet og den anden ende i håndsætporten på telefonens base.
- Opret forbindelse til netværk: Connect one end of the Ethernet cable to the network port (labeled SW or Netværk) on the back of the phone and the other end to your network switch or wall jack.
- Tilslutning til pc (valgfrit): If you wish to connect a PC through the phone, connect an Ethernet cable from your PC to the PC port (labeled PC) on the back of the phone.
- Tilslut strøm (hvis du ikke bruger PoE): If your network does not provide PoE, connect the power cube to the power port on the phone and then plug the power cord into an electrical outlet.
Figure 2: Cisco IP Phone 8845 with connected handset and network cables. This image shows the phone from a slightly elevated angle, highlighting the display, keypad, and the connected handset.
2. Første opstart og konfiguration
Once connected, the phone will power on automatically and begin the boot-up process. This may take a few minutes.
- The phone will attempt to obtain network configuration (IP address, subnet mask, gateway, DNS) via DHCP.
- It will then attempt to register with your call control system (e.g., Cisco Unified Communications Manager or Cisco Webex Calling).
- Follow any on-screen prompts for initial setup, such as language selection or network settings if DHCP is not available.
Note: This device is optimized for Cisco Webex Calling. A Cisco Webex subscription must be purchased separately for full functionality.
Betjeningsvejledning
Foretage og modtage opkald
- Sådan foretager du et opkald: Lift the handset, press a line button, or press the Speaker button. Dial the number and press the Ring softkey or wait for automatic dialing.
- For at besvare et opkald: Lift the handset, press the flashing line button, or press the Svar funktionstast.
- Sådan afslutter du et opkald: Læg håndsættet på, eller tryk på Afslut opkald softkey or Speaker button.
Using Fixed Function Keys
The phone features dedicated buttons for common functions:
- Beskeder: Få adgang til din telefonsvarer.
- Vejviser: Access corporate and personal directories.
- Hold/Genoptag: Place an active call on hold or resume a held call.
- Overførsel: Transfer an active call to another party.
- Konference: Start et konferenceopkald.
- Indstillinger: Access phone settings and preferences.
Video Calling (720p HD)
The Cisco IP Phone 8845 supports 720p HD two-way video communication.
- Start af et videoopkald: When making a call, if the recipient's device supports video, the video stream will automatically activate. Ensure the camera is not obstructed.
- Managing Video: Use the on-screen softkeys to control video features such as muting your video feed or switching camera views (hvis relevant).
Figure 3: Icons illustrating video and multi-user collaboration capabilities of the phone.
Opretholdelse
Rengøring af telefonen
- Afbryd altid strømmen til telefonen inden rengøring.
- Brug en blød, fnugfri klud lidt damprengøres med vand eller et mildt, ikke-slibende rengøringsmiddel.
- Sprøjt ikke rengøringsmidler direkte på telefonen.
- Undgå at bruge skrappe kemikalier, opløsningsmidler eller slibende materialer.
Firmware opdateringer
Firmware updates are typically managed by your IT administrator. These updates ensure optimal performance, security, and access to new features. Do not attempt to manually update firmware unless instructed by your administrator.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Telefonen tænder ikke. | Ingen strøm fra PoE eller strømadapter. | Check Ethernet cable connection to a PoE-enabled port or ensure power adapter is securely plugged in. |
| Kan ikke foretage eller modtage opkald. | Problem med netværksforbindelse eller registreringsfejl. | Verify Ethernet cable connection. Check network status on the phone display. Contact your IT administrator if the issue persists. |
| No video during a video call. | Camera obstructed, network bandwidth, or recipient's device does not support video. | Ensure camera is clear. Check network connection. Confirm recipient's device capabilities. |
| Dårlig lydkvalitet. | Handset cord loose, network congestion, or faulty equipment. | Reseat handset cord. Check network performance. Test with another phone if possible. |
For issues not listed here, please contact your IT support or refer to the Cisco support webwebsted.
Specifikationer
- Model: Cisco IP Phone 8845 (CP-8845-3PW-NA-K9=)
- Vise: 5-inch VGA (800 x 480 pixels) backlit color display
- Video: 720p HD Two-Way Video
- Ethernet-switch: Integrated Gigabit Ethernet (10/100/1000) switch
- Magt: Class 2 Power over Ethernet (PoE) or optional AC power adapter
- Lyd: Wideband audio support
- Nøgler: Fixed function keys for common features (service, messaging, directory, hold/resume, transfer, conference)
- Programmerbare nøgler: Support for line keys and call features (e.g., speed dialing)
- Dimensioner: Cirka 12.4 x 11.7 x 5.5 tommer (L x B x H)
- Vægt: Cirka 5.05 pund
- Materiale: Polycarbonat
- Farve: Sort
Figure 4: Feature comparison table for Cisco 8800 series phones, highlighting the 8845 model's specifications including color display, 10 lines, 4 soft keys, no USB, Power over Ethernet, no WiFi, Bluetooth, no DECT, HD 720p Video, Voice Prompts, Smart Phone Integration, and Wall Mountable.
Garanti og support
Garantioplysninger
Cisco products typically come with a limited hardware warranty. For specific warranty terms and conditions applicable to your Cisco IP Phone 8845, please refer to the documentation provided with your purchase or visit the official Cisco webwebsted.
Teknisk support
For technical assistance, troubleshooting, or service requests, please contact your organization's IT department or your authorized Cisco partner. You can also find extensive support resources, documentation, and community forums on the official Cisco Support webwebsted:
