Indledning
Thank you for choosing the Ferm 20 Volt 1.5 Ah Cordless Drill/Driver. This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Designed for versatility, this aluminum drill/driver features a 6 mm drilling function, making it ideal for various home and workshop tasks. Please read this manual thoroughly before first use and keep it for future reference.
Sikkerhedsinstruktioner
Overhold altid grundlæggende sikkerhedsforanstaltninger ved brug af elektrisk værktøj for at reducere risikoen for brand, elektrisk stød og personskade.
- Sikkerhed på arbejdsområdet: Hold dit arbejdsområde rent og godt oplyst. Rodede eller mørke områder indbyder til ulykker. Brug ikke elværktøj i eksplosive atmosfærer, f.eks. i nærheden af brandfarlige væsker, gasser eller støv.
- Elektrisk sikkerhed: Undgå kropskontakt med jordforbundne overflader. Udsæt ikke elværktøj for regn eller våde forhold.
- Personlig sikkerhed: Brug altid øjenbeskyttelse. Brug høreværn ved længerevarende arbejde. Klæd dig korrekt på; undgå løstsiddende tøj eller smykker.
- Brug og pleje af værktøj: Tving ikke elværktøjet. Brug det korrekte elværktøj til din opgave. Frakobl batteriet fra elværktøjet, før du foretager justeringer, skifter tilbehør eller opbevarer elværktøjet.
- Batteripakkesikkerhed: Recharge only with the charger specified by the manufacturer. Do not disassemble, open, or shred battery packs. Do not expose battery packs to heat or fire.
Produkt overview
Familiarize yourself with the components of your Ferm Cordless Drill/Driver.
Figur 1: Forside view of the Ferm 20 Volt 1.5 Ah Cordless Drill/Driver. This image shows the main body of the drill, including the chuck, torque setting ring, speed selector, trigger, and the attached 20V 1.5Ah battery pack.
Figure 2: The Ferm Cordless Drill/Driver alongside its battery charger. This image illustrates the complete package, including the drill with its battery and the separate charging unit with its power cable.
Figure 3: The durable black carrying case for the Ferm Cordless Drill/Driver. This image shows the compact and robust case designed for protecting and transporting the tool and its accessories.
Opsætning
Opladning af batteriet
- Tilslut opladeren til en almindelig stikkontakt.
- Sæt batteripakken i opladeren. Sørg for, at den klikker på plads.
- The charging indicator light on the charger will illuminate (refer to charger manual for specific light indications).
- Når det er fuldt opladet, skal du fjerne batteriet fra opladeren.
Note: Fully charge the battery before first use. The battery is a 20 Volt Lithium-ion type.
Montering/fjernelse af borehoveder
- Ensure the drill is switched off and the battery pack is removed for safety.
- Drej spændepatronen mod uret for at åbne kæberne.
- Insert the drill bit or screwdriver bit into the chuck, ensuring it is centered.
- Drej spændepatronen med uret for at stramme kæberne sikkert omkring boret.
- To remove, rotate the chuck counter-clockwise until the jaws open, then pull out the bit.
Drift
Tænd/sluk
- To turn on, press the trigger switch. The speed increases with pressure.
- For at slukke, slip afbryderen.
Fremad/bagud rotation
The forward/reverse selector switch is located above the trigger. Push it to the left for forward rotation (for drilling and tightening screws) and to the right for reverse rotation (for loosening screws).
Momentindstilling
The torque setting ring is located behind the chuck. Rotate it to select the desired torque level. Lower settings are for driving small screws or working with soft materials, while higher settings are for larger screws or harder materials. The drill also has a dedicated drilling mode for maximum power without clutch engagement.
Drilling and Screwdriving Tips
- Hold altid værktøjet fast med begge hænder.
- Tryk konstant og jævnt. Brug ikke for meget kraft på boremaskinen.
- For drilling, start with a pilot hole if necessary, especially in hard materials.
- For screwdriving, ensure the bit is fully seated in the screw head to prevent stripping.
Opretholdelse
Rensning
- Rengør regelmæssigt værktøjets ventilationsåbninger for at forhindre overophedning.
- Brug en blød, damp klud til at tørre ydersiden af. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
- Keep the chuck jaws free of dust and debris.
Opbevaring
- Store the drill/driver and battery pack in a cool, dry place, away from direct sunlight and moisture.
- Hvis batteriet opbevares i længere perioder, skal du sørge for, at det er delvist opladet (ca. 50%) for at forlænge dets levetid.
- Store the tool in its original carrying case for protection.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Boremaskinen starter ikke. | Batteriet er ikke opladet eller ikke isat korrekt. | Charge battery. Ensure battery is fully seated. |
| Strømtab under drift. | Battery low or overloaded. | Genoplad batteriet. Reducer trykket på værktøjet. |
| Bit glider i borepatronen. | Borepatronen er ikke strammet tilstrækkeligt, eller boreskaftet er snavset. | Tighten chuck firmly. Clean bit shank. |
| Overophedning. | Blokerede ventilationsåbninger eller kontinuerlig kraftig brug. | Rengør ventilationsåbningerne. Lad værktøjet køle af. |
Specifikationer
- Mærke: Ferm
- Model: 20 Volt 1.5 Ah Cordless Drill/Driver
- Voltage: 20 volt
- Batteritype: Litium-ion (1.5 Ah)
- Chuck Size (Max): 6 millimeter
- Materiale: Aluminium
- Strømkilde: Batteridrevet
Garanti og support
Ferm products are manufactured to high quality standards. This product comes with a standard manufacturer's warranty. For detailed warranty information, service, or technical support, please refer to the warranty card included with your product or visit the official Ferm webwebsted. Gem venligst din købsbevis i tilfælde af garantikrav.
For further assistance, you may contact Ferm customer service through their official channels. Always provide your product model number and purchase details when seeking support.
