Indledning
The SONICAKE Sonic Wood is a versatile multi-effects pedal designed specifically for acoustic guitar players. It integrates four essential effects: a Preamp, Chorus, Delay, and Reverb, offering a comprehensive solution for stage performances and studio recordings. This manual provides detailed instructions for setup, operation, and maintenance of your Sonic Wood pedal.
Nøglefunktioner
- One-Stop Gig Solution for Acoustic Instruments Players with Main Effects needed
- Analog præamp med 2-bånds EQ genskaber en klassisk akustisk guitar Amplifier, provide a warm, natural sound
- High Quality Chorus, Delay, Reverb Effects for Different Playing Scenarios
- Tap Tempo and Tail On/Off function for Delicate Control
- XLR Output for directly connecting to PA, Mixer or Audio Interface.
Opsætning
Følg disse trin for at konfigurere din SONICAKE Sonic Wood-pedal:
- Strømtilslutning: Connect the included 9V DC power adapter (center negative, 500mA) to the "DC 9V" input jack on the pedal. Ensure the power source is stable.
Image: The Sonic Wood pedal connected to its power adapter, showing the DC 9V input.
- Instrumentindgang: Connect your acoustic guitar to the "IN" 1/4-inch input jack on the right side of the pedal.
Image: An acoustic guitar cable plugged into the input jack of the Sonic Wood pedal.
- Output Connection (1/4-inch): Connect the "OUT" 1/4-inch jack to your acoustic amplifier or another pedal in your signal chain.
- XLR Output Connection: For direct connection to a PA system, mixer, or audio interface, use the "XLR OUT" balanced output on the left side of the pedal.
Billede: Et nærbillede view of the XLR output jack on the Sonic Wood pedal.
Betjeningsvejledning
The Sonic Wood pedal features four main effects, each with dedicated controls and footswitches.
1. Forudamp Afsnit
The analog preamp recreates the warm, natural sound of a classic acoustic guitar amplifier. It includes a 2-band EQ for tone shaping.
- BIND: Justerer den samlede udgangslydstyrke for pre-højttalerenamp.
- BAS: Styrer lavfrekvensresponsen.
- TREB: Styrer højfrekvensresponsen.
Press the rightmost footswitch to engage or bypass the Preamp effekt.
Image: Close-up of the Preamp section with Volume, Bass, and Treble knobs.
2. Chorus Section
The high-quality Chorus effect adds richness and depth to your acoustic tone.
- NIVEAU: Adjusts the mix level of the chorus effect.
- DYBDE: Controls the intensity of the chorus modulation.
- SATS: Adjusts the speed of the chorus modulation.
Press the second footswitch from the right to engage or bypass the Chorus effect.
Tryk på Tempo: Hold down the Chorus footswitch for 2 seconds to enter Tap Tempo mode. Tap the footswitch multiple times to set the desired modulation rate. Hold again to exit.
Video: Demonstration of the SONICAKE Sonic Wood pedal's various effects, including the Chorus with Tap Tempo function.
3. Delay Section
The analog-voiced Delay effect provides organic repeats for various playing scenarios.
- BLANDING: Adjusts the mix level of the delayed signal.
- GENTAGE: Controls the number of repeats (feedback).
- TID: Adjusts the delay time between repeats.
Press the second footswitch from the left to engage or bypass the Delay effect.
Tryk på Tempo: Hold down the Delay footswitch for 2 seconds to enter Tap Tempo mode. Tap the footswitch multiple times to set the desired delay time. Hold again to exit.
4. Reverb Section
The Reverb effect adds spaciousness and ambiance to your sound. It is designed to be easy to control yet powerful.
- BLANDE: Adjusts the mix level of the reverb effect.
Press the leftmost footswitch to engage or bypass the Reverb effect.
Tail On/Off: Hold down the Reverb footswitch for 2 seconds to toggle the Tail function. When Tail is ON, the reverb trails naturally even after bypassing the effect, creating a smooth transition.
Video: Detailed demonstration of the Sonic Wood pedal's features, including the Reverb effect and its Tail function.
Opretholdelse
To ensure the longevity and optimal performance of your SONICAKE Sonic Wood pedal, follow these maintenance guidelines:
- Hold pedalen ren ved at tørre den af med en blød, tør klud. Undgå at bruge slibende rengøringsmidler eller opløsningsmidler.
- Opbevar pedalen et tørt sted, væk fra ekstreme temperaturer og fugtighed.
- Avoid dropping the pedal or subjecting it to strong impacts, as this can damage internal components.
- Always use the specified 9V DC (center negative) power adapter to prevent damage.
Fejlfinding
If you encounter issues with your Sonic Wood pedal, try the following solutions:
- Ingen lyd:
- Ensure all cables (instrument, output, power) are securely connected.
- Verify the power adapter is correctly plugged in and providing power.
- Check if your guitar's volume is turned up and your amplifier is on and set correctly.
- Omgå pedalen for at kontrollere, om problemet skyldes pedalen eller andet udstyr.
- Uønsket støj/brummen:
- Ensure you are using the correct power adapter (9V DC, center negative).
- Try a different power outlet or a power conditioner.
- Check for faulty cables and replace if necessary.
- Ensure proper grounding of your equipment.
- Effekter der ikke er engagerende:
- Press the footswitch firmly to ensure it engages.
- Check if the pedal is receiving power (LEDs should light up).
Specifikationer
| Attribut | Værdi |
|---|---|
| Varens vægt | 1.06 pund (0.48 kilo) |
| Produktdimensioner | 10.31 cm L x 2.52 cm B x 1.77 cm H (2.8 x 15.85 x 2.24 cm) |
| Varemodelnummer | QCE-50(Sonic Wood) |
| Farve | Sort |
| Strømkilde | Elektrisk med ledning |
| Voltage | 9 volt |
| Signalformat | Analog |
| Hardware-interface | 1/4-tommer lyd |
Garanti & Support
For garantioplysninger og teknisk support henvises til den officielle SONICAKE webwebstedet eller kontakt deres kundeservice direkte. Beskyttelsesplaner kan også være tilgængelige for udvidet dækning.
- 3-årig beskyttelsesplan: Kan købes.
- 4-årig beskyttelsesplan: Kan købes.
- Komplet beskyttelse: Månedlig plan, der dækker berettigede tidligere og fremtidige køb.
