SmallRig Adjustable Sling Handgrip Gimbal Handle for DJI RS Series (Model 3028-SR)

1. Introduktion

This manual provides detailed instructions for the proper installation, operation, and maintenance of your SmallRig Adjustable Sling Handgrip (Model 3028-SR). This accessory is designed to enhance the usability of your DJI RS series gimbal by reducing arm fatigue and improving stability for low-angle shots. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

Figure 1.1: SmallRig Adjustable Sling Handgrip attached to a DJI gimbal.

2. Produktet er slutview

2.1 Nøglefunktioner

• Ergonomisk design: Features a curved grip with increased length and finger stops for a comfortable and secure hold, constructed from a combination of silicone and aluminum alloy.
• Hurtig frigivelse: Attaches securely to your gimbal via a NATO clamp with an anti-removal stud for safe and rapid operation.
• 180-Degree Adjustment: Allows for flexible shooting angles and reduced arm strain through its built-in rosette joint, which can also be detached for standalone use.
• Abundant Mounting Points: Includes multiple 1/4"-20 and 3/8"-16 threads (ARRI standard) and two cold shoe mounts for attaching accessories like magic arms, monitors, wireless microphones, or video transmitters.
• Høj lasteevne: Supports up to 8 kg (17.6 lbs), suitable for various camera setups.
• Integrated QD Socket: Provides an option to mount a QD neck or shoulder strap for additional support.

2.2 Kompatibilitet

The SmallRig Sling Handgrip (Model 3028-SR) is specifically designed for the following DJI RS series gimbals:

• DJI RS 4 Mini
• DJI RS4
• DJI RS 4 Pro
• DJI RS 3 Mini
• DJI RS3
• DJI RS 3 Pro
• DJI RS2
• DJI RSC 2

Figure 2.1: Compatible DJI RS series gimbals.

Figur 2.2: Overview af nøgleproduktfunktioner.

3. Pakkens indhold

The package for the SmallRig Adjustable Sling Handgrip (Model 3028-SR) includes:

• Gimbal Sling Handle × 1

Figure 3.1: Contents of the package.

4. Opsætning og installation

Follow these steps to properly attach the SmallRig Sling Handgrip to your DJI RS series gimbal:

1. Identificér monteringspunkt: The sling handgrip is designed to mount exclusively on the venstre side of your DJI RS series gimbal. Attempting to mount it on the right side is not supported.
2. Attach NATO Clamp: Locate the NATO rail on the left side of your gimbal. Align the NATO clamp on the sling handgrip with this rail.
3. Fastgør Clamp: Slide the handgrip onto the NATO rail until it is fully seated. Tighten the locking lever on the NATO clamp to secure the handgrip firmly in place. Ensure the anti-removal stud is engaged for added security.
4. Bekræft stabilitet: Gently test the attachment to ensure there is no wobble or looseness before attaching your camera setup.

Figure 4.1: Proper left-side mounting of the sling handgrip.

Figure 4.2: Reinforced structure and installation location.

5. Betjeningsvejledning

5.1 Ergonomic Grip and Low-Angle Shots

The ergonomic design of the sling handgrip provides a comfortable and secure hold, significantly reducing arm fatigue during extended shooting sessions. It is particularly effective for achieving stable low-angle shots, allowing you to position your gimbal closer to the ground or subject with greater control.

Figure 5.1: Ergonomic grip detail.

Figure 5.2: Comfortable grip for enhanced control.

Figure 5.3: Reduced arm fatigue and load capacity.

5.2 Vinkeljustering

The integrated rosette joint allows for 180-degree angle adjustment. To adjust the angle:

1. Loosen the ratchet knob on the rosette joint.
2. Adjust the handgrip to your desired angle.
3. Tighten the ratchet knob to secure the angle.

Figure 5.4: 180-degree quick angle adjustment.

5.3 Montering af tilbehør

The sling handgrip features multiple mounting points for various accessories:

• 1/4"-20 and 3/8"-16 ARRI Threads: Use these threads to attach magic arms (e.g., SmallRig 3874) or monitor mounts (e.g., SmallRig 2903B).
• Cold Shoe-beslag: Two cold shoe mounts (one on top, one on the side) allow for the attachment of wireless microphones, video transmitters, or other cold shoe compatible accessories.
• QD-stikkontakt: An integrated QD socket provides a quick-release point for attaching a QD neck strap or shoulder strap (not included) for additional support and carrying options.

Figure 5.5: Additional features and mounting points.

Figure 5.6: Expandable mounting options.

Figur 5.7: Flere anvendelsesscenarier.

6. Vedligeholdelse

To ensure the longevity and proper functioning of your SmallRig Sling Handgrip, follow these maintenance guidelines:

• Rensning: Wipe the handgrip with a soft, dry cloth after each use to remove dust and debris. For stubborn dirt, use a slightly damp klud og mild sæbe, og tør derefter grundigt. Undgå barske kemikalier eller slibende materialer.
• Opbevaring: Store the handgrip in a clean, dry environment away from extreme temperatures and direct sunlight.
• Inspektion: Periodically check all screws and connections to ensure they are tight. Do not overtighten.

7. Fejlfinding

• Handgrip feels loose after attachment: Sørg for NATO-clausenamp's locking lever is fully tightened. Verify that the handgrip is correctly seated on the gimbal's NATO rail and that the anti-removal stud is engaged.
• Cannot attach handgrip: Confirm you are attempting to mount the handgrip on the venstre side of the gimbal. The design is specific to the left side only.
• Vanskeligheder med at justere vinklen: Loosen the ratchet knob on the rosette joint sufficiently before attempting to adjust the angle. If the joint is stiff, ensure it is clean and free of debris.

8. Specifikationer

9. Garanti og support

SmallRig-produkter er fremstillet efter høje kvalitetsstandarder. For garantioplysninger, teknisk support eller serviceforespørgsler henvises til den officielle SmallRig-side. webwebstedet eller kontakt deres kundeservice direkte. Gem din købskvittering som købsbevis i tilfælde af garantikrav.