Yaheetech Aluminium 3 Folding Massage Table with Rolling Stool User Manual

Indledning

This manual provides comprehensive instructions for the safe and effective setup, operation, and maintenance of your Yaheetech Aluminium 3 Folding Massage Table and Rolling Stool. Please read all instructions carefully before use to ensure proper functionality and longevity of your product.

Image: The Yaheetech Aluminium 3 Folding Massage Table and Rolling Stool set.

Sikkerhedsoplysninger

WARNING: This product can expose you to chemical Lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/furniture.

• Sørg for, at alle komponenter er forsvarligt samlet før brug.
• Do not exceed the maximum weight capacity of the massage table or stool.
• Hold hænder og fingre væk fra bevægelige dele under justering.
• Brug på en flad, stabil overflade for at forhindre væltning.
• Undersøg produktet regelmæssigt for tegn på slid eller skader. Stop brugen, hvis der konstateres skader.

Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

• 1 x Aluminium 3 Folding Massage Table
• 1 x Adjustable Rolling Stool
• 1 x Adjustable Headrest
• 2 x armlæn
• 1 x Storage Bag (integrated with table when folded)

Opsætningsinstruktioner

Massage Table Setup

1. Fold bordet ud: Place the folded massage table on its side on a flat surface. Release the chrome clasps and gently open the table.
2. Stræk benene ud: Allow the legs to unfold completely. Ensure all leg support cables are taut and the legs are locked into position.
3. Juster højden: To adjust the table height, locate the small round knobs on each leg. Press the knobs and slide the inner leg section up or down to the desired height. Ensure all four legs are set to the same height and the knobs are securely engaged in the adjustment holes. The table offers 8 different height positions.
4. Fastgør nakkestøtten: Insert the headrest support bars into the designated slots at one end of the table. Adjust the angle of the headrest as needed.
5. Fastgør armlæn: Skub armlænene ind i rillerne på siderne af bordet.

Image: Visual guide for unfolding the massage table and attaching the headrest and armrests.

Rolling Stool Assembly

The rolling stool typically requires minimal assembly. Follow these general steps:

1. Fastgør hjul: Insert the five casters (wheels) into the holes at the end of each leg of the stool base. Push firmly until they click into place.
2. Connect Base to Seat: Place the stool seat upside down. Insert the pneumatic cylinder (if separate) into the center hole of the stool base. Then, place the seat onto the top of the pneumatic cylinder.

Betjeningsvejledning

Massage Table Operation

• Højdejustering: As described in the setup section, press the round knobs on the legs to adjust the table height. Ensure all legs are at the same level for stability.
• Nakkestøttejustering: The headrest can be tilted to various angles for client comfort. Loosen the adjustment levers, set the desired angle, and tighten the levers securely.
• Armrest Usage: The armrests provide additional comfort and support. Ensure they are fully inserted into their slots before use.

Image: Diagram showing the adjustable dimensions of the massage table, including height range.

Rolling Stool Operation

• Højdejustering: To adjust the stool's height, pull the lever located under the seat while seated or standing. Release the lever at the desired height.
• Drejefunktion: The stool seat offers 360-degree rotation, allowing for easy movement and access without repositioning the base.
• Mobilitet: The five smooth-rolling casters allow for quiet and effortless movement across various floor surfaces.

Image: Diagram illustrating the 360-degree rotation and adjustable height features of the rolling stool.

Opretholdelse

• Rengøring af bordet: Wipe the massage table surfaces with a dry cloth. For deeper cleaning, a damp cloth with a few drops of gentle cleanser can be used, then wipe dry immediately.
• Cleaning the Stool: The PU leather surface of the stool can be cleaned with a damp cloth and a mild cleanser. The chrome iron base can be wiped with a dry cloth.
• Regelmæssig inspektion: Periodically check all screws, bolts, and adjustment mechanisms for tightness and proper function. Tighten any loose fasteners.
• Opbevaring: When not in use, fold the massage table and store it in a dry, cool place to prolong its lifespan.

Fejlfinding

• Bordustabilitet: Ensure all four legs are extended to the same height and the adjustment knobs are fully engaged. Check that the leg support cables are taut.
• Stool Not Adjusting Height: Verify that the height adjustment lever is fully engaged and the pneumatic cylinder is correctly seated.
• Vanskeligheder ved foldning/udfoldning: Ensure no obstructions are present and the clasps are fully released. Do not force the mechanism.
• Knirkende lyde: Check all joints and fasteners for tightness. Applying a small amount of silicone lubricant to pivot points may help.

Specifikationer

Garanti og support

For garantioplysninger eller teknisk support henvises til producentens officielle webwebstedet eller kontakt sælgeren direkte via din købsplatform. Gem dit købsbevis til eventuelle garantikrav.