THRONMAX M20 USB-mikrofonsæt brugermanual

Indledning

This manual provides comprehensive instructions for the setup, operation, and maintenance of your THRONMAX M20 USB Microphone Kit. Please read thoroughly before use to ensure optimal performance and longevity of your device.

Pakkens indhold

Your THRONMAX M20 USB Microphone Kit includes the following components:

• THRONMAX M20 Condenser Microphone
• USB Cable (Type-C to USB 2.0)
• Justerbar bomarm
• Skrivebord Clamp for Boom Arm
• Shock Mount
• Popfilter
• Skum forrude

Opsætningsinstruktioner

1. Vedhæft skrivebordskl.amp: Fastgør skrivebordet clamp to the edge of your desk. Ensure it is tightened firmly to provide a stable base for the boom arm.
2. Install Boom Arm: Insert the base of the adjustable boom arm into the desk clamp. Adjust the arm's position and tension as needed for your desired setup.
3. Assemble Shock Mount: Attach the shock mount to the end of the boom arm. The shock mount helps isolate the microphone from vibrations and handling noise.
4. Indsæt mikrofon: Gently squeeze the clips of the shock mount and insert the THRONMAX M20 microphone. Ensure it is securely held.
5. Apply Foam Windscreen: Slide the foam windscreen over the microphone capsule. This reduces plosive sounds and protects the microphone.
6. Attach Pop Filter: Secure the pop filter to the boom arm, positioning it a few inches in front of the microphone. The pop filter further minimizes plosives and sibilance.
7. Tilslut USB-kabel: Connect the USB Type-C end of the provided cable to the microphone and the USB 2.0 end to an available USB port on your computer (PC or Mac OS). The microphone is plug-and-play and does not require additional driver software or an external sound card.

Betjeningsvejledning

Grundlæggende betjening:

• Plug and Play: Once connected via USB, your computer should automatically recognize the THRONMAX M20 as an audio input device.
• Select as Input Device: In your operating system's sound settings or your recording/streaming software, select "THRONMAX M20" as the primary microphone input.
• Adjust Input Level: Monitor your audio levels in your software and adjust the microphone's input gain as necessary to prevent clipping or distortion.

Nøglefunktioner:

• Professional Sound Chipset: The integrated 96kHz/24bit professional sound chipset ensures high-resolution audio capture.
• 16mm Transsound Condenser Capsule: Provides a strong bass response and captures crystal-clear audio.
• RGB-baggrundsbelysning: The M20 features 24 modes of RGB LED lighting, which can be customized or turned off according to user preference. Refer to the device's physical controls or accompanying software (if any) for RGB adjustment.
• Double Shielding USB Cable: The included USB cable is double-shielded to reduce interference and ensure a clean audio signal.

Opretholdelse

• Rensning: Use a soft, dry cloth to wipe down the microphone body and stand. Avoid using liquid cleaners directly on the microphone.
• Skum forrude: The foam windscreen can be gently hand-washed with mild soap and water, then air-dried completely before re-use.
• Opbevaring: When not in use, store the microphone and its components in a clean, dry place to prevent dust accumulation and potential damage.
• Kabelpleje: Avoid sharp bends or kinks in the USB cable to prevent internal wire damage.

Fejlfinding

• Ingen lydoutput:
  • Sørg for, at USB-kablet er korrekt tilsluttet til både mikrofonen og computeren.
  • Verify that "THRONMAX M20" is selected as the input device in your computer's sound settings and your recording software.
  • Check the input gain level in your software; it might be set too low.
• Forvrænget lyd:
  • Reduce the input gain level in your software or on the microphone itself (if applicable) to prevent clipping.
  • Sørg for, at mikrofonen ikke er for tæt på lydkilden.
• Background Noise/Hum:
  • Ensure the double-shielded USB cable is used.
  • Try connecting the microphone to a different USB port or a different computer to rule out port-specific issues.
  • Minimize other electronic devices near the microphone that might cause interference.
• Mikrofon ikke genkendt:
  • Genstart din computer.
  • Prøv en anden USB-port.
  • Sørg for, at dit operativsystem er opdateret.

Specifikationer

Garanti og support

For warranty information and technical support, please refer to the official THRONMAX webwebstedet eller kontakt deres kundeservice direkte. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

Online ressourcer og ofte stillede spørgsmål kan også være tilgængelige på THRONMAX Store Page.