1. Produktet er slutview
The Innokin Kroma-Z is a versatile and compact pod mod system designed for both Mouth-to-Lung (MTL) and Restricted Direct-to-Lung (RDL) vaping. It features a 3000mAh internal battery, adjustable wattage up to 40W, and utilizes Innokin's popular Z-Coils. This manual provides detailed instructions for safe and effective use of your Kroma-Z device.
Hvad er der i æsken
Please check the contents of your Innokin Kroma-Z kit:
- 1 x Kroma-Z Mod
- 1 x Kroma-Z Pod (2ml)
- 1 x 0.8Ω Z-Coil (Pre-installed)
- 1 x Spare 0.3Ω Z-Coil
- 1 x Extra Drip Tip
- 1 x USB Type-C opladningskabel
- 1 x Hurtigstartguide (brugermanual)
Billede: The complete contents of the Innokin Kroma-Z kit, including the Kroma-Z Mod, Kroma-Z Pod (2ml), 0.8 Ohm Z Coil (pre-installed), Spare 0.3 Ohm Z Coil, Extra Drip Tip, USB-C Charging Cable, and Quick Start Guide.
2. Opsætningsvejledning
2.1. Opladning af enheden
Before first use, ensure your Kroma-Z is fully charged. Connect the provided USB Type-C cable to the charging port at the bottom of the device and plug the other end into a suitable USB power source (e.g., wall adapter, computer USB port). The battery indicator on the LCD screen will show charging progress.
Billede: The Kroma-Z features a 3000mAh internal battery for extended use. It supports fast charging via its USB Type-C port, allowing for convenient and quick recharging.
2.2. Spoleinstallation
The Kroma-Z uses Innokin Z-Coils. A 0.8Ω Z-Coil is pre-installed, and a spare 0.3Ω Z-Coil is included.
- Remove the pod from the Kroma-Z mod.
- Twist the base of the pod to unlock and remove the old coil (if replacing).
- Align the new Z-Coil with the grooves in the pod base and push it firmly into place. Ensure it is fully seated.
- Twist the pod base back to lock the coil.
Billede: To install a coil, align the coil with the base of the pod and push it firmly into place. Ensure the coil is fully seated to prevent leaks and ensure proper connection.
2.3. Filling the Pod with E-liquid
The Kroma-Z pod has a 2ml e-liquid capacity.
- With the pod attached to the mod, locate the silicone fill tab on the side of the pod.
- Gently lift the silicone tab to expose the fill port.
- Insert the nozzle of your e-liquid bottle into the fill port and slowly fill the pod. Avoid overfilling.
- Securely close the silicone tab to prevent leaks.
- After filling a new coil, wait at least 5 minutes before vaping to allow the e-liquid to fully saturate the coil. This prevents dry hits and extends coil life.
Billede: The Kroma-Z pod features an easy top-fill system. Locate the fill port on the side of the pod, open the silicone plug, and fill with your preferred e-liquid. Close the plug securely after filling.
2.4. Attaching the Pod to the Mod
The Kroma-Z pod attaches magnetically to the mod.
- Ensure the coil is properly installed and the pod is filled.
- Align the pod with the top of the Kroma-Z mod.
- The magnets will pull the pod into place, securing it firmly.
Billede: The pod attaches securely to the Kroma-Z mod via a strong magnetic connection. Simply align the pod with the mod and it will snap into place.
3. Betjeningsvejledning
3.1. Tænd/sluk
- For at dreje enheden ON: Press the fire button 3 times rapidly.
- For at dreje enheden SLUKKET: Press the fire button 3 times rapidly. The screen will display "System Off".
3.2. Justering af Wattage
The Kroma-Z has an adjustable wattage område fra 6.0W til 40W.
- Use the '+' and '-' adjustment buttons located below the screen to increase or decrease the wattage.
- The device features Smart Coil ID, which automatically suggests a suitable wattage range for the installed coil. You can adjust within this range to find your preferred setting.
Billede: The Kroma-Z features a clear LCD screen that displays essential information such as current wattage, battery level, coil resistance, and puff count. The device intelligently identifies the coil's resistance and suggests a suitable wattage niveau.
3.3. Airflow Control
The Kroma-Z features an external airflow control slider, allowing you to customize your draw from a tight MTL to a more open RDL.
- Locate the airflow slider on the side of the device.
- Slide it left or right to increase or decrease the airflow.
- Experiment with different settings to find your preferred draw and vapor production.
Billede: Adjust the airflow to your preference using the external slider. This allows for a versatile vaping experience, from a tight Mouth-to-Lung (MTL) draw to a more open Restricted Direct-to-Lung (RDL) draw. Different drip tips are included for optimal MTL and RDL experiences.
3.4. Vaping
Once the device is charged, the coil is installed and saturated, and the pod is filled and attached:
- Press and hold the fire button while inhaling from the mouthpiece.
- Release the fire button when you finish inhaling.
4. Vedligeholdelse
4.1. Udskiftning af spole
Coils are consumable parts and need to be replaced regularly, typically every 1-2 weeks, depending on usage and e-liquid type. You will notice a decrease in flavor, vapor production, or a burnt taste when the coil needs changing. Refer to section 2.2 for coil installation steps.
4.2. Rensning
- Pod: Periodically remove the pod and rinse it with warm water (without the coil installed). Ensure it is completely dry before re-installing a coil and filling with e-liquid.
- Mod: Wipe the mod body with a soft, dry cloth. Clean the magnetic connection points and the coil contact pins on the mod with a cotton swab to ensure good conductivity.
4.3. Batteripleje
- Undgå at aflade batteriet helt ofte.
- Udsæt ikke enheden for ekstreme temperaturer (varme eller kolde).
- Brug kun det medfølgende USB Type-C-kabel eller et tilsvarende certificeret kabel til opladning.
5. Fejlfinding
| Spørgsmål | Mulig årsag | Løsning |
|---|---|---|
| No Vapor / Device Not Firing | Device off, low battery, coil not installed correctly, faulty coil. | Turn on device (3 clicks), charge battery, re-install coil, replace coil. |
| "Check Atomizer" / "No Coil" Message | Coil not detected, poor connection, faulty coil. | Ensure coil is fully seated, clean contact pins on mod and coil, try a new coil. |
| Brændt smag | Coil not saturated, coil needs replacement, wattage for højt. | Wait 5 minutes after filling new coil, replace coil, lower wattage. |
| Leaking from Pod | Coil not installed correctly, fill tab not closed, worn seals, overfilling. | Ensure coil is fully seated, close fill tab securely, replace pod if seals are damaged, do not overfill. |
| Batteri oplader ikke | Faulty cable, dirty charging port, faulty device. | Try a different USB-C cable, clean charging port, contact support if issue persists. |
6. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | INNOKIN |
| Model | Kroma-Z |
| WattagRækkevidde | 6.0W - 40W |
| Batterikapacitet | 3000mAh (intern) |
| Tank kapacitet | 2ml (UK/EU Compliant) |
| Spolekompatibilitet | Innokin Z-Coil Series |
| Opladningsport | USB Type-C |
| Kropsmateriale | Magnesium legering |
| Dimensioner (pakke) | 14.4 x 8.3 x 5 cm |
| Vægt (pakke) | 230 g |
7. Garanti og support
For warranty information, technical support, or any product-related inquiries, please contact INNOKIN directly through their official website or the retailer where you purchased the device. Keep your proof of purchase for warranty claims.
Juridisk ansvarsfraskrivelse
This item has no nicotine, no e-liquid. The following warning applies when the product is used with nicotine-containing e-liquid: This product contains nicotine which is a highly addictive substance. Keep this product out of the reach of children.
