STAR WARS R2-D2 3D-bevægelse Lamp Instruktionsmanual

1. Introduktion

Tak for købetasing the STAR WARS R2-D2 3D Motion Lamp. This 18-inch mood light is designed to provide a relaxing visual experience with its unique liquid motion. Please read this manual thoroughly before use to ensure safe and proper operation of your product.

2. Vigtige sikkerhedsoplysninger

Dette produkt er ikke egnet til børn under 10 år.
This is not a toy and is not intended for use as a night light.
Placer lamp på en stabil, plan overflade for at forhindre væltning.
Sørg for tilstrækkelig ventilation omkring lampDæk ikke låget til.amp or place it in an enclosed space.
Lamp's base may become warm during operation. Avoid prolonged direct contact with the base.
Betjen ikke lamp hvis ledningen eller stikket er beskadiget.
Forsøg ikke at åbne eller ændre l'en.amp's sealed liquid chamber.
Tag stikket ud af lamp fra stikkontakten, før du rengør eller udskifter pæren.
Use only the specified bulb type (25-watt R39 E17) for replacement.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

1x R2-D2 3D Motion Lamp Enhed
1x Power Cord with In-line On/Off Switch
1x 25-watt R39 E17 Bulb (pre-installed)
1x Replacement 25-watt R39 E17 Bulb
1x Instruction Booklet

4. Opsætningsvejledning

Pakker ud: Fjern forsigtigt alle komponenter fra emballagen.
Placering: Choose a flat, stable, and heat-resistant surface for the lamp. Ensure it is away from direct sunlight, extreme temperatures, and out of reach of children and pets.
Pærekontrol: The 25-watt R39 E17 bulb is typically pre-installed. Gently check that it is securely screwed into the socket at the base of the lamp. If replacement is needed, refer to the "Maintenance" section.
Tilslut strøm: Insert the power cord plug into the designated port at the back of the lamp's base.
Tilslut: Sæt strømadapteren i en almindelig stikkontakt.

A person plugging the R2-D2 motion lamp ind i en stikkontakt. — Figure 1: Connecting the power cord to the R2-D2 Motion Lamp.

5. Betjeningsvejledning

Tænd: Locate the in-line On/Off switch on the power cord. Flip the switch to the "On" position.
Indledende opvarmning: Lamp requires a warm-up period for the motion effect to begin. This can take anywhere from 1 to 3 hours, depending on room temperature. During this time, the liquid will heat up, and the blue globules will start to flow.
Nyde: Once the motion begins, enjoy the relaxing visual display of the R2-D2 Motion Lamp.
Sluk: For at slukke for lamp, simply flip the in-line On/Off switch on the power cord to the "Off" position.

The R2-D2 motion lamp illuminated with blue liquid motion in a dimly lit room. — Figure 2: R2-D2 Motion Lamp in operation, showcasing the liquid motion.

6. Vedligeholdelse

Rensning: Sørg for at lamp is unplugged and completely cool before cleaning. Wipe the exterior surfaces with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Udskiftning af pære:
1. Tag stikket ud af lamp fra stikkontakten.
2. Carefully remove the glass globe by gently twisting and lifting it from the base.
3. Unscrew the old 25-watt R39 E17 bulb from the socket.
4. Screw in the new 25-watt R39 E17 bulb. Do not overtighten.
5. Carefully place the glass globe back onto the base, ensuring it is seated properly.
6. Tilslut lamp tilbage i stikkontakten.

7. Fejlfinding

Problem	Mulig årsag	Løsning
Lamp tændes ikke.	No power, faulty bulb, or faulty switch.	Check if the power cord is securely plugged into the outlet and the lamp. Ensure the in-line switch is in the "On" position. Replace the bulb if it is burnt out.
No motion or slow motion.	Insufficient warm-up time, incorrect room temperature, or faulty bulb.	Allow 1-3 hours for the lamp to fully warm up. Ensure the room temperature is between 68-75°F (20-24°C). Verify the correct 25-watt R39 E17 bulb is installed and functioning.
Liquid is cloudy.	Overheating or improper storage.	Sluk for lamp and allow it to cool completely. Ensure the lamp is not exposed to direct sunlight or extreme heat. If cloudiness persists, contact customer support.
Base is excessively hot.	Normal operation, but could indicate an issue if extreme.	It is normal for the base to be warm. If the base feels dangerously hot to the touch, immediately unplug the lamp and discontinue use. Contact customer support.

8. Specifikationer

Mærke: STAR WARS
Modelnummer: 886388135820
Dimensioner: 11.6 x 4.7 x 18.2 tommer (29.5 x 11.9 x 46.2 cm)
Varens vægt: 1.36 pund (0.62 kg)
Materiale: Glas
Strømkilde: Plug-in elektrisk
Voltage: 230 Volts (Note: Product description states 230V, but US products typically use 120V. Verify local voltage compatibility.)
Wattage: 25 watt
Pære base: E17
Lyskildetype: Glødelampe
Kontrolmetode: Touch (via in-line switch)
Indendørs/udendørs brug: Indendørs
Fabrikant: Robe Factory LLC
UPC: 886388135820

9. Garanti og support

This appliance typically comes with a 90-day warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical support or customer service, please contact the manufacturer at support@ukonic.com.

	DIY Star Wars Beer Tap Handles: Darth Vader & R2-D2 Custom Craft A step-by-step guide to creating custom Star Wars-themed beer tap handles featuring Darth Vader and R2-D2, using MDF, CNC carving, and detailed painting techniques.
	Star Wars Unlimited: Reglas Completas Reglamento completo del juego de cartas coleccionables Star Wars: Unlimited, detaljerede oplysninger om spil, mekanik, og opbygning af spil til en dybtgående oplevelse.
	Star Wars vaffelmaskine WM5-SRW-DVST: Brugsanvisning, sikkerhed og opskriftsvejledning Omfattende guide til Star Wars vaffeljernet WM5-SRW-DVST, der dækker betjeningsvejledning, vigtige sikkerhedsoplysninger, pleje og vedligeholdelse samt en opskrift på belgiske vafler. Indeholder definitioner af sikkerhedsadvarselssymboler og tips til optimal vaffelbagning.
	Star Wars Sith Holocron Serie 2 Brugervejledning Instruktioner og information til Star Wars Sith Holocron Serie 2, inklusive aktivering, krystalindsættelse og forbindelse med andre holocroner.
	Star Wars Yoda animeret figur monterings- og betjeningsvejledning Officiel samle- og betjeningsvejledning til Star Wars Yoda animerede figur (model 4124175). Indeholder deleliste, trinvis samlevejledning, betjeningstilstande, advarsler og plejeinstruktioner.
	Star Wars 6 fods animerede stormtrooper: Brugs-, pleje- og monteringsvejledning Omfattende guide til Star Wars 6 Ft Animated Stormtrooper (model 24SV24407), inklusive deleliste, samlevejledning, betjeningstilstande, advarsler og plejetips. Indeholder Halloween- og juletilbehør.

STAR WARS 886388135820