Oris 01 733 7720 4354-07 4 21 18

Oris Divers Sixty-Five automatisk ur brugsanvisning

Model: 01 733 7720 4354-07 4 21 18

Indledning

This manual provides essential information for the proper use, care, and maintenance of your Oris Divers Sixty-Five Automatic Watch. Please read this manual thoroughly before using your watch to ensure optimal performance and longevity.

Oris Divers Sixty-Five Automatic Watch with black dial, gold-tone hands and markers, and a black rubber strap.

Figure 1: Oris Divers Sixty-Five Automatic Watch (Model: 01 733 7720 4354-07 4 21 18)

Opsætning

Udpakning og indledende inspektion

Tag forsigtigt uret ud af emballagen. Undersøg uret for synlige skader. Sørg for, at alle beskyttelsesfilm er fjernet fra glasset og bagkassen.

Indstilling af tid og dato

  1. Skru kronen af: The crown is located on the right side of the watch case. Gently unscrew it counter-clockwise until it pops out to position 1.
  2. Indstilling af dato: Træk kronen ud til position 2. Drej kronen med eller mod uret for at justere datoen. Undgå at indstille datoen mellem kl. 9 og 3, da dette kan beskadige urværket.
  3. Indstilling af tid: Pull the crown out to position 3. Turn the crown to move the hour and minute hands. To ensure accurate time setting, synchronize with a reliable time source.
  4. Vikle uret: After setting, push the crown back to position 1. Wind the watch by turning the crown clockwise approximately 20-30 times. This provides the initial power reserve for the automatic movement.
  5. Skru kronen fast: Push the crown firmly back into the case and screw it down clockwise until it is tight. This ensures water resistance.

Betjening af uret

Automatisk bevægelse

Your Oris Divers Sixty-Five watch is equipped with an automatic mechanical movement. It is powered by the natural motion of your wrist. When worn regularly, the watch will remain wound. If the watch is not worn for an extended period, it may stop. In this case, manually wind it as described in the "Setup" section.

Ensrettet roterende bezel

The watch features a unidirectional rotating bezel, designed for timing dives or other events. To use, align the triangle marker on the bezel with the minute hand at the start of your activity. The bezel will only rotate counter-clockwise, preventing accidental increases in elapsed time.

Vandmodstand

This watch is water resistant to 10 BAR (100 meters / 330 feet). It is suitable for swimming and snorkeling. Vigtig: Ensure the crown is fully screwed down before any contact with water. Do not operate the crown or pushers (if present) while the watch is submerged or wet.

Opretholdelse

Rensning

For at rengøre dit ur skal du bruge en blød,amp cloth. For more thorough cleaning, especially after exposure to saltwater, rinse the watch with fresh water and dry it with a soft cloth. Do not use harsh chemicals or abrasive materials.

Opbevaring

When not wearing the watch, store it in a cool, dry place, away from direct sunlight and strong magnetic fields. If storing for an extended period, consider a watch winder to keep the automatic movement running.

Serviceintervaller

For optimal performance and longevity, it is recommended to have your Oris watch serviced by an authorized service center every 3-5 years. This includes checking the movement, seals, and water resistance.

Fejlfinding

ProblemMulig årsagLøsning
Watch stops or loses timeUtilstrækkelig gangreserveManually wind the watch (20-30 turns of the crown) or wear it for several hours.
Datoen ændres ikkeIncorrect time setting (AM/PM)Advance the time by 12 hours. Ensure the date is not set during the restricted period (9 PM - 3 AM).
Kondensation under krystalLoss of water resistance or extreme temperature changeImmediately take the watch to an authorized service center. Avoid further contact with water.

If the problem persists after attempting these solutions, please contact an authorized Oris service center.

Specifikationer

  • Modelnummer: 01 733 7720 4354-07 4 21 18
  • Bevægelse: Oris Automatic Mechanical
  • Æske diameter: 42 mm
  • Vandtæthed: 10 BAR (100 meter / 330 fod)
  • Spændetype: Udrulningslås
  • Skivefarve: Sort
  • Remmateriale: Gummi
  • Første tilgængelige: 31. oktober 2019

Garanti og support

Oris watches are manufactured to the highest standards and undergo rigorous quality control. For information regarding your watch's warranty, please refer to the warranty card included with your purchase or visit the official Oris website. For service and support, please contact an authorized Oris service center.

Fabrikant: Oris

Relaterede dokumenter - 01 733 7720 4354-07 4 21 18

Preview Volkswagen Golf VIII (Variant) Anhængertræk Monteringsvejledning
Detaljeret monteringsvejledning til Oris anhængertræk (varenummer: 200191, typenummer: 054041) til Volkswagen Golf VIII (Variant). Indeholder sikkerhedsadvarsler, momentspecifikationer og trinvise monteringsdiagrammer.
Preview Oris anhængertræk monteringsvejledning til Mazda CX-3 (2015-) - Del 053743
Omfattende monteringsvejledning og tekniske specifikationer for Oris anhængertrækssystem (varenummer 053743) designet til Mazda CX-3 Station Wagon (2015-). Indeholder monteringstrin, sikkerhedsadvarsler, ECE R55-homologeringsoplysninger og reservedelsliste.
Preview ORIS anhængertræk monteringsvejledning til IVECO Daily Van (Varenummer: 041002)
Omfattende monteringsvejledning og sikkerhedsretningslinjer for ORIS anhængertrækssystem designet til IVECO Daily Van (fra 2014 og frem). Indeholder varenumre, tekniske specifikationer, monteringstrin og vigtige sikkerhedsadvarsler.
Preview Oris anhængertræk monteringsvejledning til Volvo XC60 & XC70
Omfattende monteringsvejledning og sikkerhedsretningslinjer for Oris anhængertræk, kompatibel med Volvo XC60 (2008-2017) og Volvo XC70 (2007-2016) modeller. Indeholder tekniske specifikationer, ECE R55 homologering, reservedelsliste og detaljerede monteringstrin.
Preview ORIS anhængertræk monteringsvejledning til Kia Sorento og Hyundai Santa Fe
Omfattende monteringsvejledning og sikkerhedsretningslinjer for ORIS anhængertræk (varenummer 200174) på ​​Kia Sorento SUV (MQ4) og Hyundai Santa Fe SUV (TM) modeller. Indeholder tekniske specifikationer, reservedelsliste og trinvise monteringsprocedurer.
Preview ORIS anhængertræk monteringsvejledning til Kia og Hyundai modeller
Omfattende monteringsvejledning og tekniske specifikationer for ORIS anhængertræk, kompatible med Kia ProCeed, Kia Ceed (stationcar), Hyundai i30 (HB) og Hyundai i30 (stationcar). Indeholder varenumre, momentindstillinger, sikkerhedsretningslinjer og ECE R55-homologeringsoplysninger.