Indledning
This manual provides essential information for the safe and effective use of your BRIO World Battery-Operated Steaming Train. Designed for imaginative play, this motorized train features cool-to-touch steam effects, lights, and forward/reverse motion. Please read all instructions carefully before use.
Hvad er inkluderet
Your BRIO World Battery-Operated Steaming Train package includes the following components:
- 1x Battery-Operated Steaming Engine
- 1x Water Refill Wagon
- 1x Water Refill Load
Image: The three main components included in the BRIO World Battery-Operated Steaming Train set.
Specifikationer
| Feature | Detalje |
|---|---|
| Produktdimensioner | 20.08 x 3.94 x 14.57 tommer |
| Varens vægt | 4.3 ounce |
| Modelnummer | 33884 |
| Anbefalet alder | 3 år og opefter |
| Batterier påkrævet | 2 AAA batterier (medfølger ikke) |
| Særlige funktioner | Cool-to-touch steam, forward/reverse motion, lights |
Sikkerhedsoplysninger
ADVARSEL: Not for children under the age of 3. Adult supervision is recommended during play, especially when handling water for the steam feature.
Opsætning
1. Batteriinstallation
The train engine requires 2 AAA batteries (not included). Locate the battery compartment on the underside of the engine. Use a small screwdriver to open the compartment, insert the batteries according to the polarity markings, and secure the cover.
2. Filling the Water Reservoir for Steam
The steaming train uses a cool-to-touch water vapor effect. To activate this feature, you need to fill the water reservoir:
- Remove the water refill load from the water refill wagon.
- Submerge the tip of the water refill load into clean water (tap water is suitable).
- Squeeze the top of the water refill load to draw water into it.
- Carefully insert the tip of the filled water refill load into the designated hole on top of the train engine (marked H2O).
- Gently squeeze the water refill load to transfer the water into the engine's reservoir.
- Place the water refill load back into its wagon.
Image: Visual guide for filling the train's water reservoir.
Video: Official demonstration of the BRIO World 33884 Steaming Train, including the water filling process and steam effect.
Betjeningsvejledning
1. Start af toget
Place the train engine and its attached water refill wagon onto a compatible wooden train track. Press and hold the red power button on top of the engine for approximately 3 seconds to activate it. The front lights will illuminate, and the train will begin to move forward.
Image: Activating the train by pressing the red button.
2. Forward and Reverse Motion
The train features two red buttons on its top. One button controls forward motion, and the other controls reverse motion. Press the desired button to change the train's direction.
3. Activating Steam Effect
Once the water reservoir is filled and the train is running, the cool-to-touch steam effect will automatically activate. You may need to wait a minute or two for the steam to become consistently visible after initial water filling.
Image: The train emitting cool-to-touch steam during operation.
Video: Official video showcasing the BRIO Steam Train in action, demonstrating its movement and steam feature.
Opretholdelse
1. Rensning
Wipe the train and accessories with a damp cloth. Do not submerge the electronic components in water. Ensure the water reservoir is empty and dry before storing for extended periods.
2. Vandpåfyldning
The steam effect will diminish as the water reservoir empties. Refill the reservoir as needed following the instructions in the "Setup" section.
3. Udskiftning af batteri
If the train's lights dim or its movement slows, it may be time to replace the AAA batteries. Follow the battery installation steps in the "Setup" section.
Fejlfinding
| Problem | Mulig årsag/løsning |
|---|---|
| Toget kører ikke, eller lysene tændes ikke. | Check battery installation and ensure batteries are fresh. Hold the power button for 3 seconds to activate. |
| Ingen damp eller meget lidt damp. | Ensure the water reservoir is filled. Allow 1-2 minutes for the train to warm up after filling. |
| Tog afsporer ofte. | Ensure tracks are properly connected and laid flat. Check for any obstructions on the track. |
Garanti og support
For detailed warranty information or further support, please refer to the official BRIO website or contact BRIO customer service. A digital version of the user manual (PDF) is also available for download from the product's Amazon page or the BRIO webwebsted.
Overvej købasing a protection plan for extended coverage. Options include 2-Year and 3-Year Protection Plans, or a Complete Protect plan for multiple eligible purchases.
Officiel brugermanual (PDF): Download PDF
