Indledning
This manual provides detailed instructions for the setup, operation, and maintenance of your Plumeet Digital Alarm Clock. Designed for simplicity and ease of use, this clock offers essential features such as adjustable brightness, alarm volume, and a convenient USB charging port. Please read this manual thoroughly to ensure proper use and to maximize your product experience.
Produkt overview
The Plumeet Digital Alarm Clock features a large LED display with adjustable brightness, making it suitable for various lighting conditions. It includes an alarm with adjustable volume and a snooze function, along with a USB port for charging external devices.
Figur 1: Forside view of the Plumeet Digital Alarm Clock, showing the large blue LED display.
Figure 2: Comparison highlighting key improvements in the upgraded version, including 0-100 adjustable brightness and 30-90 DB alarm volume.
Figure 3: Visual summary of the clock's portable and practical features, such as volume control, dimmer, dual USB ports, 5.5-inch diagonal display, snooze, and 12/24 hour format.
Opsætning
Unboxing and Initial Power-Up
Når du åbner pakken, skal du sørge for, at alle komponenter er til stede:
- Plumeet LED Alarm Clock
- Strømadapter
- Opladningskabel (USB)
- Brugermanual
- Tak kort
Figure 4: Contents included in the product package: LED alarm clock, power adapter, charging cable, and user manual.
Power Connection and Battery Backup
The clock is primarily powered by the included DC adapter. For backup during power outages, you can install AAA batteries.
- Connect the USB cable to the DC adapter and plug it into a power outlet.
- Insert two (2) AAA batteries (not included) into the battery compartment on the back of the clock. These batteries will memorize the time and alarm settings in case of power failure. During battery backup, the time display will not be active, and the alarm will not sound.
Video 1: A demonstration on how to set up the clock, including battery installation and power connection.
Betjeningsvejledning
Indstilling af tid
- Tryk og hold på "TIDSINDSTILLING" button on the back of the clock until the hours digit begins to flash.
- Brug "+" og "-" knapper for at justere timen.
- Tryk på "TIDSINDSTILLING" button again. The minutes digit will flash.
- Brug "+" og "-" knapper for at justere minutterne.
- Tryk på "TIDSINDSTILLING" knappen én gang til for at bekræfte og afslutte tidsindstillingstilstanden.
Indstilling af alarm
- Tryk og hold på "ALARMINDSTIL" button on the back of the clock until the alarm hours digit begins to flash.
- Brug "+" og "-" knapper for at justere alarmtiden.
- Tryk på "ALARMINDSTIL" button again. The alarm minutes digit will flash.
- Brug "+" og "-" knapper til at justere alarmens minutter.
- Tryk på "ALARMINDSTIL" knappen én gang til for at bekræfte og afslutte alarmindstillingstilstand.
Slå alarm TIL/FRA
Tryk på "AL.ON/OFF" button to toggle the alarm on or off. When the alarm is active, a bell icon will appear on the display.
Snooze funktion
Når alarmen lyder, skal du trykke på den store "SNOOZE" button on top of the clock to activate the snooze function. The alarm will pause for 10 minutes and then sound again. The alarm will last for approximately 3 minutes if snooze is not activated.
Figure 5: Illustration of the snooze button and its 10-minute interval function.
Justering af skærmens lysstyrke (dæmper)
The clock features a 0-100 level adjustable LED brightness. Use the "LOW DIMMER" rotary knob on the side of the clock to adjust the display brightness from completely off (0) to brightest (100).
Figure 6: Visual guide to adjusting the LED display brightness from off to brightest using the dimmer control.
Justering af alarmvolumen
The alarm volume can be adjusted from 30 DB to 90 DB. Use the "LOW VOLUME" rotary knob on the side of the clock to set your preferred alarm volume.
Figure 7: Illustration showing the adjustable alarm volume settings from 30 DB to 90 DB.
12/24 timers format
Tryk på "12/24HR" button on the back of the clock to switch between 12-hour and 24-hour time formats.
USB-opladningsport
The clock features an additional USB port that can be used to charge your cellphone, tablet, MP3 players, or other smart devices. This port is for charging only and does not transfer data.
Opretholdelse
- To clean the clock, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Undgå at udsætte uret for ekstreme temperaturer, direkte sollys eller høj luftfugtighed.
- Ensure the clock is placed on a stable surface to prevent accidental falls.
Fejlfinding
| Problem | Mulig årsag/løsning |
|---|---|
| Clock display is off / No power. |
|
| Alarmen lyder ikke. |
|
| Skærmen er for lys/mørket. | Adjust the brightness using the "LOW DIMMER" rotary knob on the side of the clock. |
| Time/Alarm setting is difficult. | Refer to the "Setting the Time" and "Setting the Alarm" sections in this manual. The clock is designed for simple operation with clearly marked buttons. |
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Plumeet |
| Modelnummer | EM-8033-WB |
| Display Type | Digital LED |
| Skærmstørrelse | 5.5 tommer (diagonal) |
| Lysstyrke | 0-100 level adjustable dimmer |
| Alarmvolumen | 30-90 DB adjustable |
| Snooze-varighed | 10 minutter |
| Tidsformat | 12-timers / 24-timers valgbar |
| Strømkilde | DC Adapter (included) |
| Batteri backup | 2 x AAA batterier (medfølger ikke) |
| USB-port | 1 x USB charging port (for external devices) |
| Dimensioner | 5.7 cm B x 2.8 cm H |
| Materiale | Plast |
| Varens vægt | 8 ounces (0.5 pund) |
Figure 8: Product dimensions: 5.7 inches wide by 2.8 inches high.
Garanti og support
Plumeet is committed to providing high-quality products and satisfactory customer services. In case of any issues or complaints about this clock, please do not hesitate to contact us. For further assistance, please refer to the contact information provided with your purchase or visit the official Plumeet store online.
You can visit the Plumeet Store at: Plumeet Store
