1. Introduktion
Tak for købetasing the allen + roth Remy Flushmount Ceiling Fixture. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The Remy flushmount fixture features a textured black frame with weathered wood accents and a mesh design, creating an industrial aesthetic. It is designed for indoor use and requires three candelabra base bulbs (E12), 60 watts maximum each, which are sold separately.
2. Sikkerhedsoplysninger
For din sikkerhed skal du altid huske at:
- ADVARSEL: Disconnect power at the main fuse or circuit breaker box before beginning installation or performing any maintenance.
- Kontakt en kvalificeret elektriker, hvis du er usikker på installationsprocessen.
- Sørg for, at alle elektriske forbindelser overholder lokale forskrifter og bestemmelser samt den nationale elektriske kode (NEC).
- Overskrid ikke det maksimale wattage specified for the bulbs (60 watts per bulb).
- Håndter armaturet forsigtigt for at undgå skader.
- Dette armatur er kun designet til indendørs brug.
3. Pakkens indhold
Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer service for assistance.
- Flushmount Ceiling Fixture (1)
- Mounting Hardware (e.g., mounting bracket, screws, wire nuts) (1 set)
- Instruktionsmanual (1)
Note: Bulbs are not included. This fixture requires three candelabra base (E12) bulbs, 60 watts maximum each.
4. Opsætning og installation
Follow these steps for proper installation of your flushmount ceiling fixture.
4.1 Nødvendigt værktøj (medfølger ikke)
- Skruetrækker (Phillips og/eller flad)
- Trådstrippere
- Elektrisk tape
- Stige
4.2 Forinstallation
- Sluk for strømmen ved afbryderen eller sikringsboksen.
- Carefully remove the old fixture (if applicable).
- Unpack the new fixture and lay out all parts on a clean, flat surface.
4.3 Montering af armaturet
- Attach the mounting bracket to the junction box in the ceiling using the provided screws. Ensure the bracket is securely fastened.
- Tilslut de elektriske ledninger:
- Connect the bare copper or green ground wire from the fixture to the ground wire from the junction box using a wire nut.
- Connect the white (neutral) wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
- Connect the black (hot) wire from the fixture to the black (hot) wire from the junction box using a wire nut.
- Wrap electrical tape around each wire nut connection for added security.
- Stik forsigtigt alle ledninger ind i samledåsen.
- Juster armaturbasen med monteringsbeslaget, og fastgør den med de medfølgende skruer.
4.4 Montering af pære
- Screw three candelabra base (E12) bulbs (not included) into the sockets. Do not exceed 60 watts per bulb.
Image 1: The allen + roth Remy Flushmount Ceiling Fixture showing its dimensions of 14 inches length, 14 inches width, and 6 inches height. This image provides a visual reference for planning installation space.
5. Betjeningsvejledning
- Once installation is complete, restore power at the circuit breaker or fuse box.
- Turn on the light switch connected to the fixture.
- This fixture is dimmable and compatible with standard wall dimmers (sold separately). Ensure you use dimmable bulbs if you intend to use a dimmer switch.
- While the product specifications mention "App" and "Remote Control" for control methods, these typically refer to optional smart home integrations or accessories not included with the basic fixture. The primary control is via a standard wall switch.
6. Vedligeholdelse
To maintain the appearance and functionality of your fixture:
- ADVARSEL: Sluk altid for strømmen til armaturet inden rengøring.
- Tør armaturet af med en blød, tør klud.
- Brug ikke slibende rengøringsmidler, opløsningsmidler eller polermidler, da de kan beskadige finishen.
- Periodically check all electrical connections for tightness.
7. Fejlfinding
Hvis du oplever problemer med dit armatur, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. |
|
|
| Lyset flimrer eller dæmpes forkert. |
|
|
If the problem persists after trying these solutions, contact a qualified electrician or customer support.
8. Specifikationer
Image 2: The allen + roth Remy Flushmount Ceiling Fixture, showcasing its industrial design with a black frame, weathered wood accents, and mesh details.
| Mærke | Allen + Roth |
| Modelnavn | Remy |
| Armaturtype | Flush Mount Loftslampe |
| Farve | Sort |
| Materiale | Legeret stål, træ |
| Produktdimensioner | 14 cm L x 14 cm B x 6 cm H |
| Indendørs/Udendørs brug | Indendørs |
| Strømkilde | Elektrisk med ledning |
| Antal lyskilder | 3 |
| Pære base type | Kandelaber (E12) |
| Max Wattage pr. pære | 60 watt |
| Dæmpbar | Yes (compatible with standard wall dimmer) |
| Varens vægt | 8.43 pund |
| UPC | 782042315716 |
9. Garanti og support
Specific warranty information for this product may vary. Please refer to the documentation included with your purchase or contact the retailer or manufacturer directly for details regarding warranty coverage and customer support.
For technical assistance or inquiries, please contact allen + roth customer service through their official webwebstedet eller forhandleren, hvor produktet blev købt.
