Indledning
Billede: The JALL Analog Alarm Clock in Skyblue, presented from a slight angle.
Thank you for choosing the JALL Analog Alarm Clock. This manual provides detailed instructions for setting up, operating, and maintaining your new alarm clock. Please read this manual thoroughly before use to ensure proper function and longevity of the product.
Produkt overview
The JALL Analog Alarm Clock is designed for simplicity and reliability. Key features include a silent, non-ticking sweep second hand, a loud alarm, and a soft night light function. Its compact size makes it suitable for various settings.
Nøglefunktioner:
- Lydløs drift: The sweep second hand moves continuously without producing any ticking noise, ensuring a quiet environment.
- Høj alarm: An effective alarm designed to wake users, capable of sounding for up to 30 minutes.
- Natlys: A soft, yellow light illuminates the clock dial when activated, providing visibility in the dark while being gentle on the eyes.
- Batteridrevet: Requires one AA battery for all functions.
- Holdbart design: Constructed from high-quality materials for reliable performance.
Billede: The JALL Analog Alarm Clock positioned near a sleeping baby, visually representing its silent, non-ticking operation.
Komponenter:
Refer to the image below for an illustration of the clock's components and controls located on the back panel.
Billede: Bag view of the JALL Analog Alarm Clock, highlighting and labeling its various controls and features, including the Light button, Set Time knob, Alarm Speaker, Battery Compartment, Battery Cover, Alarm ON/OFF switch, and Set Alarm knob.
- Lys knap: Press to activate the night light.
- Set Time Knob: Rotate to adjust the current time displayed by the hour and minute hands.
- Alarm Speaker: The component from which the alarm sound is emitted.
- Batterirum: The housing for the AA battery.
- Batteridæksel: A removable cover that secures the battery within its compartment.
- Alarm ON/OFF kontakt: A toggle switch to enable or disable the alarm function.
- Set Alarm Knob: Rotate to adjust the position of the alarm hand to the desired alarm time.
Opsætning
1. Batteriinstallation
- Find batterirummet på bagsiden af uret.
- Remove the battery cover by sliding or lifting it off.
- Insert one AA battery (not included), ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Sæt batteridækslet forsvarligt på plads.
Billede: The JALL Analog Alarm Clock on a surface, with an overlay indicating the battery compartment and the requirement for a single AA battery.
2. Indstilling af det aktuelle klokkeslæt
- Find Set Time Knob on the back of the clock.
- Rotate this knob clockwise or counter-clockwise until the hour and minute hands display the correct current time.
Betjeningsvejledning
Indstilling af alarm
- Find Set Alarm Knob on the back of the clock.
- Rotate this knob to move the alarm hand to your desired alarm time.
- For at aktivere alarmen skal du skubbe Alarm ON / OFF-kontakt to the "ON" position.
- For at deaktivere alarmen skal du skubbe Alarm ON / OFF-kontakt til "OFF"-positionen.
Brug af natlyset
- In low-light conditions, press and hold the Lys knap on the back of the clock.
- The clock face will illuminate with a soft, yellow light.
- Slip knappen for at slukke lyset.
Billede: The JALL Analog Alarm Clock in a dimly lit setting, showcasing its warm night light illuminating the clock face. An inset highlights the night light button on the clock's rear.
Opretholdelse
Rensning
- Tør uret af med en blød, tør klud.
- Do not use abrasive cleaners, chemical sprays, or solvents, as these may damage the clock's finish or internal components.
Udskiftning af batteri
- When the clock hands begin to move slowly, or the alarm sound weakens, it indicates that the battery needs replacement.
- Følg trinene til batteriinstallation, der er beskrevet i afsnittet "Opsætning".
- Dispose of used batteries responsibly according to local environmental regulations.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Clock is not running or running slowly. | The AA battery is depleted or incorrectly installed. | Replace the AA battery, ensuring correct polarity (+ and -) alignment. |
| Alarmen lyder ikke. | The alarm function is not activated, the alarm time is incorrectly set, or the battery is low. | Sørg for Alarm ON / OFF-kontakt is in the "ON" position. Verify the alarm hand is accurately set to the desired wake-up time. Check and replace the battery if necessary. |
| Natlyset virker ikke. | Batteriet er lavt eller afladet. | Udskift AA-batteriet. |
| Clock makes a ticking noise. | This model is designed with a silent, non-ticking sweep second hand. A ticking noise indicates a potential malfunction. | Contact JALL customer support for further assistance. |
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | JALL |
| Model | B08L4VPXGT |
| Display Type | Analog |
| Særlige funktioner | Alarm, Loud Alarm, Silent Clock, Night Light |
| Strømkilde | Batteridrevet (1 x AA batteri, medfølger ikke) |
| Produktdimensioner | 4.25"W x 4.5"H (approximately 10.8 cm W x 11.4 cm H) |
| Varens vægt | 8.6 ounce (ca. 244 gram) |
| Rammemateriale | Acrylonitril-butadienstyren |
| Farve | Himmelblå |
| Indendørs/Udendørs brug | Indendørs |
Billede: The JALL Analog Alarm Clock displayed with its approximate width (4.25 inches) and height (4.5 inches) dimensions.
Garanti og support
JALL offers a 365-Day Garanti on products sold on Amazon. This warranty covers manufacturing defects and ensures product reliability. For any questions, concerns, or support needs regarding your JALL Analog Alarm Clock, please contact JALL customer service through the Amazon platform or visit the official JALL store page for more information.
JALL Store: Visit the JALL Store on Amazon
