Sygonix SY-4504968 Digital Indbygget Timer Brugermanual

1. Introduktion

The Sygonix SY-4504968 Digital Timer is designed for automated control of electrical devices, such as lighting, in homes or offices. This versatile timer offers 15 programmable configurations, including weekly settings, allowing for up to 20 switching times per day, totaling 140 switching points per week. It features automatic summer and winter time adjustment, a countdown function, and a random mode. The timer supports both flush and surface mounting.

Please read this manual thoroughly before installation and operation to ensure correct usage and to prevent damage.

Figur 1: Front view of the Sygonix SY-4504968 Digital Built-in Timer, showing the digital display and the main power button.

2. Sikkerhedsinstruktioner

• Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med lokale el-forskrifter og -regler.
• Ensure the power supply is disconnected before installation, maintenance, or any wiring work.
• The device requires a neutral wire for operation. Verify its presence in your electrical box.
• Do not exceed the maximum load capacity of 1800 W.
• Udsæt ikke enheden for fugt, ekstreme temperaturer eller direkte sollys.
• Forsøg ikke at skille enheden ad eller ændre den. Overlad al service til kvalificeret personale.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• Sygonix SY-4504968 Digital Built-in Timer
• Surface mount frame
• Monteringsskruer og vægpropper
• Brugsanvisning

4. Produktet er slutview

The timer features a digital display and control buttons located behind a protective cover.

Figur 2: Nærbillede view of the timer's digital display, showing time, day (TU for Tuesday), and 'PROG' and 'ON' indicators.

Figur 3: The timer with its protective cover open, revealing the control buttons for programming and settings.

4.1. Displayindikatorer

• Tidsvisning: Shows current time in HH:MM format.
• Day Indicator: Displays the current day of the week (e.g., MO, TU, WE).
• PROG: Indicates that a program is active or being set.
• TIL/FRA: Indicates the current switching state of the connected device.

4.2. Control Buttons (behind cover)

• Clock/Set Button: Bruges til at indstille det aktuelle klokkeslæt og den aktuelle dag.
• PROG knap: Går ind i programindstillingstilstand.
• RND (Tilfældig) knap: Activates/deactivates random switching mode.
• CD (Countdown) Button: Aktiverer/deaktiverer nedtællingsfunktionen.
• +/- knapper: Used to adjust values (time, program settings).
• R (Reset) Button: Resets the timer to factory defaults.

5. Installation

The timer can be installed either flush-mounted into a wall box or surface-mounted using the provided frame.

5.1. Ledningsdiagram

Vigtig: Ensure the main power supply is switched off before proceeding with any wiring. This device requires a neutral wire connection.

Connect the Live (L), Neutral (N), and Switched Live (L') wires according to the diagram provided with the product. The neutral wire is essential for the timer's internal clock and display to function.

5.2. Flush Mounting

1. Prepare a standard wall box (minimum depth of 50mm recommended for easier wiring).
2. Connect the electrical wires to the terminals on the back of the timer as per the wiring diagram.
3. Carefully push the timer into the wall box, ensuring wires are not pinched.
4. Fastgør timeren til vægboksen med de medfølgende skruer.
5. Attach the front cover plate.

Figur 4: The digital timer flush-mounted into a wall, blending with the room's decor.

5.3. Surface Mounting

1. Attach the surface mount frame to the wall using the provided screws and wall plugs.
2. Connect the electrical wires to the terminals on the back of the timer.
3. Insert the timer into the surface mount frame, ensuring a secure fit.
4. Attach the front cover plate.

Figur 5: Side view of the timer, illustrating its depth for installation considerations.

6. Opsætning

6.1. Initial Power-On and Reset

After installation and restoring power, the display will light up. If the display is erratic or shows incorrect values, press the R (Nulstil) button with a pointed object (e.g., a pen tip) to clear all settings and restore factory defaults.

6.2. Indstilling af aktuel tid og dag

1. Open the protective cover to access the control buttons.
2. Tryk og hold på Clock/Set button for approximately 3 seconds until the time display flashes.
3. Brug +/- knapperne for at justere timetallet. Tryk på Clock/Set igen for at bekræfte og gå til minutter.
4. Brug +/- knapperne for at justere minutterne. Tryk på Clock/Set again to confirm and move to day.
5. Brug +/- buttons to select the current day of the week (MO, TU, WE, TH, FR, SA, SU).
6. Trykke Clock/Set one last time to save the settings and exit the time setting mode.

6.3. Automatic Summer/Winter Time Adjustment

The timer is equipped with an automatic summer/winter time adjustment feature. This function typically activates automatically based on pre-programmed dates. No manual intervention is usually required for this feature.

7. Betjening

7.1. Programmering af ugentlige tidsplaner

The timer allows for up to 15 different program configurations, with 20 switching times per day, totaling 140 switching points per week.

1. Tryk på PROG button to enter program setting mode. The display will show '1 ON' (for program 1, switch-on time).
2. Brug +/- buttons to set the desired switch-on hour. Press PROG for at bekræfte og gå til minutter.
3. Brug +/- buttons to set the desired switch-on minutes. Press PROG to confirm and move to day selection.
4. Brug +/- buttons to select the day(s) for this program. You can choose individual days, blocks of days (e.g., MO-FR), or all days. Press PROG for at bekræfte.
5. The display will now show '1 OFF' (for program 1, switch-off time). Repeat steps 2-4 to set the switch-off time and day(s) for this program.
6. After setting the 'OFF' time, press PROG again to move to the next program ('2 ON') or to exit program setting mode if no more programs are needed.
7. To exit program mode at any time, press the Clock/Set knap.

7.2. Nedtællingsfunktion

The countdown function allows you to set a specific duration after which the connected device will switch ON or OFF.

1. Tryk på CD (Countdown) button. The display will show 'CD' and a default countdown time.
2. Brug +/- buttons to adjust the desired countdown duration (hours and minutes).
3. Trykke CD again to start the countdown. The device will switch its state (ON to OFF, or OFF to ON) once the countdown finishes.
4. Tryk på for at annullere nedtællingen CD button again during the countdown.

7.3. Tilfældig tilstand

The random mode switches the connected device ON and OFF at irregular intervals, simulating presence for security purposes.

1. Tryk på RND (Random) button. The display will show 'RND'.
2. The timer will now activate and deactivate the connected device at random times within a predefined period (e.g., 30 minutes to 2 hours).
3. For at deaktivere tilfældig tilstand skal du trykke på RND button again. The 'RND' indicator will disappear.

8. Vedligeholdelse

• Rengør enheden med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• The internal battery (if present for memory backup) is typically long-lasting and not user-replaceable. If the timer loses settings during power outages, the battery may need professional replacement.

9. Fejlfinding

10. Specifikationer

• Model: SY-4504968
• Fabrikant: Sygonix
• Voltage: 230 volt
• Maks. Indlæs: 1800 W
• Produktmål (L x B x H): 12 x 9 x 8 cm
• Vægt: 230 gram
• Skærmtype: Digital
• Antal programmer: 15
• Switching Points: Up to 140 per week (20 per day)
• Batterier påkrævet: Yes (for internal clock/memory backup, typically not user-replaceable)

11. Garanti og support

Sygonix products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your purchase or visit the official Sygonix website. For technical support, troubleshooting assistance, or spare parts, please contact your retailer or the Sygonix customer service department.