Scheppach HS110 Bordrundsav Brugermanual

1. Introduktion

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Scheppach HS110 Table Saw. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.

The Scheppach HS110 is a powerful 2000W table saw designed for cutting wood with a 254mm blade. It operates on a 230V, 50Hz power supply and features depth adjustment for versatile cutting applications.

2. Sikkerhedsinstruktioner

Prioritér altid sikkerheden, når du bruger elværktøj. Manglende overholdelse af disse instruktioner kan resultere i alvorlig personskade eller materielle skader.

2.1 Generel sikkerhed

• Læs manualen: Forstå alle instruktioner og advarsler før brug.
• Arbejdsområde: Hold arbejdsområdet rent, godt oplyst og fri for rod.
• Børn og tilskuere: Hold børn og omkringstående væk, mens saven betjenes.
• Personligt beskyttelsesudstyr (PPE): Always wear safety glasses, hearing protection, and appropriate work gloves. Avoid loose clothing or jewelry.
• Elektrisk sikkerhed: Ensure the power supply matches the saw's requirements (230V, 50Hz). Do not operate in damp eller våde forhold.
• Bladbeskytter: Always use the blade guard unless specifically instructed otherwise for a particular operation.
• Stabil overflade: Ensure the table saw is placed on a stable, level surface.

2.2 Specifik sikkerhed ved bordrundsav

• Forebyggelse af tilbageslag: Use a push stick for narrow cuts. Never stand directly in line with the blade.
• Valg af klinge: Use the correct blade type for the material being cut. Ensure the blade is sharp and free from damage.
• Justeringer: Disconnect power before making any adjustments or changing blades.
• Materialestøtte: Always support the workpiece adequately, especially for long or wide pieces.

3. Samling og opsætning

Carefully unpack all components and verify against the packing list. If any parts are missing or damaged, contact Scheppach customer service.

3.1 Udpakning og inspektion

Remove the table saw and all accessories from the packaging. Inspect for any shipping damage. Keep packaging materials until you are sure all parts are present and the saw is functioning correctly.

3.2 Samling af stativet

Assemble the metal stand components according to the diagrams provided in the separate assembly sheet. Ensure all bolts are securely tightened for stability.

Figure 3.1: Fully assembled Scheppach HS110 Table Saw, showing the main unit mounted on its sturdy stand.

3.3 Attaching Table Extensions

The HS110 comes with side table extensions to increase the working surface. Attach these extensions to the main table using the provided hardware. Ensure they are level with the main table surface.

Figure 3.2: Detail of a table extension, illustrating its design and attachment points.

3.4 Montering af blad (hvis ikke forudinstalleret)

1. Afbryd strømmen: Unplug the saw from the power outlet.
2. Fjern tabelindsætning: Lift out the table insert plate around the blade.
3. Løsn spindelmøtrikken: Use the provided wrenches to loosen the arbor nut, holding the outer flange.
4. Installer bladet: Place the 254mm blade onto the arbor, ensuring the teeth are pointing towards the front of the saw (upwards at the cutting edge).
5. Sikker klinge: Reinstall the outer flange and arbor nut, tightening securely.
6. Replace Insert: Sæt bordindsatsen tilbage på plads.

4. Betjening

Before operating, ensure all safety precautions are understood and followed. Always wear appropriate PPE.

4.1 Tænd/sluk

• At tænde: Press the green "ON" button.
• At slukke: Press the red "OFF" button. In case of emergency, press the large red emergency stop button.

4.2 Adjusting Blade Depth

The blade depth can be adjusted using the handwheel on the front of the saw. Rotate the handwheel clockwise to raise the blade and counter-clockwise to lower it. For through cuts, the blade should extend approximately 3-6mm above the workpiece.

4.3 Justering af skråvinkel

The blade can be tilted for bevel cuts. Loosen the bevel locking knob, adjust the blade to the desired angle (0-45 degrees) using the angle scale, and then re-tighten the locking knob.

4.4 Using the Rip Fence

The rip fence is used for making accurate parallel cuts. Position the fence to the desired width, ensuring it is parallel to the blade. Lock the fence securely in place before making a cut.

Figure 4.1: A user demonstrating the proper technique for feeding a workpiece through the table saw, emphasizing the use of the rip fence.

4.5 Foretagelse af nedskæringer

1. Forbered emnet: Sørg for, at emnet er fri for søm, skruer eller andre fremmedlegemer.
2. Opsætning: Adjust blade depth and angle, and position the rip fence or miter gauge as needed.
3. Start saven: Tænd for saven og lad klingen nå fuld hastighed.
4. Fodermateriale: Slowly and steadily feed the workpiece into the blade. Use a push stick for narrow cuts or when your hands are close to the blade.
5. Komplet snit: Continue feeding until the cut is complete. Do not remove off-cuts until the blade has stopped.
6. Sluk saven: Press the "OFF" button and wait for the blade to stop completely before leaving the machine.

Figure 4.2: A user performing a cut on the Scheppach HS110, highlighting the importance of proper hand placement and material support.

5. Vedligeholdelse

Regular maintenance ensures the longevity and safe operation of your Scheppach HS110 Table Saw. Always disconnect the power before performing any maintenance.

• Rensning: After each use, clean sawdust and debris from the table, blade guard, and motor housing using a brush or vacuum cleaner. Do not use solvents.
• Bladinspektion: Regularly inspect the saw blade for sharpness, cracks, or missing teeth. Replace damaged blades immediately.
• Bevægelige dele: Check all moving parts for proper alignment and smooth operation. Lubricate as necessary with a dry lubricant.
• Fastgørelsesmidler: Periodically check all nuts, bolts, and screws for tightness and re-tighten if loose.
• Strømledning: Inspect the power cord for any damage or fraying. Replace if damaged.

6. Fejlfinding

This section addresses common issues you might encounter with your table saw. For problems not listed here, contact customer support.

7. Specifikationer

8. Garanti og support

Scheppach products are manufactured to high-quality standards. For warranty information, technical support, or to order replacement parts, please refer to the official Scheppach webwebsted eller kontakt deres kundeserviceafdeling.

Note: Spare parts availability information is not available in the provided product data.

For yderligere hjælp, besøg venligst Scheppach official webwebsted.