1. Introduktion
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Clarke EX20 100H Carpet Extractor. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.
Figure 1: The Clarke EX20 100H Carpet Extractor, a powerful machine designed for deep carpet cleaning.
2. Sikkerhedsoplysninger
Overhold altid følgende sikkerhedsforanstaltninger for at mindske risikoen for brand, elektrisk stød eller personskade.
- Læs alle instruktioner: Familiarize yourself with the machine's operation before use.
- Elektrisk sikkerhed: Ensure the power cord and plug are in good condition. Do not operate with a damaged cord or plug. Connect to a properly grounded outlet only.
- Kemikalier: Use only recommended cleaning solutions. Follow manufacturer's instructions for chemical handling and disposal.
- Ventilation: Arbejd i et godt ventileret område.
- Personligt beskyttelsesudstyr (PPE): Wear appropriate PPE, such as gloves and eye protection, when handling cleaning solutions or operating the machine.
- Overvågning: Lad ikke børn eller uuddannet personale betjene maskinen.
- Opbevaring: Store the machine in a dry, secure location away from extreme temperatures.
- Opretholdelse: Afbryd strømmen, før du udfører vedligeholdelse eller rengøring.
3. Opsætning
Follow these steps to prepare your Clarke EX20 100H for operation:
- Unpack the Extractor: Carefully remove the unit from its packaging. Inspect for any shipping damage.
- Saml håndtaget: Attach the handle assembly to the main unit. Ensure all fasteners are securely tightened.
- Fyld opløsningstanken: Open the solution tank cap. Fill the tank with the appropriate carpet cleaning solution mixed according to the solution manufacturer's instructions. Do not overfill.
- Tilslut slanger: Connect the vacuum hose and solution hose to the appropriate ports on the machine and the cleaning wand. Ensure connections are secure to prevent leaks.
- Tilslut: Tilslut netledningen til en jordet stikkontakt.
Figure 2: Accessing the internal components and tanks of the Clarke EX20 100H by lifting the top cover.
4. Betjeningsvejledning
Once the unit is set up, follow these steps for effective carpet extraction:
- Pre-vakuum: Støvsug tæppeområdet grundigt for at fjerne løst snavs og snavs inden udsugning.
- Tænd for strømmen: Locate the control panel on the machine. Turn on the vacuum and pump switches. The Clarke EX20 100H operates at 100 PSI.
- Begynd rengøring: With the cleaning wand, make slow, overlapping passes over the carpet. Depress the solution trigger to apply cleaning solution while pulling the wand towards you to extract the dirty water.
- Tøm genbrugstank: When the recovery tank is full (indicated by a decrease in vacuum suction or a float shut-off), turn off the machine, disconnect the wand, and empty the dirty water into a suitable drain.
- Genopfyldningstank: Refill the solution tank as needed.
- Skylning (valgfrit): For heavily soiled carpets or to remove detergent residue, you may perform a rinse pass using only clean water in the solution tank.
- Efterrengøring: Allow the carpet to dry completely before allowing foot traffic. Use fans or open windows to aid drying.
Figure 3: The control panel features clearly labeled switches for activating the spray, vacuum, and heating functions.
5. Vedligeholdelse
Regular maintenance ensures the longevity and optimal performance of your extractor.
- Efter hver brug:
- Empty and rinse both the solution and recovery tanks with clean water.
- Clean the recovery tank filter to prevent clogs.
- Rinse the cleaning wand and hoses.
- Tør maskinens ydre af med adamp klæde.
- Månedlig:
- Undersøg slanger og forbindelser for slid eller beskadigelse. Udskift om nødvendigt.
- Kontroller tilstanden af netledningen og stikket.
- Clean the spray jets on the wand to ensure even solution distribution.
- Opbevaring: Store the machine in a dry, climate-controlled environment. Do not store with water in the tanks.
6. Fejlfinding
Se tabellen nedenfor for almindelige problemer og deres løsninger.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen sugning | Recovery tank full; Clogged vacuum hose/filter; Loose hose connection; Damaged vacuum motor. | Empty recovery tank; Clean hose/filter; Secure connections; Contact service. |
| Ingen spray | Solution tank empty; Clogged spray jet; Pump not on; Damaged pump. | Refill solution tank; Clean spray jet; Turn on pump switch; Contact service. |
| Maskinen tænder ikke | No power to outlet; Power cord damaged; Internal electrical issue. | Check outlet/breaker; Inspect cord (replace if damaged); Contact service. |
| Lækker vand | Loose hose connections; Damaged seals/gaskets; Cracked tank. | Tighten connections; Inspect and replace seals; Contact service. |
7. Specifikationer
Key technical specifications for the Clarke EX20 100H Carpet Extractor:
| Feature | Detalje |
|---|---|
| Produkttype | Janitorial Supply |
| Pakkedimensioner | 52 x 45 x 28 tommer; 87 pund |
| Oprindelsesland | Mexico |
| Pakkevægt | 87.0 lbs |
| Varemodelnummer | EX20 100H |
| Dato først tilgængelig | 6. oktober 2020 |
| Fabrikant | Nilfisk, Inc. |
| ASIN | B08KSF87MX |
| Mærke | Clarke |
| Stil | Moderne |
| UPC | 706155019187 |
8. Hvad er der i æsken
The following items are included with your Clarke EX20 100H Carpet Extractor:
- Tæppeudsugningsenhed
9. Garanti og support
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact Clarke customer service. Keep your purchase receipt as proof of purchase for warranty claims.
For further assistance, you may visit the official Clarke webwebstedet eller kontakt din autoriserede forhandler.
