1. Introduktion
This manual provides comprehensive instructions for the installation, operation, and maintenance of the YANZEO SR692 UHF RFID Reader. The SR692 is an integrated UHF RFID reader designed for long-range identification applications, featuring a 9dBi antenna and various network output options. Please read this manual thoroughly before using the device to ensure proper functionality and safety.
2. Sikkerhedsoplysninger
- Sørg for, at strømforsyningen voltage opfylder enhedens krav.
- Udsæt ikke enheden for ekstreme temperaturer, fugtighed eller ætsende miljøer.
- Avoid direct exposure to the antenna during operation, as it emits radio frequency energy.
- Forsøg ikke at skille enheden ad eller ændre den. Overlad al service til kvalificeret personale.
- The device is rated IP67 for dust and water resistance, but avoid submerging it in water.
3. Pakkens indhold
Bekræft, at alle nedenstående varer er til stede i din pakke:
- YANZEO SR692 UHF RFID Reader Unit
- Strømadapter
- Monteringsbeslag og hardware
- RS232/RS485 Cable
- RJ45 Network Cable (may vary)
Figure 3.1: YANZEO SR692 UHF RFID Reader with its accessories and indicated dimensions (26cm x 26cm x 3.2cm). The image shows the main reader unit, power adapter, mounting hardware, and various cables including RS232/RS485 and RJ45 connectors.
4. Opsætning og installation
4.1 Fysisk installation
- Montering: Use the provided mounting bracket and hardware to securely attach the SR692 reader to a stable surface. Ensure the antenna side faces the desired reading area.
- Strømtilslutning: Connect the power adapter to the reader's power input port and then plug it into a suitable power outlet.
- Netværksforbindelse (RJ45): For network communication, connect an Ethernet cable from the reader's RJ45 port to your network switch or router.
- Serial Connection (RS232/RS485): If using serial communication, connect the appropriate cable to the reader's serial port and your host device.
- Wiegand Connection: For Wiegand output, connect the Wiegand interface to your access control system.
Figur 4.1: Bagside view of the YANZEO SR692 reader, illustrating the various cable connections including power, RJ45, and serial ports.
4.2 Softwarekonfiguration
After physical installation, the reader typically requires software configuration for optimal performance and integration with your system. This may involve setting IP addresses, communication parameters (baud rate for serial), and specific RFID tag reading modes. Refer to the accompanying software development kit (SDK) or configuration utility for detailed instructions on software setup.
5. Betjeningsvejledning
5.1 Grundlæggende betjening
Once powered on and configured, the SR692 reader continuously emits a UHF radio frequency field. When an RFID tag compatible with the supported protocols (ISO18000-6C/EPC Gen2, ISO18000-6B) enters this field, the reader will detect the tag and read its unique identification data. This data is then transmitted via the configured interface (RJ45, RS232, RS485, or Wiegand) to the connected host system.
5.2 Reading Distance and Performance
The SR692 is designed for long-range reading, with an effective reading distance of up to 9 meters (approximately 30 feet) under ideal conditions. Factors affecting reading performance include:
- Tag Type: Passive UHF RFID tags.
- Tag Orientering: Optimal reading occurs when the tag is oriented correctly relative to the antenna.
- Miljøforstyrrelser: Metal objects, liquids, and other RF devices can affect performance.
- Antenneplacering: Proper positioning of the integrated 9dBi antenna is crucial for maximizing read range and coverage.
Figur 5.1: Forside view of the YANZEO SR692 UHF RFID Reader, showing its robust casing and integrated antenna design.
6. Vedligeholdelse
- Rensning: Use a soft, dry cloth to clean the exterior of the reader. Do not use abrasive cleaners or solvents.
- Miljøforhold: While the device has an IP67 rating, it is recommended to install it in a location that minimizes direct exposure to harsh weather conditions or extreme temperatures to prolong its lifespan.
- Kabelinspektion: Periodically inspect all connected cables for signs of wear or damage. Replace damaged cables immediately.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Reader not powering on. | Ingen strømforsyning; defekt strømadapter; løs forbindelse. | Check power outlet; ensure power adapter is securely connected; test with a known good power adapter if available. |
| Kan ikke læse tags. | Tag out of range; incorrect tag type; environmental interference; incorrect software configuration. | Flytte tag closer to the reader; ensure tags are UHF RFID; check for metal objects or other RF sources; verify software settings. |
| Problemer med netværksforbindelse. | Incorrect IP address; faulty Ethernet cable; network configuration problem. | Verify IP settings; check Ethernet cable; consult network administrator. |
| Inkonsekvent tag læser. | Tag orientation; multiple tags in field; interference. | Tilpasse tag orientation; manage tag density; reduce environmental interference. |
8. Specifikationer
- Model: SR692
- Mærke: Yanzeo
- Understøttede protokoller: ISO18000-6C/EPC Gen2, ISO18000-6B
- Arbejdshyppighed: 860-960MHz (wide band)
- Antenne: Integrated 9dBi
- Læseafstand: Op til 9 meter (ca. 30 fod)
- Grænseflader: RJ45 (Network), RS232, RS485, Wiegand
- Ingress Protection (IP) Rating: IP67
- Dimensioner: Approximately 26cm x 26cm x 3.2cm (15.43 x 10.67 x 2.99 inches)
- Vægt: Cirka 1.56 kg (3.44 pund)
- Hardwaregrænseflade: USB
- Dataoverførselshastighed: 5000 megabit pr. sekund
9. Garanti og support
For warranty information and technical support, please contact your point of purchase or visit the official Yanzeo webwebsted. Behold din købskvittering som købsbevis i tilfælde af garantikrav.
Yanzeo Store: https://www.amazon.com/stores/Yanzeo/page/47DF12D1-A192-426D-99DE-03F0F94ED170
