1. Introduktion
Thank you for choosing the Lepro 20W LED Floodlight. This manual provides essential information for the safe installation, operation, and maintenance of your new floodlights. Please read these instructions carefully before use and retain them for future reference.
Image 1.1: Two Lepro 20W LED Floodlights with power cable. These floodlights are designed for outdoor use, providing bright and efficient illumination.
2. Sikkerhedsinstruktioner
For at sikre sikker drift skal du altid følge disse retningslinjer:
- Elektrisk sikkerhed: Ensure the power supply is disconnected before installation or maintenance. All electrical connections must comply with local wiring regulations. If unsure, consult a qualified electrician.
- Jording: The floodlight must be properly grounded to prevent electric shock.
- Voltage: Kontroller, at forsyningen voltage matches the floodlight's rated voltage (240 volt AC).
- Vandtæthed: The product is IP65 rated, meaning it is protected against dust ingress and low-pressure water jets from any direction. However, do not submerge the unit in water.
- Varme: The floodlight generates heat during operation. Do not cover the unit or install it in an enclosed space without adequate ventilation.
- Montering: Ensure the mounting surface is strong enough to support the weight of the floodlight.
- Lyskilde: Do not stare directly into the LED light source when it is illuminated, as this may cause eye strain or damage.
3. Pakkens indhold
Din pakke skal indeholde følgende varer:
- 2 x Lepro 20W LED Floodlights
- Instruktionsmanual (dette dokument)
4. Produktfunktioner
The Lepro 20W LED Floodlight offers the following key features:
- Ultra-Bright and Energy-Efficient: Utilizes SMD 2835 LEDs and an optimized reflector design to deliver 1700 lumens of daylight white light (5000K) with only 20W of power consumption, equivalent to a 140W halogen lamp.
- Holdbar og vejrbestandig: Constructed from die-cast aluminum and tempered glass, with an IP65 rating for resistance against dust and water, suitable for all weather conditions.
- Effektiv varmeafledning: Features an ultra-thin housing and integrated heat sink design for effective heat management, extending the product's lifespan.
- Bred strålevinkel: Provides a 110° beam angle for broad illumination coverage.
- 360° Rotatable Bracket: The mounting bracket allows for 360° rotation, enabling flexible adjustment of the light direction.
- Nem installation: Designed for straightforward installation on various surfaces.
Image 4.1: Key lighting specifications of the floodlight, including LED quantity, color temperature, brightness, and beam angle.
Image 4.2: Illustration of the floodlight's coverage, demonstrating that 20W provides 1700 lumens, effectively illuminating a 5-meter diameter area when mounted at 4 meters height.
Image 4.3: The rear of the floodlight, illustrating the heat dissipation fins designed to efficiently release heat and prolong the product's lifespan.
Image 4.4: The 360° rotatable bracket, allowing for flexible adjustment of the light direction to suit various illumination needs.
Image 4.5: Demonstrates the floodlight's durability and weather resistance, highlighting its IP65 waterproof rating, heat resistance, and frost resistance for reliable performance in diverse outdoor conditions.
5. Specifikationer
| Attribut | Værdi |
|---|---|
| Mærke | Lepro |
| Modelnummer | PR340011-DW-EU-2 |
| Produktmål (L x B x H) | 10.82 x 2.6 x 9.6 cm |
| Vægt | 540 gram |
| IP-vurdering | IP65 |
| Antal genstande | 2 |
| Stil | Moderne |
| Farve | Cool White/Black |
| Materiale | Aluminum, Tempered Glass |
| Maks. Watttage | 20 watt |
| Voltage | 240 volt (AC) |
| Specifikke anvendelser | Outdoor and enclosed spaces |
| Særlige funktioner | Energieffektiv |
| Lysstrøm | 1700 lm |
| Color Rendering Index (CRI) | 80.00 |
| Strømkilde | AC |
| Installationstype | Vægmontering |
Image 5.1: Detailed dimensions of the floodlight, including length, width, and height, along with cable length, provided in both millimeters and inches for precise planning.
6. Installation
Følg disse trin for korrekt installation:
- Forberedelse: Before starting, ensure the power supply is turned off at the main circuit breaker.
- Monteringssted: Choose a suitable location for the floodlight. The included bracket allows for mounting on walls, ceilings, or directly on the ground.
- Mærkning: Use the bracket as a template to mark the drilling points on the desired surface.
- Boring: Drill holes at the marked points. Insert appropriate wall plugs if mounting on masonry.
- Sikkert beslag: Attach the bracket securely to the surface using screws (not included). The bracket features 2 self-locking screws for easy removal of the spot without tools.
- Juster vinkel: The bracket is 360° rotatable. Adjust the floodlight to the desired angle before tightening the bracket screws.
- Ledningsføring: Connect the floodlight's 1-meter power cable to your electrical supply. Ensure correct wiring: brown wire for Live, blue wire for Neutral, and green/yellow wire for Ground. Use a waterproof junction box for outdoor connections (not included).
- Endelig kontrol: Double-check all connections and ensure the floodlight is securely mounted.
- Tænd: Genopret strømmen ved hovedafbryderen.
Image 6.1: Various installation methods for the floodlight, demonstrating its versatility for mounting on walls, ground, or ceilings.
7. Betjening
Once installed and connected to a power source, the Lepro 20W LED Floodlight will illuminate when power is supplied. There are no additional controls on the unit itself. Operation is typically controlled via an external switch or timer connected to the power circuit.
Billede 7.1: Eks.amples of the floodlight in various applications, including residential and commercial outdoor spaces, showcasing its effective illumination.
8. Vedligeholdelse
The Lepro LED Floodlight requires minimal maintenance:
- Rensning: Periodically clean the glass surface with a soft, damp cloth to ensure optimal light output. Do not use abrasive cleaners or solvents.
- Inspektion: Regularly inspect the power cable and housing for any signs of damage. If damage is found, disconnect power immediately and have the unit inspected by a qualified professional.
- Ingen dele, der kan serviceres af brugeren: The LED light source is integrated and not replaceable by the user. Do not attempt to open the housing.
9. Fejlfinding
Hvis du støder på problemer med din projektør, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tænder ikke | Ingen strømforsyning Løs ledningsforbindelse Faulty external switch | Kontroller strømforsyning og afbryder. Verify all wiring connections are secure (ensure power is off first). Test the external switch or bypass it temporarily. |
| Lyset er svagt eller flimrer | Ustabil strømforsyning Forkert voltage Beskadiget enhed | Sørg for stabil strømforsyning. Bekræft input voltage matcher specifikationerne. Kontakt kundesupport, hvis problemerne fortsætter. |
| Vand inde i enheden | Forkert installation Damage to housing/seal | Ensure all seals are intact and installation is correct. Disconnect power immediately. Contact customer support. |
If the problem persists after attempting these solutions, please contact Lepro customer support.
10. Garanti og support
Lepro products are designed for reliability and performance. For warranty information or technical support, please refer to the official Lepro webwebstedet eller kontakt deres kundeservice direkte. Behold din købskvittering som købsbevis.
For mere information, besøg Lepro Store.
