Pyle PVTA80 Bluetooth rør Amplifier modtager brugermanual

1. Introduktion

This manual provides detailed instructions for the Pyle PVTA80 Bluetooth Tube Amplifier Receiver. This 500W peak power stereo amplifier is designed for home audio systems, featuring vacuum tube technology for enhanced sound quality, Bluetooth wireless streaming, USB playback, and multiple audio inputs. Please read this manual thoroughly before operating the device to ensure proper use and longevity.

2. Nøglefunktioner

• 4 Vacuum Tube Power Amplivligere: Delivers 500W peak power with vacuum tubes, known for producing a warm and rich audio experience.
• Bluetooth trådløs streaming: Seamlessly connects to smartphones, tablets, laptops, and other Bluetooth-enabled devices for audio playback. Features Bluetooth Version 4.2 with a wireless range of 40+ feet.
• Built-in USB Playback: Supports MP3 audio playback directly from a USB drive.
• Flere lydindgange: Includes two CD/DVD (L/R) RCA inputs for connecting external audio sources.
• Subwooferudgang: Dedicated output for connecting an external subwoofer.
• Højttalerudgange: Two speaker outputs supporting 4-8 ohm speakers.
• Øverste panelkontroller: Easy access to input selection, play/pause, previous/next song, and master volume.
• LED display: Blue LED screen provides media playback information.
• Integreret køleventilator: Prevents overheating during extended operation.
• Fjernbetjening: Fuldfunktionel fjernbetjening for nem betjening.

Image: The Pyle PVTA80 amplifer showcasing its four vacuum tubes, positioned between two bookshelf speakers, highlighting its audio capabilities.

3. Hvad er der i æsken

• Pyle PVTA80 Bluetooth rør Amplivligere modtager
• Strømkabel
• Remote Control (requires 2x 'AAA' batteries, not included)

Image: The Pyle PVTA80 amplifier shown alongside its remote control, with key dimensions (length, width, height) indicated.

4. Produktet er slutview

4.1 Betjeningselementer på frontpanelet

Billede: Forside view of the Pyle PVTA80 amplifier, displaying the vacuum tubes, control knobs, LED screen, and the included remote control.

• Tænd / sluk-kontakt: Skifter mellem amplifiers kraft.
• Indgangsvalg: Cycles through available audio inputs (Bluetooth, USB, CD/DVD).
• USB-læser: Port for USB flash drives for MP3 playback.
• Master Volume Controller: Justerer den samlede udgangslydstyrke.
• Forrige/næste sang: Navigates tracks during USB or Bluetooth playback.
• Afspil/pause funktion: Controls playback for USB or Bluetooth sources.
• LED skærm: Shows current input mode and playback information.

4.2 Bagpaneltilslutninger

Billede: Bagside view of the Pyle PVTA80 amplifier, detailing the various input and output ports, including CD/DVD inputs, subwoofer output, speaker terminals, and power input.

• CD/DVD Inputs (L/R): RCA jacks for connecting external audio sources like CD/DVD players.
• Subwooferudgang: RCA jack for connecting an active subwoofer.
• Højttalerudgange: Binding posts for connecting passive speakers (4-8 ohms).
• AC 120V/240V Input: Strømtilslutning til amplivligere.
• 120V/240V Voltage Vælger: Switch to select appropriate voltage for din region.
• Køleventilator: Integrated fan for thermal management.

Billede: Nærbillede views highlighting the built-in cooling fan, USB reader, and the subwoofer and speaker output connections on the Pyle PVTA80 amplivligere.

5. Opsætningsvejledning

1. Udpakning: Fjern forsigtigt amplifier and all accessories from the packaging.
2. Placering: Placer amplifier on a stable, flat surface with adequate ventilation. Ensure the cooling fan is not obstructed.
3. Voltage Valg: Before connecting the power cable, verify the 120V/240V voltage selector on the rear panel matches your local power supply. Adjust if necessary using a small screwdriver.
4. Højttalerforbindelse: Connect your passive speakers to the "Speaker Output" binding posts on the rear panel. Ensure correct polarity (+ to + and - to -) for each speaker. The amplifier supports 4-8 ohm speakers.
5. Subwoofer Connection (Optional): If using an active subwoofer, connect its input to the "Subwoofer Output" RCA jack on the rear panel.
6. Lydkildeforbindelse:
   • For CD/DVD players or other analog sources, connect them to the "CD/DVD Input (L/R)" RCA jacks.
   • For USB playback, insert a USB flash drive into the "USB Reader" port on the front panel.
7. Strømtilslutning: Connect the supplied power cable to the AC 120V/240V input on the rear panel, then plug it into a wall outlet.

6. Betjeningsvejledning

1. Tænd: Press the Power ON/OFF switch on the front panel. The LED display will illuminate.
2. Valg af inputkilde: Use the "Input Select" button on the front panel or the remote control to cycle through the available input sources (Bluetooth, USB, CD/DVD). The selected input will be shown on the LED display.
3. Justering af lydstyrke: Rotate the "Master Volume Controller" knob on the front panel or use the VOL+/- buttons on the remote control to adjust the audio output level.
4. 6.1 Bluetooth-betjening
   • Select "Bluetooth" as the input source. The LED display will show "BLUE".
   • Søg efter tilgængelige Bluetooth-enheder på din Bluetooth-aktiverede enhed (smartphone, tablet osv.).
   • Select "Pyle Speaker" from the list to pair. A confirmation tone may sound upon successful pairing.
   • Når den er parret, kan du streame lyd fra din enhed til amplifier. Use your device or the amplifier's controls (Play/Pause, Previous/Next) to manage playback.
   

   Image: The Pyle PVTA80 amplifier with its LED display showing "BLUE", alongside a smartphone indicating a successful Bluetooth connection, demonstrating wireless audio streaming.

5. 6.2 USB-afspilning
   • Indsæt et USB-flashdrev med MP3-lyd files into the "USB Reader" port on the front panel.
   • Select "USB" as the input source. The amplifier will automatically begin playing MP3 files.
   • Use the Play/Pause, Previous/Next buttons on the front panel or remote control to manage playback.
   

   Image: A hand inserting a USB flash drive into the USB port on the front panel of the Pyle PVTA80 amplifier, illustrating the USB playback feature.

6. 6.3 CD/DVD Input
   • Ensure your CD/DVD player or other analog source is connected to the "CD/DVD Input (L/R)" RCA jacks on the rear panel.
   • Select "CD/DVD" as the input source.
   • Begin playback on your connected source device.

7. Vedligeholdelse

• Rensning: Brug en blød, tør klud til at rengøre ydersiden af ampBrug ikke flydende rengøringsmidler eller opløsningsmidler.
• Ventilation: Ensure the cooling fan and ventilation openings are free from dust and obstructions to prevent overheating.
• Rørpleje: The vacuum tubes are delicate. Avoid touching them when hot. If replacement is needed, consult a qualified technician.
• Opbevaring: Hvis enheden opbevares i længere tid, skal den afbrydes fra strømmen og opbevares et køligt og tørt sted.

8. Fejlfinding

9. Specifikationer

10. Support og garanti

For technical support or warranty inquiries, please refer to the contact information provided with your purchase or visit the official Pyle webwebsted. Gem din købsbevis til garantikrav.