NGTeco ML300 Smart Biometric Fingerprint Door Lock User Manual

Indledning

This manual provides comprehensive instructions for the installation, operation, and maintenance of your NGTeco ML300 Smart Biometric Fingerprint Door Lock. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

Produkt overview

The NGTeco ML300 is a smart door lock offering multiple access methods for enhanced security and convenience. It features biometric fingerprint recognition, a keypad for passcodes, Bluetooth connectivity for app control, and traditional physical keys.

Billede 1: NGTeco ML300 Smart Door Lock with its accompanying smartphone application interface. The lock features a circular keypad with a central fingerprint sensor, and a handle. The phone screen displays a "Press to unlock" button.

Nøglefunktioner:

• Multiple Unlock Options: Fingerprint, Passcode, NGTeco Home App (Bluetooth/Wi-Fi with gateway), Physical Key.
• High Sensitivity Fingerprint ID: 360° fingerprint recognition for quick unlocking.
• Random Passcode Feature: Enhances security by allowing random digits before and after the actual code.
• Reversible Handle Design: Compatible with both right-handed and left-handed doors.
• Emergency Backup Power: Micro-USB port for temporary power supply.
• Smart Home Integration: Works with Alexa and Google Assistant (requires Wi-Fi gateway, sold separately).

Billede 2: This image illustrates the four primary methods to unlock the NGTeco ML300 Smart Door Lock: fingerprint recognition, control via the NGTeco Home App, entering a passcode on the keypad, and using a traditional physical key.

Specifikationer

Billede 3: This diagram provides essential door preparation dimensions for installing the NGTeco ML300 lock, including face hole diameter, latch hole diameter, door swing compatibility, door thickness, backset, and screw length requirements.

Billede 4: A side-profile view of the NGTeco ML300 Smart Door Lock, illustrating its physical dimensions in both inches and millimeters, crucial for verifying compatibility with your door.

Installationsvejledning

Vigtig: It is strongly recommended to install this lock while the door is open or ajar. Do not close your door until the batteries are inserted and the lock is fully tested.

Nødvendige værktøjer:

• Phillips hovedskruetrækker
• 4 AA alkaliske batterier (medfølger ikke)

Trin-for-trin installation:

1. Forbered døren: Ensure your door meets the specifications outlined in the "Specifications" section.
2. Installer låsebolten:

   Video 1: This video demonstrates the installation steps for the NGTeco ML300 Smart Door Lock, including preparing the door and installing the latch bolt. Ensure the adjustable bolt's square hole remains horizontal.

   • Adjust the latch bolt length to 2-3/8" (60mm) or 2-3/4" (70mm) backset as needed.
   • Ensure the spindle hole is at the center of the door bore hole.
   • Make sure the axle hole is at the end and flush with the ground, not in the middle and tilted.
   • Position the beveled edge of the lock tongue to face the direction in which the door swings shut.
   • Sæt låsebolten ind i dørkanten og fastgør den med skruer.
3. Install the Front Panel (Exterior Keypad):

   Video 2: This video provides an unboxing and initial overview of the DL30Z Wifi Smart Door Lock, which shares similar installation principles with the ML300. It shows the components and initial setup steps.
   • Adjust the door handle direction on the exterior keypad by rotating it to the left or right as required.
   • Insert the set screw into the corresponding place on the exterior keypad. Vigtig: Before inserting the lock shaft through the square hole, make sure the triangle on the lock shaft is facing up. Incorrect orientation will cause the lock to fail.
   • Run the cable above the deadbolt.
   • Insert and tighten the screw to secure the front handle. Ensure the screw is tightened firmly and in place.
4. Monter monteringspladen:
   • Align the mounting bracket with the threaded screw receptacles of the exterior keypad.
   • Insert and tighten the screws to secure the mounting bracket.
5. Install the Rear Panel (Interior Assembly):
   • Plug the exterior keypad cable into the socket on the interior assembly. Ensure any excess cable is pushed into the socket to avoid clamping and possibly affecting the use of the lock.
   • Adjust the door handle direction on the interior assembly by rotating it to the left or right.
   • Insert and tighten the screw to secure the back handle. Make sure the screw is tightened firmly and in place. Otherwise, the handle might be non-rotating.
6. Insert Batteries and Test:
   • The lock will provide a low battery warning when power is critical.
   • To replace batteries, remove the battery cover on the interior assembly.
   • Replace all four AA alkaline batteries with new ones. Ensure correct polarity.
   • Sæt batteridækslet på igen.

Betjeningsvejledning

1. Fingerprint Unlock:

Billede 5: This image highlights the high sensitivity of the 360° fingerprint ID sensor on the NGTeco ML300, capable of unlocking in 0.2 seconds. It also illustrates the visual indicators for standby (blue), successfully unlocked (green), and unlock failed (red).

• Placer din registrerede finger på fingeraftrykssensoren.
• The lock will unlock if the fingerprint is recognized.

2. Passcode Unlock:

Billede 6: This image demonstrates the random passcode feature of the NGTeco ML300, where users can enter random digits before or after their correct password to enhance security against prying eyes.

• Tryk på tastaturet for at aktivere det.
• Enter your registered passcode (or random digits + passcode + random digits for enhanced security).
• Tryk på '#'-tasten for at bekræfte.

3. Physical Key Unlock:

• Insert the physical key into the keyhole located on the handle.
• Drej nøglen for at låse døren op.

NGTeco Home App Integration

The NGTeco Home App allows you to control your ML300 lock via Bluetooth. For remote Wi-Fi access and smart home integration (Alexa/Google Assistant), a Wi-Fi gateway (SLG200, sold separately) is required.

1. Download and Setup the App:

• Download the "NGTeco Home" app from your smartphone's app store (Google Play Store or Apple App Store).
• Tilmeld dig en konto og log ind.

2. Add Wi-Fi Gateway (SLG200 - Sold Separately):

Billede 7: This image displays the NGTeco Wi-Fi Gateway, which enables remote access, smart notifications, and voice commands for the smart lock. It highlights compatibility with Amazon Alexa and Google Assistant, noting that the gateway is sold separately.

• Plug in the SLG200 Wi-Fi gateway to a power source.
• Open the NGTeco Home app, tap '+' to add a device, and select 'Zigbee Gateway'.
• Follow the in-app instructions to reset the gateway and connect it to your 2.4GHz Wi-Fi network.

3. Add ML300 Smart Lock to the App:

• Within the gateway's interface in the app, tap 'Add Subdevice'.
• Follow the app's instructions to put the ML300 lock into pairing mode (usually by entering the menu on the lock's keypad and selecting the network setting option).
• Once detected, add the lock to your app.

4. Appens funktioner:

• Fjernoplåsning: Unlock your door from anywhere using the app (requires Wi-Fi gateway).
• Midlertidige adgangskoder: Generer tidsbegrænsede adgangskoder til gæster eller tjenesteudbydere.
• Adgang til poster: View en log over, hvem der kom ind og hvornår.
• Brugeradministration: Add, modify, or delete user fingerprints and passcodes.
• Smart Alerts: Receive notifications for low battery, unauthorized attempts, etc.

Opretholdelse

1. Batteriudskiftning:

• The lock will provide a low battery warning when power is critical.
• To replace batteries, remove the battery cover on the interior assembly.
• Replace all four AA alkaline batteries with new ones. Ensure correct polarity.
• Sæt batteridækslet på igen.

2. Emergency Power:

• If batteries completely drain, you can use a Micro-USB power bank to temporarily power the lock via the Micro-USB port located at the bottom of the exterior handle.
• This allows you to unlock the door using a registered method (fingerprint, passcode, or app) and then replace the batteries.

Billede 8: This image shows the NGTeco ML300 Smart Door Lock being powered by an external power bank connected via its Micro-USB port, providing emergency backup power in case the internal batteries are depleted.

3. Rengøring:

• Clean the lock's surface and fingerprint sensor with a soft, dry cloth.
• Undgå at bruge slibende rengøringsmidler eller opløsningsmidler, der kan beskadige overfladen eller de elektroniske komponenter.

Fejlfinding

Garanti og support

For warranty information, technical support, or any inquiries regarding your NGTeco ML300 Smart Biometric Fingerprint Door Lock, please contact NGTeco customer service.

Billede 9: NGTeco Call Center Service details, including phone number: +1(770)800-2321, E-mail: ngtime@ngteco.com, and operating hours: Mon-Fri 6:00am-6:00pm (EST).

• Telefon: +1(770)800-2321
• E-mail: ngtime@ngteco.com
• Driftstider: Mandag - fredag, 6:00 - 6:00 (EST)