PWAY PW-HT225HK HDMI KVM USB-forlænger Brugermanual

1. Introduktion

The PWAY PW-HT225HK is an HDMI KVM USB Extender designed to transmit high-definition video and USB signals over long distances using a single Cat5e/6/7 network cable. This device allows for the extension of HDMI video up to 1080P resolution and KVM (Keyboard, Video, Mouse) control up to 50 meters (165 feet). It features a local HDMI loop-out on the transmitter unit and supports Power Over Cable (POC) functionality, simplifying installation by requiring power only at the receiver end.

Image 1.1: The PWAY PW-HT225HK HDMI KVM USB Extender, showing both the transmitter and receiver units.

2. Nøglefunktioner

• Udvidet transmission: Transmits audio and video signals up to 50 meters (165 feet) over a single Cat6/7 cable. Supports Cat5e up to 40m and Cat5 up to 30m.
• High-Definition Opløsning: Supports resolutions up to 1920x1080@60Hz, compatible with 1080i/720P/720i/480P/480i.
• KVM funktionalitet: Enables remote control of a signal source using a keyboard and mouse with minimal delay.
• Local Loop Out: The transmitter unit includes an HDMI output for local display monitoring.
• Strømkabel (POC): Only the receiver unit requires a power connection, simplifying power management.
• Plug and Play: No driver installation required, compatible with Windows, Mac OS, and Linux operating systems.
• EDID Function: Supports EDID management for optimal display compatibility.

Image 2.1: Visual representation of key features including 50m transmission, KVM control, no delay, and POC function.

3. Pakkens indhold

Kontroller venligst, at alle nedenstående varer er inkluderet i din pakke:

• 1 x PW-HT225HK Transmitter (TX) unit
• 1 x PW-HT225HK Receiver (RX) unit
• 1 x 12V strømadapter
• 1 x USB-kabel
• 1 x brugsanvisning

Image 3.1: Contents of the PWAY PW-HT225HK package, including the transmitter, receiver, power adapter, USB cable, and manual.

4. Specifikationer

5. Opsætningsvejledning

Follow these steps to set up your HDMI KVM USB Extender:

1. Tilslut senderenheden (TX):
   • Connect your source device (e.g., PC, NVR) to the HDMI IN/PWR porten på TX-enheden ved hjælp af et HDMI-kabel.
   • Connect the USB-B port on the TX unit to a USB port on your source device using the provided USB cable. This enables KVM functionality.
   • Valgfri: If you require local monitoring, connect a display to the HDMI OUT/STA porten på TX-enheden ved hjælp af et HDMI-kabel.
2. Tilslut modtagerenheden (RX):
   • Connect your remote display to the HDMI OUT porten på RX-enheden ved hjælp af et HDMI-kabel.
   • Connect your keyboard and mouse to the K/M (USB) ports on the RX unit.
3. Tilslut netværkskablet:
   • Connect a single Cat5e/6/7 network cable between the UTP (RJ45) port on the TX unit and the UTP (RJ45) port on the RX unit. Ensure the cable is of good quality and appropriate length for your desired transmission distance.
4. Anvend strøm:
   • Tilslut 12V strømadapteren til DC 12V port på Modtager (RX) unit. Due to POC functionality, the transmitter unit will receive power through the network cable.
5. Tænd: Power on your source device and displays. The extender should automatically establish the connection.

Image 5.1: Basic connection diagram illustrating how to connect the PC, monitor, and KVM extender units.

Billede 5.2: Detaljeret view of the ports on both the Transmitter (TX) and Receiver (RX) units, including HDMI, USB, RJ45, and power connections.

Image 5.3: Diagram illustrating the Power Over Cable (POC) function, where power is supplied only to the receiver unit.

6. Betjeningsvejledning

Once the setup is complete, the PWAY PW-HT225HK extender operates automatically.

• KVM Control: The keyboard and mouse connected to the receiver unit will control the source device connected to the transmitter unit. This allows for remote operation of your computer or NVR.
• Local Output: If a display is connected to the HDMI OUT/STA port on the transmitter, it will mirror the video signal being sent to the remote display, providing convenient local monitoring.
• EDID Management: The extender supports EDID (Extended Display Identification Data) to ensure compatibility between the source and display devices. In most cases, this is handled automatically.
• Operativsystemkompatibilitet: The device is plug-and-play and supports various operating systems including Windows, Mac OS, and Linux without requiring additional drivers.

Billede 6.1: En eksample setup demonstrating KVM control, where a keyboard and mouse connected to the receiver unit control a remote computer.

Image 6.2: Diagram illustrating the local loop-out feature, allowing a monitor to be connected directly to the transmitter unit.

Image 6.3: The extender supports various operating systems including Windows, Mac OS, and Linux, indicating broad compatibility.

7. Fejlfinding

• Intet videosignal:
  • Ensure all HDMI and network cables are securely connected.
  • Verify that the receiver unit is powered on and the power adapter is functioning.
  • Check the length and quality of the Cat5e/6/7 cable. Exceeding recommended distances or using low-quality cables can cause signal loss.
  • Test with a shorter network cable if possible.
  • Ensure the source device is outputting a compatible resolution (up to 1080P@60Hz).
• KVM (Keyboard/Mouse) Not Working:
  • Confirm the USB cable is connected from the source device to the transmitter unit.
  • Ensure the keyboard and mouse are properly connected to the USB ports on the receiver unit.
  • Try connecting the keyboard and mouse directly to the source device to verify their functionality.
• Intermittent Signal or Poor Image Quality:
  • This can often be caused by a poor quality or excessively long network cable. Replace with a certified Cat6/7 cable if issues persist.
  • Ensure there are no strong electromagnetic interference sources near the network cable.
  • Check if the resolution setting on the source device is stable and compatible.
• Power Indicator (PWR) Not Lit:
  • Verify the 12V power adapter is correctly plugged into the receiver unit and a working power outlet.
  • Check the network cable connection between TX and RX units, as the TX unit receives power via POC.

8. Garanti og support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact PWAY customer service through their official channels. Keep your proof of purchase for any warranty claims.