1. Introduktion
This manual provides essential information for the safe installation, operation, and maintenance of your ZMH LED Ceiling Light. Please read these instructions carefully before installation and retain them for future reference.
2. Sikkerhedsinstruktioner
- Sørg for, at strømforsyningen er afbrudt før installation eller vedligeholdelse.
- Installationen bør udføres af en kvalificeret elektriker, hvis du er i tvivl.
- Modificer ikke produktet på nogen måde.
- Dette produkt er kun beregnet til indendørs brug (IP20-klassificering).
- Holdes væk fra vand og høj luftfugtighed.
3. Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- ZMH LED Ceiling Light fixture
- Fjernbetjening
- Monteringsudstyr (skruer, ankre)
- Instruktionsmanual (dette dokument)
Note: The included terminal block may be small. It is recommended to use a suitable terminal block for secure wiring if necessary.
4. Installationsvejledning
- Forberedelse: Disconnect power at the main circuit breaker. Ensure the mounting surface is clean and stable.
- Montering af monteringsbeslag:
Attach the mounting bracket to the ceiling using the provided screws and anchors. Ensure it is securely fastened.
Billede: Nærbillede view of the light fixture's mounting bracket, showing the attachment points for ceiling installation.
- Ledningsføring:
Connect the household electrical wires to the light fixture's terminal block. Ensure correct polarity (Live, Neutral, Earth). Double-check all connections for security.
Kontakt en kvalificeret elektriker, hvis du ikke er bekendt med elektriske ledninger.
- Fastgørelsesanordning:
Carefully attach the LED ceiling light fixture to the installed mounting bracket. Secure it in place according to the design (e.g., sliding and locking mechanisms, or screws).
Image: Dimensional diagram of the ZMH LED Ceiling Light, illustrating its 60cm length and mounting structure.
- Strømgendannelse: Once the installation is complete and secure, restore power at the main circuit breaker.
5. Betjeningsvejledning
The ZMH LED Ceiling Light is operated using the included remote control.
5.1 Fjernbetjeningsfunktioner
- Tænd/sluk: Tryk på tænd/sluk-knappen for at tænde eller slukke lyset.
- Justering af lysstyrke: Use the brightness buttons (usually '+' and '-') to increase or decrease the light intensity continuously.
- Farvetemperaturjustering: Use the color temperature buttons (often represented by sun/moon icons or 'C'/'W') to adjust the light from warm white (3000K) to neutral white (4500K) to cool white (6000K).
- Hukommelsesfunktion: The light features an integrated memory function that saves the last brightness and color temperature setting for future use.
Image: The ZMH LED Ceiling Light demonstrating its ability to switch between cold, neutral, and warm light settings, with the remote control visible.
Billede: Detaljeret view of the ZMH LED Ceiling Light, highlighting the difference between warm white and cool white illumination.
6. Vedligeholdelse
- Rensning: Afbryd strømmen før rengøring. Tør armaturet af med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- lysdioder: The LEDs are permanently installed and do not require replacement.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | Ingen strømforsyning; løse ledninger; fjernbetjeningens batteri er afladet. | Check circuit breaker; verify wiring connections; replace remote control battery. |
| Fjernbetjeningen reagerer ikke. | Remote control battery depleted; remote not paired (if applicable); obstruction. | Replace remote control battery; ensure direct line of sight to the light. |
| Memory function not working consistently. | Light turned off too quickly after adjustment. | Allow the light to remain on for a few seconds after adjusting settings before turning it off to ensure the memory function saves the state. |
| Uregelmæssig lysudbytte eller flimmer. | Loose wiring; incompatible dimmer switch (if not using remote). | Check wiring connections; ensure only the provided remote control is used for dimming. |
Note: Due to potential remote control upgrades, both old and new versions may be in circulation. If you experience issues or have questions, please contact customer service.
8. Specifikationer
| Mærke | ZMH |
| Model | LED Panel Light 60cm (B08HS3H81W) |
| Dimensioner (L x B x H) | Ca. 60 cm x 15 cm x 4.5 cm |
| Vægt | 2.18 kg |
| Materiale | Metal and Acrylic |
| Strømforbrug | 23 watt |
| Voltage | 230 volt (vekselstrøm) |
| Lysstrøm | 3280 Lumen |
| Farvetemperatur | 3000K (varm hvid) til 6000K (kold hvid) |
| Color Rendering Index (CRI) | >80 |
| Levetid | Ca. 30,000 timer |
| IP-vurdering | IP20 (kun indendørs brug) |
| Særlige funktioner | Dimmable, Remote Control, Memory Function |
8.1 Energieffektivitet
Image: EU Energy Label for the ZMH LED Ceiling Light, indicating its energy efficiency class.
For detaljerede energioplysninger henvises til EPREL-databasen: https://eprel.ec.europa.eu/qr/1114582
9. Garanti og support
For any questions, issues, or warranty claims regarding your ZMH LED Ceiling Light, please contact our customer service. Refer to your purchase documentation for specific warranty terms and contact details.
We are committed to providing support and solutions for your product.
