Insta360 Suction Cup Mount Instruction Manual

1. Produktet er slutview

The Insta360 Suction Cup Mount is designed for securely attaching your Insta360 camera to smooth, flat surfaces, such as car windows or body panels. Its robust design and adjustable double ball mount allow for versatile camera positioning to capture a wide range of perspectives.

• Designed for Versatility: Ideal for mounting your Insta360 camera inside or on your vehicle.
• Adjustable Double Ball Mount: Provides maximum adjustability for achieving various camera angles.
• Stærk sugekop: Ensures a firm and reliable attachment to smooth, flat surfaces.
• Holdbar konstruktion: Made from tough, high-strength aluminum alloy.
• Kompakt og bærbar: Small, foldable design for easy storage and transport.

Figur 1: Forside view of the Insta360 Suction Cup Mount. This image displays the mount's main components, including the suction cup base, the double ball arm, and the camera attachment point.

2. Opsætningsvejledning

1. Forbered monteringsoverfladen: Ensure the surface where the suction cup will be attached is clean, dry, and smooth. Wipe away any dust, dirt, or moisture.
2. Fastgør kameraet: Secure your Insta360 camera to the mount's attachment point. Ensure it is firmly tightened.
3. Position the Suction Cup: Press the suction cup firmly against the prepared surface. Flip the lever on the suction cup base to create a vacuum seal, securing the mount in place.
4. Verify Suction: Gently tug on the mount to ensure it is securely attached before mounting your camera.

Figur 2: Øverst view of the suction cup base. This image highlights the lever mechanism used to activate the vacuum seal for secure attachment.

3. Betjeningsvejledning

1. Justering af vinklen: Loosen the central knob on the double ball mount to adjust the camera's angle. The double ball design allows for extensive flexibility in positioning.
2. Securing the Angle: Once the desired angle is achieved, tighten the central knob firmly to lock the mount in position.
3. Anbefalet brug: For optimal performance and safety, ensure the mount is used on clean, non-porous, and flat surfaces. Avoid mounting on textured or curved surfaces.

Figur 3: Side view of the mount, illustrating the double ball joint for angle adjustments. The central knob is used to loosen and tighten the joints.

Figure 4: An Insta360 camera securely mounted on a car hood using the suction cup mount, demonstrating a typical outdoor application.

4. Vedligeholdelse

• Rengør sugekoppen: Regularly clean the rubber suction cup with mild soap and water to remove any residue that could impair its grip. Allow it to air dry completely.
• Undersøg for skader: Periodically check the suction cup and the mount's components for any signs of wear, cracks, or damage. Replace if necessary.
• Opbevaring: Store the mount in a clean, dry place away from direct sunlight and extreme temperatures to preserve the integrity of the rubber suction cup.

5. Fejlfinding

• Dårlig sugeevne: If the mount does not adhere properly, ensure the mounting surface is perfectly clean, dry, and smooth. Avoid porous or textured surfaces. Extreme temperatures can also affect suction; try to mount in moderate conditions.
• Fæstet føles løst: Re-tighten all adjustment knobs on the double ball mount. Ensure the suction cup lever is fully engaged.

6. Specifikationer

7. Garanti og support

For garantioplysninger og teknisk support henvises til den officielle Insta360 webwebstedet eller kontakt deres kundeservice direkte. Gem din købsbevis til eventuelle garantikrav.

Visit the official Insta360 Store: Insta360 Store