Verona Enterprise HTC-1 digitalt termometer og hygrometer brugermanual

1. Introduktion

Thank you for choosing the Verona Enterprise HTC-1 Digital Thermometer and Hygrometer. This device is designed to provide accurate readings of indoor temperature and humidity, along with time and date display. It is suitable for various environments, including homes, offices, and incubators. Please read this manual carefully to ensure proper use and optimal performance of your device.

2. Sikkerhedsoplysninger

• Udsæt ikke enheden for ekstreme temperaturer, direkte sollys eller høj luftfugtighed.
• Undgå at tabe enheden eller udsætte den for kraftige stød.
• Hold enheden væk fra vand og andre væsker.
• Forsøg ikke at skille enheden ad eller ændre den. Dette vil ugyldiggøre garantien.
• Bortskaf brugte batterier ansvarligt i henhold til lokale regler.

3. Pakkens indhold

• Verona Enterprise HTC-1 Digital Thermometer and Hygrometer (Model: HTC-CLOCK)

4. Produktet er slutview

The HTC-1 features a large LCD display for easy readability and intuitive buttons for setting and viewing data.

4.1 Foran View

Billede 1: Front view of the Verona Enterprise HTC-1, displaying temperature, humidity, and time on its large LCD screen. The control buttons (MODE, ADJ, MEMORY) are located at the bottom right.

4.2 bag View og funktioner

Billede 2: Bag view of the Verona Enterprise HTC-1, showing the open battery compartment. This compartment houses the AAA battery required for operation.

Billede 3: Side og bag view of the Verona Enterprise HTC-1, illustrating the fold-out stand for desktop placement and the hanging hole for wall mounting. A wired probe is also visible, indicating an external sensor option.

Knapper:

• KØRSELSVEJLEDNING: Switches between time/date display, enters setting mode.
• ADJ: Adjusts values in setting mode, switches between 12/24 hour format.
• HUKOMMELSE: Displays maximum and minimum temperature/humidity readings.

Rear Switches:

• °C/°F kontakt: Skifter mellem temperaturenheder i Celsius og Fahrenheit.

5. Opsætning

5.1 Batteriinstallation

1. Locate the battery compartment cover on the back of the device (refer to Image 2).
2. Skub dækslet nedad for at åbne rummet.
3. Isæt et AAA-batteri, og sørg for at polariteten (+/-) vender korrekt som angivet i batterirummet.
4. Sæt batteridækslet på igen ved at skubbe det opad, indtil det klikker på plads.

5.2 Indledende tænding

Upon battery installation, the device will power on automatically and display current temperature, humidity, and time. The default time and date may need to be set.

5.3 Placering

The HTC-1 can be placed on a flat surface using its fold-out stand or mounted on a wall using the hanging hole (refer to Image 3).

• For accurate readings, place the device away from direct heat sources (e.g., radiators, direct sunlight) or cold drafts (e.g., windows, air conditioners).
• Ensure good air circulation around the device.
• If using the external probe (if included), position the probe in the area where you wish to measure temperature, such as outdoors or inside an incubator.

6. Betjeningsvejledning

6.1 Grundlæggende visning

The large LCD screen simultaneously displays:

• Temperatur: In Celsius (°C) or Fahrenheit (°F).
• Fugtighed: Som en procentdeltage (%).
• Tid: In 12-hour (AM/PM) or 24-hour format.

6.2 Indstilling af tid og dato

1. Tryk og hold på MODE button for approximately 3 seconds until the hour digit starts flashing.
2. Tryk på ADJ knappen for at justere timen.
3. Trykke MODE again to move to the minute setting. Press ADJ for at justere minutter.
4. Fortsæt med at trykke MODE to cycle through year, month, and day settings, adjusting each with the ADJ knap.
5. After setting the day, press MODE en sidste gang for at afslutte indstillingstilstand.

6.3 Skift af temperaturenheder (°C/°F)

Find ° C / ° F switch on the back of the device. Slide the switch to your desired temperature unit.

6.4 MAX/MIN Temperature and Humidity Readings

The device records the maximum and minimum temperature and humidity values since the last reset.

1. Tryk på HUKOMMELSE button once to display the maximum (MAX) temperature and humidity readings.
2. Trykke HUKOMMELSE again to display the minimum (MIN) temperature and humidity readings.
3. Trykke HUKOMMELSE a third time to return to the current readings display.
4. To clear the MAX/MIN records, press and hold the HUKOMMELSE button for approximately 3 seconds while MAX or MIN values are displayed.

6.5 12/24 Hour Display

I normal tidsvisningstilstand skal du trykke på ADJ -knappen for at skifte mellem 12-timers (med AM/PM-indikator) og 24-timers formater.

6.6 Integral-Hour Alarm Function

The device features an integral-hour alarm, which sounds a short beep at the top of every hour. To activate or deactivate this function:

• I normal tidsvisningstilstand skal du trykke på MODE button once to display the date.
• While the date is displayed, press the ADJ button. An alarm icon (often a bell) will appear or disappear, indicating the status of the integral-hour alarm.

7. Vedligeholdelse

7.1 Rengøring

Wipe the device clean with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water.

7.2 Udskiftning af batteri

When the display becomes dim or erratic, it is time to replace the battery. Follow the steps in Section 5.1 for battery installation.

7.3 Opbevaring

If the device will not be used for an extended period, remove the battery to prevent leakage and damage.

8. Fejlfinding

• Ingen visning: Check battery polarity. Replace with a fresh AAA battery.
• Upræcise læsninger: Ensure the device is placed in a stable environment, away from direct heat/cold sources or strong drafts. Allow time for the device to stabilize in a new environment.
• Knapper reagerer ikke: Fjern og sæt batteriet i igen for at udføre en soft nulstilling.

9. Specifikationer

10. Garanti og support

For warranty information or technical support, please refer to the retailer or contact Verona Enterprise directly through their official channels. Keep your purchase receipt as proof of purchase.