1. Introduktion
This manual provides comprehensive instructions for the installation, operation, and maintenance of your CGOLDENWALL 10.5KW Commercial Self-Draining Steam Generator. Please read this manual thoroughly before installation and use to ensure safe and efficient operation. Retain this manual for future reference.
Figure 1: CGOLDENWALL 10.5KW Steam Generator with included components.
2. Sikkerhedsoplysninger
Vigtige sikkerhedsinstruktioner:
- Always ensure the power supply is disconnected before performing any installation, maintenance, or repair work.
- Installation must be performed by a qualified electrician and plumber in accordance with all local and national codes.
- Brug ikke dampgeneratoren, hvis den er beskadiget eller ikke fungerer korrekt.
- Hold børn og kæledyr væk fra dampgeneratoren og dampudløbet under drift.
- The steam outlet produces hot steam. Avoid direct contact to prevent burns.
- Ensure adequate ventilation in the steam room.
- The control panel must be installed outside the steam room.
3. Pakkens indhold
Bekræft at alle komponenter er til stede i pakken:
- Steam generator unit
- Dampdyse
- 10 m control cable
- 3 m temperature sensor
- Waterproof LED digital controller
- Drænventil
- Sikkerhedsventil
Figure 2: Included accessories for the steam generator.
4. Specifikationer
| Specifikation | Værdi |
|---|---|
| Fabrikant | CGOLDENWALL |
| Varenummer | CNA-1015 |
| Varens vægt | 39.6 pund |
| Produktdimensioner | 19.7 x 8.7 x 15.4 tommer |
| Varemodelnummer | AT |
| Size / Power | 10.5KW |
| Materiale | Rustfrit stål |
| Strømkilde | AC |
| Voltage | 220 volt |
| Wattage | 10.5 KW |
| Breaker Required | 60A (for 10.5KW) |
| Passende rumvolumen | 10.5 m³ / 371 Cubic feet (for 10.5KW) |
Figure 3: Detailed product parameters for various models.
5. Opsætning og installation
The steam generator should be installed in a dry, well-ventilated area near the shower, such as a vanity or closet. Ensure easy access for maintenance.
5.1 Vandtilslutninger
Connect the water inlet and steam outlet pipes. The drain valve should be installed according to the arrow indicating the correct direction. Always use two wrenches to avoid damaging the valve during installation.
Figure 4: Steam generator connection points.
5.2 Elektriske ledninger
For 110V countries (e.g., USA, Canada, Mexico), connect the wires to 2 hot lines (L1 and L2). No neutral line is needed. For 220V countries, connect the wires to the hot (L) and neutral (N) lines. Ensure the voltage difference between L1(L) and L2(N) is 200-240V. Use 6AWG wire with a 60-amp HFI-afbryder til 10.5KW-modellen.
Figure 5: Electrical wiring diagram.
5.3 Temperaturfølerinstallation
One end of the temperature probe line connects to the control panel. The other end, with the sensor, should be placed in the steam room. The probe must be installed on a vertical surface, 4-5 feet above the floor, and exposed to the air. The steam nozzle should be approximately 30mm above the ground or 20mm from the edge of the bathtub. For comfort, install the nozzle away from the seating area.
Figure 6: Temperature sensor and steam nozzle installation.
5.4 Installationsvideoguide
For en visuel vejledning i installationsprocessen, se venligst videoen nedenfor:
Video 1: CGOLDENWALL Steam Shower Generator Installation. This video demonstrates the step-by-step process of installing the steam generator, including water and electrical connections.
6. Betjening
The intelligent touch controller allows for easy adjustment of temperature and working time. The steam generator quickly produces a consistent flow of steam, typically starting in 3-5 minutes, with automatic segment heating.
6.1 Using the Intelligent Touch Controller
The controller features a time/temperature display, light key, turn on/off button, and time/temperature setting buttons.
- Temperaturindstilling: The adjustable temperature range is 95°F - 131°F (35°C - 55°C). Use the up/down arrows to set your desired temperature.
- Tidsindstilling: The automatic shut-off time can be set from 30 minutes to 12 hours. Use the up/down arrows to adjust the duration.
- Tænd/sluk: Press the power button to start or stop the steam generator.
Figure 7: Intelligent Touch Controller interface and functions.
7. Vedligeholdelse
Regular maintenance ensures the longevity and optimal performance of your steam generator.
7.1 Automatic Drainage and Cleaning
The unit features an auto drainage function, eliminating the need for manual drainage. A quick cleaning port allows for easy removal of scale without disassembling pipes. The system automatically drains water and limescale 15 minutes after each use.
Figure 8: Automatic drainage and cleaning port details.
7.2 Heating Tube Replacement
In case of a heating tube malfunction, it can be replaced. Refer to the following video for detailed instructions:
Video 2: CGOLDENWALL Steam Generator - Replacement of the Heating Tube. This video demonstrates the procedure for safely removing and replacing the heating tube within the steam generator unit.
8. Fejlfinding
If you encounter issues with your steam generator, please review følgende almindelige problemer og løsninger:
- Ingen dampproduktion: Check power supply, water inlet connection, and ensure the controller is set correctly. Verify that the heating elements are functioning.
- Utilstrækkelig damp: Ensure the steam room is properly sealed. Check for any blockages in the steam outlet. Verify the water level in the generator.
- Error Codes on Controller: Refer to the specific error code in your product's detailed manual (if provided separately) or contact customer support for assistance.
- Vandlækage: Inspect all pipe connections for tightness. Check the drain valve for proper installation and function.
For persistent issues or problems not listed here, please contact CGOLDENWALL customer support.
9. Garanti og support
The CGOLDENWALL 10.5KW Commercial Self-Draining Steam Generator comes with a 1 års producentgaranti.
For warranty claims, technical support, or any questions regarding your product, please contact CGOLDENWALL customer service through their official channels. Ensure you have your product model number (AT-10.5KW) and purchase details available when contacting support.
