1. Introduktion
The DINGXUEMEI Danmini YB-43HD-MT is an intelligent digital peephole doorbell viewer designed to enhance home security. It features a 4.3-inch HD screen, a 3.0MP security camera, night vision, PIR motion detection, and voice intercom capabilities. This device can be installed without modifying existing door structures, offering a convenient and effective security solution.
2. Sikkerhedsoplysninger
- Udsæt ikke enheden for ekstreme temperaturer, fugt eller direkte sollys.
- Undgå at tabe eller udsætte enheden for kraftige stød.
- Forsøg ikke selv at skille enheden ad eller reparere den. Kontakt kvalificeret servicepersonale.
- Hold enheden væk fra vand og andre væsker.
- Brug kun den specificerede strømkilde og tilbehør.
3. Pakkens indhold
Tjek venligst pakken for følgende varer:
- Indoor Display Unit (4.3-inch screen)
- Udendørs kighulskameraenhed
- Monteringsbeslag
- Skruer og installationsværktøj
- USB opladningskabel
- Brugervejledning (dette dokument)
- TF Card (if included with your model)
4. Opsætning og installation
Follow these steps to install your digital peephole doorbell vieweh:
- Forbered døren: Ensure your door has a standard peephole. Remove any existing peephole viewer. The device is designed to fit standard peephole holes without additional drilling.
- Install Outdoor Unit: Insert the cable of the outdoor peephole camera unit through the peephole hole from the outside of the door. Ensure the camera is facing outwards and is securely seated.
- Fastgør monteringsbeslag: From the inside of the door, thread the camera cable through the central hole of the mounting bracket. Secure the bracket to the door using the provided screws.
- Connect Indoor Unit: Connect the cable from the outdoor unit to the corresponding port on the back of the indoor display unit.
- Monter indendørsenhed: Align the indoor display unit with the mounting bracket and slide it downwards until it locks into place.
- Indsæt TF-kort (valgfrit): If you wish to record photos or videos, insert a compatible TF card into the designated slot on the indoor unit.
- Tænd: Press and hold the power button on the indoor unit to turn it on.


5. Betjeningsvejledning
The Danmini YB-43HD-MT offers multiple operating modes and features for enhanced security.

5.1. Tænd/sluk
- Tænd: Press and hold the power button (usually on the side or bottom of the indoor unit) for a few seconds until the screen lights up.
- Sluk: Tryk og hold tænd/sluk-knappen nede igen, indtil skærmen slukker.
5.2. Main Operating Modes
The device features three primary modes:
- At Home Mode: When the doorbell button is pressed, the indoor unit rings, and the screen automatically activates, displaying the visitor. You can manually take a picture or record a video if desired.
- Leave Home Mode: When the doorbell button is pressed, the indoor unit rings, but the display remains off. The device automatically takes a picture or records a video of the visitor.
- Ingen forstyrrelsestilstand: When the doorbell button is pressed, the outdoor unit's light indicates 'no disturb', and the indoor unit will not ring or activate the screen. The device will automatically take a picture or record a video of the visitor.
5.3. Viewing Outdoor Conditions
Til view outside at any time, press the switch key on the indoor unit. The screen will display the live feed from the outdoor camera. Pressing the viewing key again while the screen is active will capture a picture or start recording a video, which will be saved to the TF card.
5.4. Voice Intercom
The device supports two-way voice intercom. When a visitor presses the doorbell, after the screen activates, you can use the touch keys on the indoor unit to initiate a voice conversation with the visitor.
5.5. Nattesyn
The outdoor camera is equipped with infrared night vision, allowing clear viewing of visitors even in low-light conditions or complete darkness.
5.6. PIR-bevægelsesdetektion
The integrated PIR motion detection feature automatically detects movement near your door. When motion is detected, the device can be configured to automatically take a picture or record a short video, even if the doorbell is not pressed. These recordings are saved to the TF card.
6. Vedligeholdelse
- Rensning: Use a soft, dry cloth to clean the screen and camera lens. Do not use abrasive cleaners or solvents.
- Batteri: Ensure the device is charged regularly. If the battery is removable, replace it with an authorized battery when necessary.
- Opbevaring: If storing the device for an extended period, ensure it is fully charged and stored in a cool, dry place.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tænder ikke. | Lavt batteri eller ingen strøm. | Charge the device using the provided USB cable. Ensure the power adapter is working. |
| Intet billede på skærmen. | Camera cable disconnected or damaged. | Check the connection between the outdoor camera and the indoor unit. Ensure the cable is securely plugged in. |
| Dårlig billedkvalitet. | Dirty camera lens or insufficient light. | Clean the camera lens with a soft cloth. Ensure night vision is active in low light. |
| No recording to TF card. | TF card not inserted, full, or faulty. | Insert a TF card, check if it's full and delete old files, or try a different TF card. Ensure recording settings are enabled. |
| Dørklokken ringer ikke. | In 'No Disturb' mode or volume is off. | Check the operating mode and adjust the volume settings. |
8. Specifikationer
- Model: YB-43HD-MT
- Skærmstørrelse: 4.3 tommer
- Kameraopløsning: 3.0 megapixel
- Viewvinkel: 160 grader
- Særlige funktioner: Night Vision, PIR Motion Detection, Voice Intercom, No Disturb Function, Video Recording
- Materiale: Metal (Outdoor Unit)
- Forbindelse: Wired (between units)
- Strømkilde: Corded Electric (internal battery, rechargeable via USB)
- Opbevaring: Supports TF Card (not specified max capacity)
- Dimensions (Parcel): 19 x 11 x 7 cm
- Weight (Parcel): 550 g
9. Garanti og support
This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer's customer service department.
Gem venligst din købsbevis af garantihensyn.





