1. Introduktion
This manual provides essential instructions for the installation, usage, and maintenance of your Timex Metropolitan+ 20mm Quick-Release Leather Watch Strap. Please read this guide thoroughly to ensure proper handling and longevity of your product.
2. Nøglefunktioner
- Two-piece genuine leather strap.
- Equipped with quick-release spring bars for easy installation and removal.
- Features a silver-tone buckle and hardware.
- Designed to fit watches with a 20mm lug width.
- Accommodates wrist circumferences ranging from 6 to 8 inches.
3. Installationsvejledning
The quick-release design of this strap allows for tool-free installation and removal.
3.1. Nødvendigt værktøj
- No special tools are required for installation or removal.
3.2. Trin-for-trin installation
- Klargør dit ur: Ensure your watch is clean and free of any old strap remnants.
- Find hurtigudløserstiften: On the underside of each strap piece, locate the small lever or knob on the quick-release spring bar.
- Indsæt den ene ende: Insert one end of the spring bar into the lug hole on one side of your watch case.
- Compress and Align: Gently pull the quick-release lever to compress the spring bar. Align the other end of the spring bar with the opposite lug hole.
- Release and Secure: Release the lever, allowing the spring bar to extend into the lug hole. Gently tug on the strap to ensure it is securely seated.
- Repeat for Second Piece: Repeat the process for the second strap piece.
4. Brug og justering
Once installed, wear the watch strap as you would any traditional watch band. Adjust the buckle to achieve a comfortable and secure fit on your wrist. Ensure the strap is not too tight to prevent discomfort or too loose to prevent the watch from moving excessively.
5. Pleje og vedligeholdelse
To prolong the life and appearance of your leather watch strap, follow these care guidelines:
- Undgå vandeksponering: Leather can be damaged by prolonged exposure to water. Remove your watch before swimming, showering, or engaging in water sports.
- Rengør forsigtigt: If the strap becomes dirty, wipe it with a soft, damp klud. Undgå skrappe kemikalier eller slibende rengøringsmidler.
- Allow to Dry Naturally: If the strap gets wet, allow it to air dry completely away from direct sunlight or heat sources.
- Condition Periodically: Use a leather conditioner specifically designed for watch straps to keep the leather supple and prevent cracking. Apply sparingly and buff with a clean cloth.
- Undgå ekstreme temperaturer: Do not expose the strap to extreme heat or cold, as this can cause the leather to dry out or crack.
6. Fejlfinding
| Spørgsmål | Mulig årsag | Løsning |
|---|---|---|
| Strap does not fit watch lugs. | Incorrect lug width. | Ensure your watch has a 20mm lug width. This strap is specifically designed for 20mm lugs. |
| Quick-release pin is stuck or difficult to operate. | Rester i mekanismen eller forkert justering. | Gently clean around the pin. Ensure the pin is not bent. Apply slight pressure while operating the lever. |
| Læderet ser tørt eller revnet ud. | Lack of conditioning or exposure to harsh conditions. | Apply a suitable leather conditioner. Avoid prolonged exposure to direct sunlight or extreme temperatures. |
7. Produktspecifikationer
- Modelnummer: TW7C06300GZ
- Materiale: Ægte læder
- Knækbredde: 20 mm
- Hardware: Silver-tone buckle and quick-release spring bars
- Håndledstilpasning: 6 to 8 inches circumference
- Farve: Tan Perf/Silver-Tone
- Fabrikant: Timex Corporation
8. Garanti og support
For garantioplysninger og kundesupport henvises til den officielle Timex webwebstedet eller kontakt deres kundeserviceafdeling. Gem din købsbevis til eventuelle garantikrav.
Besøg den officielle Timex-butik: Timex-butik på Amazon
