SISIGAD A12 Mixed Color Hoverboard User Manual

1. Introduktion

This manual provides essential information for the safe and effective operation of your SISIGAD A12 Mixed Color Hoverboard. Please read it thoroughly before first use and retain it for future reference. The SISIGAD A12 Hoverboard is designed for users aged 5 and up, with a maximum weight capacity of 176 lbs. It complies with UL2272 safety standards, ensuring electrical safety.

Image 1: Top and angled view of the SISIGAD A12 Mixed Color Hoverboard.

2. Produktfunktioner

• Self-Balancing Technology: Equipped with an induction system for easy learning and stable rides.
• Holdbare dæk: Features 6.5-inch non-slip sturdy rubber tires for various terrains.
• Farverige LED-lys: Includes flashing wheel lights, dual LED headlights, and sensitive turn signal lights for enhanced visibility and aesthetics.
• Bluetooth-højttaler: Integrated stereo surround sound speaker allows for music playback during rides.
• Præstation: Capable of speeds up to 7.5 mph and a range of approximately 8 miles on a full charge.

Image 2: The hoverboard with its self-balancing induction system indicated.

Image 3: Detailed diagram illustrating the hoverboard's components and dimensions.

Image 4: The hoverboard highlighting its integrated music speaker feature.

3. Opsætning

3.1 Opladning af hoverboardet

Before initial use, fully charge your hoverboard. The charging port is located on the underside of the device, near the power button. Connect the provided charger to the port and plug it into a standard electrical outlet. A full charge typically takes 2-3 hours. Do not overcharge the device.

3.2 Tænd/sluk

To power on the hoverboard, place it on a flat, level surface. Locate the power button on the underside of the device and press it. The hoverboard will self-balance and emit a sound indicating it is ready for use. To power off, press the power button again. If the hoverboard is not on a flat surface when powered on, it may beep to indicate an unstable state.

4. Betjeningsvejledning

4.1 Stepping On and Off

1. Place one foot firmly on a footpad, ensuring the hoverboard is level.
2. Quickly and confidently step onto the other footpad with your second foot.
3. For at stige af, træd af én fod ad gangen, helst baglæns.

4.2 Balancing and Movement

The hoverboard is controlled by shifting your body weight. Lean slightly forward to move forward, and lean backward to slow down or move in reverse. To turn, apply gentle pressure with your left foot to turn right, and with your right foot to turn left.

5. Sikkerhedsretningslinjer

• Bær altid passende sikkerhedsudstyr, inklusive hjelm, knæbeskyttere og albuebeskyttere.
• Ensure the hoverboard is fully charged before use to avoid unexpected power loss.
• Overskrid ikke den maksimale vægtgrænse på 176 lbs.
• Recommended for users aged 5 and older.
• Undgå at køre på våde, ujævne eller glatte overflader.
• Do not ride in traffic or on public roads.
• Always maintain control and ride at a safe speed.
• The hoverboard meets UL2272 safety standards for electrical systems.

6. Vedligeholdelse

6.1 Rengøring

Tør hoverboardet af med reklameramp cloth to remove dirt and debris. Do not use harsh chemicals or abrasive cleaners. Avoid getting water into electronic components.

6.2 Opbevaring

Store the hoverboard in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure the battery is partially charged (around 50%) and recharge it every few months to maintain battery health.

7. Fejlfinding

• Hoverboard beeps continuously: This usually indicates the hoverboard is not on a flat surface or is not properly balanced. Place it on a level surface before powering on or stepping on.
• Hoverboard not turning on: Ensure the battery is charged. If not, connect the charger and allow it to charge for 2-3 hours.
• Reduced performance or range: This may indicate a low battery. Recharge the hoverboard. Performance can also be affected by terrain, rider weight, and riding style.
• Lys virker ikke: Check if the hoverboard is powered on and fully charged. If issues persist, contact customer support.

8. Specifikationer

9. Garanti og support

For warranty information or technical support, please refer to the documentation included with your product or contact SISIGAD customer service. Keep your purchase receipt as proof of purchase.