Indledning
This manual provides detailed instructions for the installation, operation, and maintenance of your Fantech 98506 PRO Plus Exhaust Fan. Please read this manual thoroughly before installation and use to ensure proper function and safety.
The Fantech 98506 PRO Plus is a high-performance exhaust fan designed for quiet and energy-efficient ventilation in bathrooms, powder rooms, and other areas up to 130 sq. ft. It features advanced motion and humidity sensors, a built-in backdraft damper, and a high-efficiency motor.
Sikkerhedsoplysninger
ADVARSEL:
- Afbryd altid strømmen før service eller rengøring af enheden.
- Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med alle lokale og nationale el-forskrifter.
- Brug ikke denne blæser med nogen solid-state hastighedsregulator.
- Sørg for korrekt jording for at reducere risikoen for elektrisk stød.
- Denne ventilator er kun til generel ventilation. Må ikke bruges til at udsuge farlige eller eksplosive materialer og dampe.
Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- Fantech 98506 PRO Plus Exhaust Fan unit
- Sensor Grille
- Adjustable 12-24" Bar Hanger
- Installation Hardware (e.g., screws, wire nuts)
If any parts are missing or damaged, contact Fantech customer support immediately.
Opsætning og installation
The Fantech 98506 PRO Plus is designed for surface mount installation and uses a 6-inch flexible duct.
Tjekliste før installation:
- Sørg for, at installationsområdet er frit og tilgængeligt.
- Confirm power supply is 120 Volts AC.
- Gather necessary tools: screwdriver, wire strippers, drill, measuring tape, utility knife, safety glasses, gloves.
- Verify ductwork is ready for a 6-inch connection.
Installationstrin:
- Forbered åbningen: Create an appropriate opening in the ceiling or wall for the fan housing. Refer to the fan's specific dimensions provided in the installation guide that accompanies the product.
- Mount the Housing: Use the adjustable 12-24" bar hangers to securely mount the fan housing between joists or studs. Ensure the housing is level.
- Connect Ductwork: Attach the 6-inch flexible duct to the fan's duct collar. Secure with a duct clamp (not included). Ensure the duct run is as straight and short as possible for optimal performance.
- Elektriske ledninger:
- Sluk for strømmen ved afbryderen før ledningsføring.
- Remove the electrical access plate on the fan housing.
- Connect the household wiring to the fan's wiring according to the wiring diagram provided with the unit (typically black to black, white to white, green/bare to ground).
- Secure all connections with wire nuts.
- Replace the electrical access plate.
- Install Grille: Once the fan housing and wiring are complete, attach the sensor grille to the fan housing. The grille typically snaps into place or is secured with small screws.
Image: The Fantech 98506 PRO Plus Exhaust Fan showing the main unit, duct connection, and the white sensor grille. This view illustrates the components involved in the surface mount installation.
Betjeningsvejledning
The Fantech 98506 PRO Plus Exhaust Fan is designed for automatic and manual operation, featuring integrated motion and humidity sensors.
Luftstrømsindstillinger:
The fan offers four adjustable airflow settings: 80, 90, 110, and 140 cubic feet per minute (cfm). These settings are typically adjusted via a switch or dial located on the fan unit or sensor grille. Consult the specific wiring diagram for details on how to select the desired CFM setting during installation or initial setup.
Sensordrift:
- Bevægelsessensor: The fan will activate automatically when motion is detected in the room. It will continue to run for a set period after motion ceases (this duration is often adjustable, refer to specific sensor instructions).
- Fugtighedssensor: The fan will activate automatically when the humidity level in the room exceeds a pre-set threshold. It will continue to run until the humidity level drops below the threshold. The sensitivity of the humidity sensor may be adjustable.
For optimal performance, ensure the sensors are not obstructed and are positioned to effectively monitor the room conditions.
Opretholdelse
Regular maintenance ensures the longevity and efficient operation of your Fantech exhaust fan.
Cleaning the Grille and Fan Blades:
- Afbryd strømmen: Always turn off power to the fan at the circuit breaker before cleaning.
- Fjern gitter: Carefully remove the sensor grille from the fan housing.
- Rengør gitter: Wash the grille with mild soap and water. Rinse thoroughly and allow to dry completely before reinstallation.
- Rengør ventilatorblade: Use a soft cloth or brush to gently wipe dust and debris from the fan blades and interior of the housing. A vacuum cleaner with a brush attachment can also be used. Do not use abrasive cleaners or solvents.
- Reinstall Grille: Once clean and dry, reattach the grille to the fan housing.
- Gendan strøm: Tænd for strømmen igen ved afbryderen.
Frequency: Clean the grille and fan blades at least once every six months, or more frequently in dusty environments.
Fejlfinding
Se følgende tabel for almindelige problemer og deres løsninger.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ventilatoren tænder ikke. | Ingen strøm til enheden. Effektafbryder udløst. Løs ledningsforbindelse. Sensorfejl. |
Tjek strømforsyningen. Nulstil afbryder. Kontroller ledningsforbindelserne (med strømmen slukket). Contact Fantech support if sensors are suspected. |
| Blæseren larmer. | Ventilatorbladene er beskidte. Løs montering. Obstruction in ductwork. Motor problem. |
Rengør ventilatorbladene. Sørg for, at ventilatorhuset er sikkert monteret. Check ductwork for blockages. Contact Fantech support. |
| Ventilatoren kører kontinuerligt. | Humidity sensor setting too low. Motion sensor constantly triggered. Ledningsproblem. |
Adjust humidity sensor threshold. Ensure no constant motion in sensor's field of view. Bekræft ledninger. |
| Poor ventilation performance. | Ductwork obstruction or leak. Incorrect CFM setting. Ventilatorbladene er beskidte. |
Check ductwork for blockages or leaks. Verify CFM setting is appropriate for room size. Rengør ventilatorbladene. |
If the problem persists after attempting these solutions, please contact Fantech customer support.
Specifikationer
| Attribut | Værdi |
|---|---|
| Modelnummer | 98506 |
| Mærke | FANTECH |
| Luftmængde kapacitet | 140 CFM (adjustable to 80, 90, 110 CFM) |
| Kanalstørrelse | 6 tommer |
| Voltage | 120 Volt AC |
| Wattage | 26 watt |
| Sones Rating | Less than 0.5 Sones |
| Sensorer | Motion and Humidity |
| Monteringstype | Surface Mount (with adjustable 12-24" bar hanger) |
| Certificeringer | ETL Listed, ENERGY STAR, HVI Qualified, California Title 24 Listed |
| Anbefalet rumstørrelse | Op til 130 sq. ft. |
| Dimensioner (ca. pakke) | 18.1 x 14.68 x 10.24 tommer |
| Vægt (ca. pakke) | 14 pund |
Garantioplysninger
Fantech products are manufactured to the highest quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Fantech webwebsted. Gem din købsbevis til garantikrav.
Kundesupport
For technical assistance, replacement parts, or warranty inquiries, please contact Fantech customer support:
- Webwebsted: www.fantech.net
- Telefon: Refer to the contact information on the Fantech webwebsted eller produktemballage.
When contacting support, please have your model number (98506) and purchase date available.
