Indledning
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Boreal BRISA 18,000 BTU 16 SEER Wall Mount Ductless Mini Split System. Please read this manual thoroughly before using the product and retain it for future reference.
Figur 1: Boreal BRISA 18,000 BTU Mini Split System components, including the indoor wall-mounted air handler, the outdoor condenser unit, and the wireless remote control.
Sikkerhedsoplysninger
Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af enheden.
- Professionel installation: Installation must be performed by a state-licensed HVAC contractor. Improper installation can lead to electric shock, fire, water leakage, and may void the warranty.
- Strømforsyning: Ensure the unit is connected to a 230V power supply. Do not use extension cords or multi-outlet adapters.
- Kølemiddel: This system uses R410A refrigerant. Handling of refrigerant should only be done by qualified personnel.
- Elektrisk sikkerhed: Do not operate the unit with wet hands. Disconnect power before cleaning or performing maintenance.
- Klarering: Sørg for tilstrækkelig afstand omkring både indendørs og udendørs enheder for korrekt luftgennemstrømning og vedligeholdelse.
Opsætning og installation
This section outlines the general steps for setting up your Boreal BRISA Mini Split System. Note: Detailed installation instructions are provided in a separate installation manual intended for licensed HVAC professionals. This overview is for informational purposes only.
Komponenter inkluderet:
- Indoor Wall Mounted Air Handler
- Udendørs kondensatorenhed
- Trådløs fjernbetjening
Lineset and electrical wiring are required but not included with the system.
Installation overståetview:
- Placering af indendørsenhed: Select a location on an interior wall that allows for optimal air distribution and drainage. Ensure sufficient space around the unit for maintenance.
- Placering af udendørsenhed: Position the outdoor condenser unit on a stable, level surface, away from direct sunlight or obstructions. Ensure proper airflow and drainage.
- Tilslutning af kølemiddelledninger: The indoor and outdoor units are connected via refrigerant lines (lineset). This process requires specialized tools and expertise to ensure proper sealing and vacuuming.
- Elektriske ledninger: Connect the indoor and outdoor units to the main power supply (230V) and to each other according to wiring diagrams. All electrical work must comply with local codes.
- Dræning: Install drainage lines for condensate removal from the indoor unit.
- Systemtest: After installation, a licensed technician will perform a system test to verify proper operation, check for leaks, and ensure optimal performance.
Figur 2: The Boreal BRISA indoor unit, designed for wall mounting, showing its sleek white casing og digitalt display.
Figur 3: The Boreal BRISA outdoor condenser unit, featuring a protective grille over the fan and the Boreal Air Conditioning Inverter branding.
Betjeningsvejledning
Your Boreal BRISA Mini Split System is controlled by the included wireless remote control.
Fjernbetjeningsfunktioner:
- ON/OFF knap: Tænder eller slukker for enheden.
- MODE knap: Cycles through operating modes: Cool, Heat, Fan, Dry, Auto.
- TEMP ▲/▼ knapper: Justerer den ønskede temperaturindstilling.
- FAN knap: Justerer ventilatorhastigheden (Auto, Lav, Mellem, Høj).
- SWING knap: Controls the louver movement for air direction.
- TIMER knap: Indstiller timeren for automatisk tænding eller automatisk slukning.
- SLEEP knap: Aktiverer dvaletilstand for stille drift og energibesparelse under søvn.
- JEG FØLER-knap: Activates the "I Feel" function, which senses the temperature at the remote's location for more precise comfort.
Grundlæggende betjening:
- Tænd: Press the ON/OFF button on the remote control. The indoor unit display will illuminate.
- Vælg tilstand: Press the MODE button repeatedly until your desired operating mode (e.g., Cool for cooling, Heat for heating) is displayed on the remote.
- Indstil temperatur: Use the TEMP ▲ or ▼ buttons to set your preferred temperature. For optimal energy efficiency, set cooling to 75-78°F (24-26°C) and heating to 68-72°F (20-22°C).
- Adjust Fan Speed (Optional): Press the FAN button to cycle through fan speed options. Auto mode is recommended for general use.
- Sluk: Tryk på ON/OFF-knappen igen for at slukke for enheden.
Opretholdelse
Regular maintenance ensures optimal performance and longevity of your Boreal BRISA system. Always disconnect power to the unit before performing any maintenance.
Vedligeholdelse af indendørsenhed:
- Rengøring af luftfilter:
The air filters should be cleaned every 2-4 weeks, or more frequently depending on usage and air quality. Open the front panel of the indoor unit, remove the filters, and wash them with lukewarm water and mild detergent. Rinse thoroughly, allow to air dry completely, and then reinsert.
- Rengøring af enhedens overflade:
Tør overfladen på indendørsenheden af med en blød, tør klud.amp klud. Brug ikke skrappe kemikalier, slibemidler eller opløsningsmidler.
Vedligeholdelse af udendørsenhed:
- Rengøring af spole:
Periodically check the outdoor coil for dirt, leaves, and debris. Gently clean with a soft brush or rinse with a garden hose. Avoid bending the coil fins.
- Klarering:
Ensure that the area around the outdoor unit remains clear of obstructions (e.g., plants, snow, debris) to maintain proper airflow.
- Professionel inspektion:
It is recommended to have a licensed HVAC technician inspect and service your system annually to ensure all components are functioning correctly and to check refrigerant levels.
Fejlfinding
Før du kontakter kundesupport, bedes du læse følgende almindelige problemer og løsninger.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tænder ikke. | No power; remote control batteries dead; unit in timer mode. | Check circuit breaker; replace remote batteries; cancel timer setting. |
| Utilstrækkelig køling/opvarmning. | Dirty air filters; blocked outdoor unit; wrong mode selected; temperature setting too high/low. | Clean air filters; clear obstructions from outdoor unit; select correct mode; adjust temperature setting. |
| Vandlækage fra indendørsenheden. | Tilstoppet afløbsslange; forkert installation. | Clear drain hose obstruction; contact a licensed technician for inspection. |
| Usædvanlig støj. | Loose parts; fan obstruction; normal operating sounds (e.g., refrigerant flow). | Check for loose parts; remove obstructions; if noise persists or is abnormal, contact a technician. |
If the problem persists after attempting these solutions, please contact Boreal customer support or a licensed HVAC technician.
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Boreal |
| Modelnavn | BRISE |
| Modelnummer | BRS18HPJ1A / 813919021420 |
| Kapacitet | 18,000 BTU (1.5 tons) |
| Sæsonbestemt energieffektivitetsforhold (SEER) | 16 |
| Energieffektivitetsforhold (EER) | 8.5 |
| Heating Seasonal Performance Factor (HSPF) | 9 |
| Ydelseskoefficient (COP) | 3 |
| Voltage | 230 volt |
| Strømkilde | Elektrisk med ledning |
| Kølevæsketype | R410A |
| Sound Level (Outdoor) | 56 dB |
| Rumdækning | 600 - 1,000 kvadratfod |
| Særlige funktioner | Fjernstyret |
Figur 4: Dimensions for Boreal Brisa indoor and outdoor units. For the 18,000 BTU model, the indoor unit measures 38" x 11.75" x 8.75" and the outdoor unit measures 35.75" x 25" x 12.25".
Garantioplysninger
Boreal provides the following manufacturer's warranty for this product:
- Dele: Tre (3) år på alle dele.
- Kompressor: Fem (5) år på kompressoren.
Vigtig bemærkning: To be eligible for warranty coverage, installation must be performed by a state-licensed HVAC contractor. Please retain your installation receipt and proof of purchase.
Kundesupport
For technical assistance, warranty claims, or further inquiries, please contact Boreal customer support. Refer to your product packaging or the Boreal official webhjemmeside for de seneste kontaktoplysninger.
When contacting support, please have your model number (BRS18HPJ1A / 813919021420) and purchase date available.
