BuTure BR600 Bærbar Bilstarter Brugermanual

1. Produktet er slutview

The BuTure BR600 is a powerful and versatile portable car jump starter designed to provide emergency starting power for 12V vehicles. It also functions as a portable power bank with wireless charging capabilities and a multi-mode LED flashlight. This manual provides essential information for safe and effective use of your device.

Nøglefunktioner:

• Kraftig starthjælp: Delivers 2500A peak current to start all gasoline engines and up to 8.0L diesel engines.
• Batteri med høj kapacitet: 27000mAh lithium battery for multiple jump starts and device charging.
• Trådløs opladning: Integrated 10W wireless charging pad for compatible smartphones.
• Bærbar Power Bank: Equipped with USB 1 (Quick Charge 3.0: 5V 3A / 9V 2A / 12V 1.5A), USB 2 (5V 2.4A), and USB-C (5V 3A) outputs for charging various electronic devices.
• Smart Protection Clamps: Features intelligent protection against short circuits, overheating, over-voltage, over-charge, deep discharge, over-current, and reverse polarity.
• Multi-mode LED-lommelygte: Includes Flashlight, Strobe, SOS, and Warning Light modes for emergencies.
• Holdbart design: Operates effectively in extreme temperatures, including cold winter conditions.

2. Pakkens indhold

Kontroller venligst pakkens indhold ved åbning. Hvis der mangler eller er beskadigede dele, skal du kontakte kundesupport.

Image: Contents of the BuTure BR600 package.

• 1 x BuTure BR600 Jump Starter
• 1 x Smart Jumper kabler
• 1 x USB-C kabel
• 1 x EC5 Cigarette Lighter Adapter
• 1 x brugermanual
• 1 x opbevaringskasse

3. Vigtige sikkerhedsoplysninger

Read all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Produktet må ikke nedsænkes i vand eller udsættes for regn.
• Do not open or disassemble the product. There are no user-serviceable parts inside.
• Opbevares utilgængeligt for børn.
• Use only the provided smart jumper cables.
• Start ikke med et frossent batteri.
• Sørg for korrekt polaritetstilslutning (rød ledning)amp til positiv, sort klamp til negativ).
• Forbind ikke den positive og negative clamps sammen.
• If the product becomes excessively hot during use, discontinue use immediately.
• Opbevar produktet på et køligt, tørt sted væk fra direkte sollys.
• Wear eye protection and gloves when jump starting a vehicle.
• Consult your vehicle's owner's manual for specific jump-starting procedures.

Image: The BuTure BR600 features multiple protection modes for safe operation, including error detection and intelligent indicators.

4. Charging the BuTure BR600

Oplad jumpstarteren helt før første brug. Det anbefales at genoplade enheden hver 3.-6. måned for at opretholde batteriets sundhed, selvom den ikke er i brug.

4.1. Charging via USB-C Input

1. Connect the provided USB-C cable to the USB-C input port on the jump starter.
2. Connect the other end of the USB-C cable to a USB wall adapter (not included) or a car charger.
3. The LED indicator lights will illuminate and flash to show the charging status. All four lights will be solid when fully charged.

4.2. Batteriniveauindikator

The LED indicator lights on the device show the remaining battery capacity:

• 4 lights: 75% - 100%
• 3 lights: 50% - 75%
• 2 lights: 25% - 50%
• 1 light: 0% - 25% (Recharge immediately)

Image: The BuTure BR600 features a 27000mAh battery designed for long standby times, up to 12 months.

5. Start af et køretøj med startkabler

Ensure the jump starter is at least 50% charged (2 LED lights) before attempting to jump start a vehicle.

1. Klargør køretøjet: Turn off the vehicle's ignition and all accessories (headlights, radio, air conditioning, etc.). Engage the parking brake.
2. Tilslut jumperkabler:
   • Insert the blue plug of the smart jumper cables into the 12V jump start port on the BuTure BR600. Ensure a firm connection.
   • Tilslut RØD positiv (+) clamp til køretøjets positive (+) batteripol.
   • Tilslut SORT negativ (-) clamp til køretøjets negative (-) batteripol.
   • Den smarte clamp indicator light will show the connection status. Refer to the smart clamp manual for specific light indications.
3. Start køretøjet: Once the smart clamp indicator shows a safe connection, start your vehicle's engine. If the vehicle does not start immediately, wait 20-30 seconds before trying again. Do not crank the engine for more than 3 seconds per attempt.
4. Remove Jumper Cables: Så snart køretøjet starter, skal du afbryde SORT negativ (-) clamp først, derefter RØD positiv (+) clamp from the vehicle battery. Finally, unplug the smart jumper cables from the BuTure BR600.

Vigtig: If the smart clamp indicates an error (e.g., reverse polarity), correct the connection before attempting to start the vehicle.

Image: Illustration of connecting the BuTure BR600 to a car battery for jump starting.

Image: Step-by-step guide showing how to connect the jump starter to the vehicle battery and then start the vehicle.

Image: The BuTure BR600 is designed to perform reliably even in cold winter temperatures down to -20°C.

6. Operating Other Functions

6.1. Using as a Power Bank (USB Output)

The BuTure BR600 can charge various electronic devices via its USB output ports.

• Connect your device's USB charging cable to either the USB 1 (Quick Charge 3.0) or USB 2 port on the jump starter.
• Jumpstarteren vil automatisk begynde at oplade din enhed.

6.2. Trådløs opladning

For devices compatible with 10W wireless charging:

• Place your wireless charging compatible device (e.g., smartphone) on the wireless charging pad located on the top surface of the jump starter.
• Sørg for, at enheden er centreret på puden for optimal opladning.
• The wireless charging indicator light will illuminate to confirm charging is active.

Image: The BuTure BR600 offers both 10W wireless charging and Quick Charge 3.0 USB output for multiple devices.

6.3. LED lommelygte

The built-in LED flashlight has multiple modes for different situations.

• Press and hold the power button for 3 seconds to turn on the flashlight (steady light mode).
• Press the power button again to cycle through modes: Strobe → SOS → Warning Light → Off.
• Press and hold the power button again for 3 seconds to turn off the flashlight from any mode.

Image: The BuTure BR600 features an ultra-bright LED flashlight with Flash, SOS, Strobe, and Warning light modes for various emergencies.

7. Vedligeholdelse

• Rensning: Brug en blød, tør klud til at rengøre enheden. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Opbevaring: Store the jump starter in a cool, dry place between 0°C and 45°C (32°F and 113°F). Avoid direct sunlight and high humidity.
• Genopladning: Recharge the device every 3-6 months to prevent battery degradation, even if not in use.
• Batterilevetid: The internal lithium battery is designed for long life, but like all rechargeable batteries, its capacity will decrease over time.

8. Fejlfinding

9. Specifikationer

10. Garanti og kundesupport

BuTure products are designed and manufactured to the highest quality standards. This product comes with a standard manufacturer's warranty. For detailed warranty information, product support, or technical assistance, please refer to the warranty card included in your package or visit the official BuTure webwebsted.

If you encounter any issues or have questions regarding your BuTure BR600, please contact our customer support team. Provide your model number (BR600) and purchase details for faster service.