1. Introduktion
Thank you for choosing the Geberit iCon Slim Toilet Seat. This manual provides essential information for the correct installation, operation, and maintenance of your new toilet seat. Please read these instructions carefully before installation and retain them for future reference.
The Geberit iCon Slim Toilet Seat is designed for comfort and hygiene, featuring a soft-close mechanism for quiet operation and quick-release hinges for easy cleaning. It is compatible with specific Geberit iCon wall-mounted and floor-standing WC models.

Figure 1: Geberit iCon Slim Toilet Seat (top view)
This image displays the Geberit iCon Slim Toilet Seat from a top-down perspective, highlighting its sleek, white, and slender design. The seat is closed, showing its smooth, contoured surface.
2. Opsætning og installation
The Geberit iCon Slim Toilet Seat is designed for mounting from above, simplifying the installation process. Ensure you have the necessary tools before beginning.
2.1 Pakkens indhold
- Geberit iCon Slim Toilet Seat with cover
- Quick Release Hinges (brass)
- Monteringsudstyr
2.2 Nødvendige værktøjer (ikke inkluderet)
- Screwdriver (appropriate type for mounting screws)
- Målebånd
2.3 Installationstrin
- Prepare the WC: Ensure the toilet bowl is clean and dry where the seat will be installed.
- Position Hængsler: Place the quick-release hinges into the mounting holes on the toilet bowl. The hinges are designed for mounting from above.
- Sikre hængsler: Insert the mounting hardware through the hinges and tighten them from above. Do not overtighten, as this may damage the ceramic.
- Fastgør sæde: Align the toilet seat with the secured hinges and press down firmly until it clicks into place. The quick-release mechanism allows for easy attachment and detachment.
- Test funktionalitet: Gently close the seat and lid to confirm the soft-close mechanism operates smoothly. Ensure the seat is stable and does not wobble.
2.4 Dimensional Information
Refer to the following diagrams for detailed dimensions to ensure compatibility with your WC.

Figur 2: Side View Dimensioner
This diagram shows the side profile of the toilet seat with key dimensions: total length approximately 465 mm and seat height approximately 20 mm.

Figur 3: Forside View Dimensioner
This diagram illustrates the front view of the toilet seat, indicating a total width of approximately 365 mm and a lid thickness of approximately 5 mm.

Figur 4: Øverst View Monteringsdimensioner
This diagram provides a top-down view with critical mounting dimensions: total width approximately 450 mm, bolt spacing approximately 285 mm, distance from back edge to bolt holes approximately 155 mm, and distance from front edge to bolt holes approximately 230 mm.
3. Betjeningsvejledning
3.1 Soft-Close Mechanism
The toilet seat and lid are equipped with an automatic lowering mechanism. To close, simply push the seat or lid down gently. The soft-close function will engage, allowing it to lower slowly and quietly without slamming.
3.2 Quick Release Function
For thorough cleaning, the toilet seat can be easily removed from its hinges. Locate the quick-release buttons or levers near the hinges (specific design may vary slightly). Press or lift these mechanisms to disengage the seat from the mounting posts. To reattach, align the seat with the posts and press down until it clicks securely into place.
4. Vedligeholdelse og rengøring
Regular cleaning will help maintain the appearance and hygiene of your Geberit iCon Slim Toilet Seat. The seat material is antibacterial for enhanced cleanliness.
4.1 Rengøringsinstruktioner
- Use mild soap and water with a soft cloth or sponge.
- Avoid abrasive cleaners, scouring pads, or harsh chemicals (e.g., bleach, strong acids/alkalis), as these can damage the surface and the antibacterial properties.
- For thorough cleaning, utilize the quick-release function to remove the seat and clean the hinges and surrounding areas of the WC.
- Dry the seat and hinges thoroughly after cleaning.
4.2 Hinge Care
The brass hinges are durable, but occasional inspection for tightness is recommended. If the seat feels loose, gently tighten the mounting screws from above. Do not overtighten.
5. Fejlfinding
This section addresses common issues you might encounter with your toilet seat.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Seat is loose or wobbles | Monteringsskruerne er løse. | Tighten the mounting screws from above. Do not overtighten. |
| Soft-close mechanism not working | Mechanism obstructed or damaged. | Ensure no debris is obstructing the hinges. If damaged, contact Geberit customer support. |
| Seat difficult to remove/attach | Quick-release mechanism not fully engaged/disengaged. | Ensure quick-release buttons/levers are fully activated. Check for obstructions. |
6. Specifikationer
Technical details for the Geberit iCon Slim Toilet Seat.
| Feature | Detalje |
|---|---|
| Modelnummer | 500.835.01.1 |
| Mærke | Geberit |
| Farve | Hvid |
| Materiale | Plastic (antibacterial) |
| Stil | Slim Design, Traditional |
| Funktioner | Soft-Close Mechanism, Quick Release Hinges (brass), Mounting from above |
| Varens vægt | 2694 gram (ca. 5.94 lbs) |
| Produktmål (ca.) | Længde: 465 mm (18.3 tommer) Bredde: 365 mm (14.4 tommer) Højde: 20 mm (0.8 tommer) |
| Mounting Hole Spacing (approx.) | 285 mm (11.2 tommer) |
7. Garanti og support
For information regarding warranty coverage or technical support, please refer to the documentation provided with your purchase or visit the official Geberit webKontaktoplysninger til kundeservice kan typisk findes der.





