1. Introduktion
This manual provides essential instructions for the proper use, care, and maintenance of your Seiko Presage Automatic Men's Watch, Model SRPE45J1. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece. The Seiko Presage series is renowned for its mechanical movements and elegant design.

Figur 1: Forside view of the Seiko Presage Automatic Men's Watch SRPE45J1, featuring a distinctive green dial and a brown leather strap.
2. Opsætning
2.1 Udpakning og første inspektion
Carefully remove the watch from its packaging. Inspect the watch for any visible damage. Ensure all protective films are removed from the crystal and case back before use.
2.2 Winding the Mainspring
Your Seiko Presage SRPE45J1 features an automatic mechanical movement. While it winds itself through wrist motion, it can also be manually wound:
- Ensure the crown is in the normal position (not pulled out).
- Turn the crown clockwise slowly for approximately 30-40 rotations. This will provide sufficient power reserve to start the watch.
- The watch will continue to wind automatically with normal wrist movement.
2.3 Indstilling af klokkeslæt
- Træk kronen ud til andet klik position. The second hand will stop.
- Turn the crown to move the hour and minute hands to the desired time. To ensure accurate time setting, it is recommended to set the time a few minutes ahead and then turn the hands counter-clockwise to the correct time.
- Push the crown back into the normal position. The second hand will resume movement.
2.4 Indstilling af dato
- Træk kronen ud til første klik position.
- Drej kronen mod uret to adjust the date. Avoid setting the date between 9:00 PM and 3:00 AM, as this can interfere with the automatic date change mechanism.
- Once the correct date is displayed, push the crown back into the normal position.

Figur 2: Side view of the watch, highlighting the crown used for winding and setting time/date.
3. Betjening
3.1 Automatisk urværk
The SRPE45J1 is powered by an automatic mechanical movement. This means the watch is wound by the natural motion of your wrist. When worn regularly, it should maintain its power reserve. If the watch is not worn for an extended period, it may stop and require manual winding as described in the Setup section.
3.2 Gangreserve
A fully wound mainspring provides approximately 41 timer of power reserve. If the watch is not worn for this duration, it will stop. To restart, gently shake the watch from side to side in a horizontal arc for about 30 seconds, or manually wind it.
3.3 Vandtæthed
This watch has a water resistance rating of 5 BAR (50 meter). This rating means it is suitable for everyday use and can withstand splashes, rain, and brief immersion in water. It is ikke egnet for swimming, showering, or diving. Always ensure the crown is fully pushed in before any contact with water.
4. Vedligeholdelse
4.1 Rengøring
- Case and Crystal: Wipe regularly with a soft, dry cloth to remove dust and fingerprints. For stubborn dirt, a slightly damp en klud kan bruges, efterfulgt af en tør klud.
- Læderrem: Avoid prolonged exposure to water, direct sunlight, and extreme temperatures, as these can cause the leather to dry, crack, or discolor. Clean with a soft, dry cloth. If it gets wet, allow it to air dry naturally, away from direct heat.
4.2 Opbevaring
Når du ikke har dit ur på, skal du opbevare det køligt og tørt, væk fra direkte sollys og stærke magnetfelter. Hvis du opbevarer det i længere tid, bør du overveje en uroptrækker for at holde det automatiske urværk kørende og smurt.
4.3 Professionel service
For optimal performance and longevity, it is recommended to have your watch inspected and serviced by an authorized Seiko service center every 3 to 5 years. This includes checking the movement, seals, and overall condition of the watch.
5. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Uret er stoppet eller går intermitterende. | Utilstrækkelig effektreserve. | Manually wind the watch by turning the crown clockwise 30-40 times, or wear it for several hours to allow the automatic movement to wind. |
| Tidspunktet eller datoen er forkert. | Incorrect setting or watch stopped. | Refer to sections 2.3 (Setting the Time) and 2.4 (Setting the Date) to re-set. Ensure the watch has sufficient power reserve. |
| Condensation appears under the crystal. | Temperature change or water ingress. | This indicates a potential issue with water resistance. Seek immediate professional servicing to prevent damage to the movement. |
| Uret går for hurtigt eller for langsomt. | Magnetization or need for regulation. | Avoid strong magnetic fields. If the issue persists, professional regulation by an authorized service center is required. |
6. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | SEIKO |
| Modelnummer | SRPE45J1 |
| Bevægelsestype | Automatic Mechanical (Caliber 4R35) |
| Etui materiale | Rustfrit stål |
| Urskive farve | Grøn |
| Remmateriale | Leather (Brown) |
| Stroppebredde | 20 mm |
| Spændetype | Tang spænde |
| Vandmodstand | 5 BAR (50 meter) |
| Funktioner | Timer, minutter, sekunder, dato |
| Power Reserve | Cirka 41 timer |
7. Garanti og support
7.1 Garantioplysninger
Your Seiko watch is covered by a limited warranty against manufacturing defects. The specific terms and duration of the warranty may vary by region. Please refer to the warranty card included with your purchase or visit the official Seiko webwebsted for detaljerede oplysninger.
7.2 Kundesupport
For further assistance, technical support, or to locate an authorized service center, please visit the official SEIKO website or contact their customer service department. Keep your purchase receipt and warranty card handy when seeking support.
Official SEIKO Store: Visit the SEIKO Store on Amazon





