KEF KW1TXRX trådløst subwooferadaptersæt brugermanual

1. Introduktion

The KEF KW1TXRX Wireless Subwoofer Adapter Kit provides a high-quality, wireless audio connection for compatible KEF subwoofers. This kit allows for flexible placement of your subwoofer without the need for long, unsightly cables, ensuring optimal sound performance and room aesthetics. Operating in the 5GHz band, the KW1TXRX delivers audio up to 24bit/48kHz with minimal latency, preserving the detail and impact of your audio.

Hvad er der i æsken

• Trådløs sender
• Trådløs modtager
• USB kabel
• RCA-kabel
• RCA adapter

Nøglefunktioner

• Wireless subwoofer kit, compatible with KEF Kube8b, Kube10b, Kube12b, and KF92 Subwoofers.
• High-quality wireless transmission delivers every ounce of detail and impact from your favourite films and music.
• Operates in the high-bandwidth 5GHz band, delivering audio up to 24bit/48kHz.
• Features a range of up to 30m (line of sight) making optimal placement easy.
• Designed with latency of less than 17ms.

2. Sikkerhedsoplysninger

Læs og forstå venligst alle sikkerhedsinstruktioner, før du bruger dette produkt. Gem denne manual til senere brug.

• Udsæt ikke enheden for regn, fugt, dryp eller sprøjt.
• Placer ikke genstande fyldt med væske, såsom vaser, på enheden.
• Sørg for ordentlig ventilation; bloker ikke ventilationsåbninger.
• Brug kun tilbehør/tilbehør specificeret af producenten.
• Disconnect the device during lightning storms or when unused for long periods.
• Overlad al service til kvalificeret servicepersonale.

3. Opsætning og installation

Image: The KEF KW1TXRX Wireless Subwoofer Adapter Kit, showing both the transmitter (left) and receiver (right) units. Both are compact, black, and feature the KEF logo.

Billede: Bagside view of the KEF KW1TXRX transmitter unit. It features a 'PAIR' button, 'LINE IN' RCA inputs (white and red), and a 5V==1A USB power input.

Tilslutning af senderen

1. Connect the provided USB cable to the 5V==1A port on the transmitter unit. Connect the other end of the USB cable to a suitable USB power source (e.g., a USB wall adapter, not included, or a USB port on your audio source device if available).
2. Using the supplied RCA cable and adaptor, connect the 'LINE IN' RCA inputs on the transmitter to the subwoofer output (LFE or Sub Out) of your audio source (e.g., AV receiver, pre-amplifier). Ensure correct polarity (red to red, white to white if applicable, or use the single LFE connection).
3. Place the transmitter in a location that allows for a clear line of sight to the receiver, ideally within 30 meters.

Tilslutning af modtageren

Image: The KEF KW1TXRX receiver unit is shown attached to the rear panel of a KEF KF92 subwoofer. The receiver plugs directly into a dedicated port on the subwoofer.

Billede: Et nærbillede view of the KEF KW1TXRX receiver unit plugged into the back of a KEF Kube series subwoofer. The receiver is designed to integrate seamlessly with compatible KEF subwoofers.

1. The receiver unit is designed to plug directly into compatible KEF subwoofers (Kube8b, Kube10b, Kube12b, KF92) via a dedicated port. Align the receiver with the port on your subwoofer and gently push it in until it is securely seated.
2. Ensure the subwoofer is powered on. The receiver draws power directly from the subwoofer.

Pairing the Units

The transmitter and receiver units are typically pre-paired from the factory. If they do not connect automatically, follow these steps to manually pair them:

1. Sørg for, at både sender- og modtagerenhed er tændt.
2. Press and hold the 'PAIR' button on the transmitter unit for a few seconds until its indicator light begins to flash.
3. Within 30 seconds, press and hold the 'PAIR' button on the receiver unit (located on the side or top, depending on the model) until its indicator light also begins to flash.
4. Once both lights stop flashing and remain solid, the units are successfully paired.

4. Betjening

Once the KEF KW1TXRX units are set up and paired, they will automatically establish a wireless audio link when powered on. The system operates on the 5GHz frequency band to minimize interference and ensure stable, high-fidelity audio transmission.

• Lydkvalitet: The system supports audio transmission up to 24-bit/48kHz, ensuring that the subwoofer receives a high-resolution signal.
• Latency: With a latency of less than 17ms, the audio signal is transmitted with minimal delay, ensuring synchronization with your main speakers.
• Rækkevidde: The effective operating range is up to 30 meters (line of sight). Obstacles suchs as walls or large furniture may reduce this range.

5. Vedligeholdelse

To ensure the longevity and optimal performance of your KEF KW1TXRX Wireless Subwoofer Adapter Kit, follow these simple maintenance guidelines:

• Rensning: Use a soft, dry cloth to wipe the surfaces of the transmitter and receiver. Do not use liquid cleaners, aerosols, or abrasive chemicals, as these can damage the finish or internal components.
• Placering: Avoid placing the units in direct sunlight, near heat sources, or in areas with high humidity or extreme temperatures.
• Opbevaring: Hvis enhederne opbevares i længere tid, skal de afbrydes fra strømmen og opbevares et køligt og tørt sted.
• Håndtering: Håndter enhederne forsigtigt. Undgå at tabe dem eller udsætte dem for kraftige stød.

6. Fejlfinding

If you encounter issues with your KEF KW1TXRX kit, please refer to the following common troubleshooting steps:

7. Specifikationer

8. Garanti og support

For warranty information and technical support, please refer to the official KEF website or contact KEF customer service directly. Keep your proof of purchase for any warranty claims.

Online ressourcer: Besøg us.kef.com til produktregistrering, ofte stillede spørgsmål og yderligere supportmaterialer.