Indledning
This manual provides essential information for the proper installation, usage, and maintenance of your Mammoth Type 88 Matte Black Wheel. Please read these instructions thoroughly before proceeding with installation or use to ensure optimal performance and safety. This wheel is specifically designed for 2007-2018 Jeep Wrangler JK models.
Image: The Mammoth Type 88 Matte Black Wheel, showcasing its design and finish.
Opsætning og installation
The Mammoth Type 88 wheel features an easy bolt-on installation process. It is recommended that installation be performed by individuals with moderate to expert-level mechanical skills. The estimated installation time per wheel is approximately 10-30 minutes.
Udpakning og inspektion
Upon receiving your wheel, carefully unbox it and inspect for any signs of damage during transit. Each wheel is packaged with multiple layers of protection to ensure its integrity.
Video: This video demonstrates the robust packaging and unboxing process for Road Ready Wheels, which applies to the careful handling of your Mammoth wheel.
Installationstrin
- Sørg for, at køretøjet er sikkert løftet og understøttet på donkrafte.
- Remove the existing wheel and tire assembly.
- Clean the wheel hub surface to ensure proper seating of the new wheel.
- Mount the Mammoth Type 88 wheel onto the hub, aligning the bolt pattern (5 x 127mm or 5 x 5 inches).
- Install lug nuts and hand-tighten them.
- Lower the vehicle partially so the tire just touches the ground, then torque the lug nuts to the manufacturer's specified values in a star pattern.
- Fully lower the vehicle and re-torque the lug nuts after 50-100 miles of driving.
Billede: En detaljeret view of the Mammoth Type 88 wheel, highlighting its spoke design and lug nut holes.
Brug og kompatibilitet
The Mammoth Type 88 Matte Black Wheel is designed to enhance the appearance and performance of your 2007-2018 Jeep Wrangler JK. Its 17x9 inch size with a -6mm offset and 5x127mm bolt pattern ensures precise fitment and optimal driving stability.
Køretøjsmontering
- Compatible with 2007-2018 Jeep Wrangler JK models.
- Backspacing: 4.764 inches (121mm).
- Bolt Pattern: 5 x 127mm (5 x 5 inches).
Image: A Jeep Wrangler JK equipped with Mammoth wheels, shown at stock ride height.
Image: A Jeep Wrangler JK featuring Mammoth wheels and a 2.5-inch lift kit, demonstrating enhanced clearance.
Pleje og vedligeholdelse
To maintain the appearance and longevity of your Mammoth Type 88 wheels, follow these care guidelines:
- Regelmæssig rengøring: Clean wheels regularly with mild soap and water. Avoid harsh chemicals, abrasive cleaners, or stiff brushes that can damage the matte finish.
- Beskyttende finish: The wheels are coated with a durable matte clear coat finish. This finish provides protection against environmental elements.
- Avoid Automatic Car Washes: Some automatic car washes use strong chemicals or abrasive brushes that can harm the wheel's finish. Hand washing is recommended.
- Dækmontering: When mounting new tires, ensure that the tire technician uses proper equipment and techniques to avoid scratching or damaging the wheel.
Fejlfinding
If you encounter any issues with your Mammoth Type 88 wheels, consider the following common troubleshooting steps:
- Vibration: If you experience vibrations after installation, ensure that the wheels are properly balanced and that lug nuts are torqued to specification. Wheel alignment should also be checked.
- Usædvanlige lyde: Investigate any unusual noises immediately. This could indicate loose components or interference with other vehicle parts.
- Skade: For any significant damage (e.g., bends, cracks), discontinue use and consult a professional wheel repair specialist or contact customer support.
Produktspecifikationer
| Feature | Specifikation |
|---|---|
| Mærke | Mammoth |
| Modelnavn | Type 88 |
| Producentens varenummer | J133427-JK |
| Hjulstørrelse | 17 tommer |
| Fælgbredde | 9 tommer |
| Offset | -6 mm |
| Bolt mønster | 5 x 127 mm (5 x 5 tommer) |
| Backspace | 4.764 tommer (121 mm) |
| Farve | Mat sort |
| Materiale | Aluminiumlegering stål |
| Varens vægt | 25.3 pund |
| UPC | 840179419230 |
Garantioplysninger
Mammoth provides a limited lifetime structural warranty to the original purchaser. This warranty covers defects in materials and workmanship. It does not cover damage resulting from extensive modifications, abnormal wear, improper installation, accident, or misuse. Please retain your proof of purchase for warranty claims.
Kundesupport
For further assistance, technical support, or warranty inquiries, please contact Mammoth customer service. Refer to your purchase documentation or the retailer's webwebstedet for specifikke kontaktoplysninger.
Når du kontakter support, bedes du have følgende oplysninger klar:
- Product Model: Mammoth Type 88 Wheel
- Manufacturer Part Number: J133427-JK
- Købsdato
- Detaljeret beskrivelse af problemet
