Hanwha Techwin HCP-6320HA Full-HD 2MP analog HD PTZ domekamera brugermanual

Indledning

This manual provides essential instructions for the installation, operation, and maintenance of your Hanwha Techwin HCP-6320HA Full-HD 2MP Analog HD PTZ Dome Camera. Please read this manual thoroughly before using the product to ensure proper and safe operation.

Sikkerhedsoplysninger

• Installationen skal udføres af kvalificeret personale i overensstemmelse med alle lokale forskrifter og regler.
• Ensure the power supply (24V AC) matches the camera's requirements. Disconnect power before any installation or maintenance procedures.
• Do not expose the camera to extreme temperatures, humidity, or corrosive environments beyond its specified operating conditions.
• Avoid direct exposure of the lens to strong light sources, as this may damage the image sensor.
• This product is designed for outdoor use with IP66 weather protection and IK10 vandal resistance.

Pakkens indhold

Bekræft at alle komponenter er til stede i din pakke:

• HCP-6320HA PTZ Dome Camera
• Brugervejledning (dette dokument)
• Mounting hardware (if included in standard package)

Produkt overview

The Hanwha Techwin HCP-6320HA is a high-performance Full-HD 2MP Analog HD PTZ (Pan-Tilt-Zoom) dome camera designed for outdoor surveillance. It features a powerful 32x optical zoom lens (4.44-142.6mm), Day & Night functionality with an IR Cut Filter (ICR), Wide Dynamic Range (WDR 120dB), and advanced noise reduction (SSNRIII).

Figur 1: Front view of the Hanwha Techwin HCP-6320HA PTZ Dome Camera. The camera features a white dome housing with a clear protective bubble covering the lens assembly. The "Wisenet" logo is visible on the upper part of the dome.

Nøglefunktioner

• 2 Megapixel (1920 x 1080) Full HD Resolution
• 1/2.8" CMOS-sensor
• 32x Optical Zoom (4.44 ~ 142.6mm)
• Day & Night (ICR) and Defog functions
• WDR (120dB) and SSNRIII (Digital Noise Reduction)
• High-speed Pan/Tilt: 700°/sec preset speed
• IP66 Weatherproof and IK10 Vandal-Proof ratings
• Analog HD (AHD/TVI/CVI/CVBS selectable) video output
• RS-485 and Coaxitron (Up the Coax) control

Opsætning og installation

Montering af kameraet

The HCP-6320HA is designed for wall mounting. Ensure the mounting surface is strong enough to support the camera's weight (approximately 7 lbs) and any associated cabling.

1. Vælg et passende monteringssted, der giver det ønskede felt view and is within reach of power and video cables.
2. Use the provided mounting template (if applicable) to mark drilling points for the mounting bracket.
3. Drill pilot holes and secure the mounting bracket to the surface using appropriate screws and anchors.
4. Attach the camera to the mounting bracket, ensuring it is firmly secured.

Ledningsforbindelser

The camera requires a 24V AC power supply and uses wired connectivity for video and control.

1. Strømtilslutning: Connect the 24V AC power supply to the camera's power input. Ensure correct polarity.
2. Video output: Connect the analog HD video output (BNC connector) to your DVR or video monitoring system. The camera supports various analog HD formats (AHD, TVI, CVI) and CVBS, which can typically be selected via the OSD menu or DIP switches.
3. Control (Optional): For PTZ control, connect the RS-485 communication lines (Tx+/Tx-) to your DVR or PTZ controller. Alternatively, Coaxitron (Up the Coax) control can be used if supported by your DVR, eliminating the need for separate RS-485 wiring.

Indledende konfiguration

After physical installation and wiring, power on the camera. Access the camera's On-Screen Display (OSD) menu via your DVR or controller to configure settings such as video format, PTZ protocols, and image adjustments.

Betjening af kameraet

Panorering, vipning og zoom (PTZ) kontrol

The HCP-6320HA offers precise PTZ control, allowing you to remotely adjust the camera's viewindstillingsvinkel og zoomniveau.

• Pande: Rotate the camera horizontally (360° continuous).
• Vip: Adjust the camera vertically.
• Zoom: Use the 32x optical zoom to magnify distant objects.
• Fokus: The camera typically features auto-focus, but manual focus may be available via the OSD menu.

Preset and Tour Functions

Configure specific camera positions (presets) and sequences of presets (tours) for automated surveillance.

• Indstilling af forudindstillinger: Move the camera to the desired position, zoom, and focus, then save it as a preset through your DVR or controller interface. The camera supports high-speed preset recall.
• Running Tours: Create a tour by linking multiple presets in a specific order and duration.

Billedindstillinger

Adjust various image parameters through the OSD menu to optimize video quality for different lighting conditions.

• WDR (bredt dynamisk område): Improves visibility in scenes with both very bright and very dark areas.
• Dag nat: Automatically switches between color (day) and black & white (night) modes, utilizing the IR Cut Filter (ICR).
• SSNRIII: Reduces digital noise in low-light conditions.
• Defog: Enhances image clarity in foggy or hazy environments.

Opretholdelse

Rensning

• Regularly clean the camera's dome cover with a soft, damp klud til at fjerne støv og snavs. Undgå slibende rengøringsmidler.
• Ensure the lens is free from smudges or obstructions for clear image quality.

Firmware opdateringer

Periodically check the Hanwha Techwin website for firmware updates. Firmware updates can improve performance, add new features, or address security vulnerabilities. Follow the manufacturer's instructions carefully when performing updates.

Fejlfinding

Fælles problemer og løsninger

Specifikationer

Garanti og support

For warranty information and technical support, please refer to the official Hanwha Techwin webwebstedet eller kontakt din autoriserede forhandler. Gem din købskvittering til garantikrav.