Lepro PR410098-DWW-US

Lepro LED justerbar hvid stripelys (32.8 fod) brugsanvisning

Model: PR410098-DWW-US

1. Introduktion

Thank you for choosing the Lepro LED Tunable White Strip Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new LED strip light. Please read it thoroughly before use and retain it for future reference.

This LED strip light offers tunable white light, allowing you to select between warm white, neutral white, and cool white color temperatures. It is dimmable and features 600 high-brightness 2835 LEDs, providing uniform and adjustable illumination for various indoor applications.

2. Hvad er der i æsken

  • 1 x 32.8 fod LED Strip lys
  • 1 x IR fjernbetjening
  • 1 x Power Adapter (24V DC)

3. Sikkerhedsoplysninger

  • Kun indendørs brug: This product is designed for indoor use. Do not expose to water or high humidity.
  • Unfold Before Powering: Always unroll the entire LED strip before connecting it to power. Keeping it coiled while powered can cause overheating and damage.
  • Strømforsyning: Use only the provided power adapter. Using an incompatible power supply may damage the product and void the warranty.
  • Skæring af strimlen: The LED strip can be cut at designated marks (every 3 LEDs). Note: The section cut off will be unusable and cannot be reconnected. Ensure the power is disconnected before cutting.
  • Bøjning: Avoid bending the LED strip at sharp angles (e.g., 90 degrees) as this can damage the circuit board and LEDs. Gentle curves are acceptable.
  • Installationsoverflade: Sørg for, at installationsfladen er ren, tør og glat for optimal klæbeevne.
  • Børn og kæledyr: Opbevar produktet og dets komponenter utilgængeligt for børn og kæledyr.

4. Opsætning og installation

Follow these steps to install your Lepro LED Tunable White Strip Light:

  1. Forbered overfladen: Clean the desired installation surface thoroughly to remove dust, dirt, and grease. A clean, dry surface ensures strong adhesion.
  2. Mål og skær (valgfrit): If a shorter length is required, measure the desired length and cut the strip only at the designated cutting marks (indicated by a scissor icon or copper pads). Remember, cut sections cannot be reconnected.
  3. Fjern klæbepapir: Carefully peel off the protective backing from the 3M adhesive tape on the back of the LED strip.
  4. Påfør strimlen: Press the LED strip firmly onto the cleaned surface. Apply even pressure along the entire length to ensure good contact. Avoid sharp bends.
  5. Tilslut strøm: Connect the LED strip to the IR receiver, and then connect the IR receiver to the power adapter. Plug the power adapter into a standard electrical outlet.
Illustration of the plug-and-play setup for the Lepro LED strip light, showing the strip, connector, and power adapter.
Figure 4.1: Plug and Play Connection Diagram. The 10m strip connects to a 5.5mm*2.1mm connector, which then connects to the 1.5m power adapter.
Four-step installation guide for Lepro LED strip lights: clean surface, remove adhesive, cut to length, paste and press.
Figure 4.2: Installation Steps. 1. Clean the Surface. 2. Remove the Adhesive. 3. Cut out the Required Length. 4. Paste and Press.
Diagram showing how to cut the LED strip light and a warning against bending it at sharp angles.
Figure 4.3: Cutting and Bending Guidelines. The section cut off will be unusable. The light strip cannot be bent at sharp angles on a flat surface.

5. Betjeningsvejledning

Your Lepro LED strip light is controlled by the included IR remote control. Ensure there is a clear line of sight between the remote and the IR receiver on the strip.

Detailed diagram of the Lepro LED strip light remote control, labeling buttons for On/Off, brightness, color temperature, and scene modes.
Figure 5.1: Remote Control Functions. Please remove the insulation tab before first use.
  • Til/fra: Tryk på ON button to turn the lights on, and the SLUKKET knappen for at slukke dem.
  • 60s Auto Off: Tryk på 60S FRA button for a delayed shutdown.
  • Justering af lysstyrke: Brug Lysstyrke +/- buttons (sun icons) to increase or decrease the light intensity.
  • Valg af farvetemperatur:
    • Trykke WW for Warm White (3000K).
    • Trykke NW for Neutral White (4500K).
    • Trykke DW for Cool White (6000K).
  • Finjustering af farvetemperatur: Brug Colour Temperature +/- arrows to adjust the white light spectrum between warm and cool.
  • Fast/Slow Flash Mode: Tryk på MODE button to cycle through different flashing modes.
  • Scenetilstande: Select from pre-set scene modes for different ambiances:
    • Morning Scene (sun icon)
    • Evening Scene (sunset icon)
    • Night Scene (moon icon)
Remote control for Lepro LED strip light demonstrating warm, neutral, and cool white light settings in a kitchen.
Figure 5.2: Tunable White Options. Warm White, Neutral White, and Cool White demonstrated in a kitchen setting.

6. Vedligeholdelse

The Lepro LED Tunable White Strip Light requires minimal maintenance.

  • Rensning: Ensure the power is disconnected before cleaning. Gently wipe the LED strip with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Klæbemiddel: If the strip begins to peel, ensure the surface is clean and dry, then re-apply pressure. For long-term stability, consider using additional mounting clips (not included) if needed.
  • Fjernbetjening: If the remote control's range decreases or it stops responding, replace the battery (2 A batteries required, not included).

7. Fejlfinding

ProblemMulig årsagLøsning
Lysene tænder ikke.Ingen strømtilslutning.
Fjernbetjeningens batteri er dødt.
IR-modtager blokeret.
Check if the power adapter is securely plugged into the outlet and the strip.
Udskift fjernbetjeningens batterier.
Ensure a clear line of sight between the remote and the IR receiver.
Fjernbetjeningen reagerer ikke.Fjernbetjeningens batteri er dødt.
IR-modtager blokeret.
Fjernbetjeningen er for langt fra modtageren.
Udskift fjernbetjeningens batterier.
Ensure a clear line of sight between the remote and the IR receiver.
Move closer to the IR receiver.
Lysene flimrer.Løs forbindelse.
Defekt strømadapter.
Check all connections between the strip, receiver, and power adapter.
Contact customer support for a replacement power adapter if suspected faulty.
Adhesive is not sticking.Overfladen er snavset eller ujævn.
Utilstrækkeligt tryk under installationen.
Clean the surface thoroughly before re-application. Ensure the surface is smooth and dry.
Apply firm, even pressure along the entire strip during installation. Consider using additional mounting clips for rougher surfaces.

8. Specifikationer

FeatureSpecifikation
ModelnummerPR410098-DWW-US
Længde32.8 fod (10 fod)
Lyskilde600 LEDs (SMD 2835)
FarvetemperaturTunable White (3000K Warm White, 4500K Neutral White, 6000K Cool White)
DæmpbarJa
Voltage24 volt (DC)
Wattage20 watt
Lysstrøm1400 lumen
KontrolmetodeIR fjernbetjening
Klæbende type3M klæbemiddel
Indendørs/Udendørs brugIndendørs
Varens vægt8.1 ounce (0.23 kilo)
Produktdimensioner9.84 x 2.95 x 3.94 tommer (pakket)

9. Garantioplysninger

This Lepro LED Tunable White Strip Light comes with a 2 års garanti from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. It does not cover damage caused by improper installation, misuse, accidents, unauthorized repairs, or modifications.

Gem venligst dit købsbevis for garantikrav.

10. Kundesupport

If you encounter any issues or have questions regarding your Lepro LED Tunable White Strip Light, please contact Lepro customer support. For the most up-to-date contact information, please visit the official Lepro webwebstedet eller se produktemballagen.

Du kan også besøge Lepro-butik på Amazon for mere information og supportressourcer.

Relaterede dokumenter - PR410098-DWW-US

Preview Lepro LED-skrivebord Lamp med Clamp - PR310005-DWW Brugervejledning
Brugervejledning til Lepro LED Desk Lamp med Clamp (Model PR310005-DWW). Lær om dens funktioner, specifikationer, installation og sikker brug. Dette justerbare skrivebordamp tilbyder flere lysstyrkeniveauer og farvetemperaturer, strømforsynes via USB og er designet til indendørs brug.
Preview Lepro S1 Smart LED-stribelys Brugermanual
Omfattende brugermanual til Lepro S1 Smart LED-stribelys (model: 2A3MAS1), der beskriver installation, betjening og funktioner.
Preview Lepro LED-lysstrimmel brugermanual og specifikationer
Brugermanual til Lepro LED-lysstrimler (model PR4100067-serien). Indeholder oplysninger om installation, sikkerhed, specifikationer og bortskaffelse.
Preview Lepro S1 Smart LED-stribelys: Installation, funktioner og sikkerhedsvejledning
Omfattende guide til Lepro S1 Smart LED-stribelyset, der dækker installation, app-tilslutning, integration med stemmestyring, sikkerhedsforanstaltninger, tekniske specifikationer og garantioplysninger.
Preview Installations- og brugervejledning til Lepro R2 Smart LED Downlight
Omfattende guide til installation og brug af Lepro R2 Smart LED Downlight, der dækker app-tilslutning, opsætning af stemmestyring, montering og sikkerhedsoplysninger.
Preview Lepro dæmpbart skrivebord Lamp Brugermanual og sikkerhedsvejledning
Dette dokument indeholder omfattende instruktioner og sikkerhedsforanstaltninger for Lepro Dimmable Desk LampDen indeholder oplysninger om produktspecifikationer, brug, producentoplysninger og miljøoverholdelse.