1. Introduktion
The Lexon MINO S is a compact, portable Bluetooth speaker designed for high-definition sound on the go. Featuring Bluetooth 4.2 connectivity, a built-in hands-free microphone, and selfie control functionality, this speaker offers convenience and quality in a pocket-sized form factor. It also supports True Wireless Stereo (TWS) technology for pairing two speakers.
2. Hvad er der i æsken
- Lexon MINO S Bluetooth Speaker
- USB-C ladekabel
- Brugervejledning (dette dokument)
3. Produktet er slutview
The Lexon MINO S features a minimalist design with a perforated grille on the top for sound output and a single multi-function button for various controls. The USB-C charging port is located on the side.
Billede 3.1: Forside view of the Lexon MINO S Bluetooth Speaker in Red.
Billede 3.2: Top view of the Lexon MINO S Bluetooth Speaker, showing the speaker grille.
4. Opsætning
4.1. Opladning af højttaleren
- Tilslut det medfølgende USB-C-kabel til opladningsporten på højttaleren.
- Connect the other end of the USB-C cable to a compatible USB power source (e.g., computer USB port, wall adapter).
- Opladningsindikatorlampen lyser.
- A full charge takes approximately 1 hour, providing up to 3 hours of playback time.
Image 4.1: The Lexon MINO S speaker being charged via its USB-C port.
4.2. Bluetooth-parring
- Tænd: Press and hold the multi-function button on the speaker until you hear an audible cue or see an indicator light.
- Aktiver Bluetooth: On your smartphone or tablet, navigate to the Bluetooth settings and ensure Bluetooth is enabled.
- Vælg enhed: In the list of available Bluetooth devices, select "Lexon MINO S".
- Bekræftelse: Once successfully paired, you will hear a confirmation sound from the speaker.
Image 4.2: The Lexon MINO S speaker paired with a smartphone for music playback.
4.3. Ægte trådløs stereo (TWS) parring
To enhance your audio experience, two Lexon MINO S speakers can be paired together for True Wireless Stereo sound.
- Ensure both MINO S speakers are fully charged and powered off.
- Power on both speakers simultaneously.
- On one of the speakers, quickly double-press the multi-function button. This speaker will enter TWS pairing mode.
- De to højttalere opretter automatisk forbindelse til hinanden. Du vil høre en hørbar bekræftelse, når TWS-parringen er gennemført.
- Now, connect your smartphone or tablet to the primary speaker (the one you double-pressed the button on) via Bluetooth as described in Section 4.2.
- Lyden afspilles nu i stereo gennem begge højttalere.
5. Betjeningsvejledning
5.1. Tænd/sluk
- Tænd: Tryk og hold multifunktionsknappen nede i cirka 3 sekunder.
- Sluk: Tryk og hold multifunktionsknappen nede i cirka 3 sekunder.
5.2. Musikafspilning
- Afspil/pause: Tryk kort på multifunktionsknappen.
- Volume control is typically managed directly from your connected Bluetooth device.
5.3. Håndfri opkald
When connected to a smartphone, the MINO S can be used for hands-free calls.
- Besvar/afslut opkald: Tryk kort på multifunktionsknappen.
- Afvis opkald: Tryk og hold multifunktionsknappen nede i cirka 2 sekunder.
5.4. Selfie Control
Use the MINO S as a remote shutter for your smartphone camera.
- Ensure the MINO S is paired with your smartphone via Bluetooth.
- Åbn din smartphones kameraapplikation.
- Short press the multi-function button on the MINO S to trigger the camera shutter.
6. Vedligeholdelse
- Rengør højttaleren med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Avoid exposing the speaker to water or excessive moisture, as it is not water-resistant.
- Opbevar højttaleren på et køligt, tørt sted, når den ikke er i brug.
- Forsøg ikke selv at skille højttaleren ad eller reparere den. Kontakt kundesupport for at få hjælp.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Højttaleren tænder ikke. | Lavt batteri. | Oplad højttaleren ved hjælp af det medfølgende USB-C-kabel. |
| Kan ikke parre med Bluetooth-enhed. | Bluetooth is off on your device; speaker is not in pairing mode; device is out of range. | Ensure Bluetooth is enabled on your device. Power cycle the speaker to enter pairing mode. Keep devices within 10 meters (33 feet). |
| Ingen lyd eller dårlig lydkvalitet. | Volume too low; speaker not connected; interference; speaker at maximum volume. | Increase volume on both the speaker and your connected device. Re-establish Bluetooth connection. Move away from sources of interference. Reduce speaker volume slightly if sound is distorted. |
| TWS-parring mislykkes. | Incorrect pairing procedure; speakers too far apart. | Ensure both speakers are powered off before starting TWS pairing. Follow TWS pairing steps precisely. Keep speakers close during pairing. |
8. Specifikationer
- Modelnavn: MINO S
- Varemodelnummer: LA123
- Dimensioner: 2.1 x 2.1 x 0.98 tommer (5.3 x 5.3 x 2.5 cm)
- Varens vægt: 1.44 ounce (41 gram)
- Forbindelse teknologi: Bluetooth, USB
- Bluetooth version: 4.2
- Højttalers maksimale udgangseffekt: 3 watt
- Strømkilde: Ledningsbaseret elektrisk (via USB-C)
- Batteri: 1 litium-ion-batteri (påkrævet)
- Opladningstid: 1 time
- Battery Life (Autonomy): 3 timer
- Særlige funktioner: Hands-free micro, Selfie control, TWS technology
- Vandmodstandsniveau: Ikke vandafvisende
- Inkluderede komponenter: USB-C Cable, User Manual
- Fabrikant: Lexon
9. Garanti og support
The Lexon MINO S Bluetooth Speaker comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or visit the official Lexon webwebsted.
For technical support, troubleshooting assistance, or any other inquiries, please visit the official Lexon support page or contact their customer service department through the contact information provided on their webwebsted.
