ChunHee Wireless Dog Doorbell User Manual

Indledning

Thank you for choosing the ChunHee Wireless Dog Doorbell. This device is designed to assist with pet potty training and can also serve as a versatile doorbell for homes or a paging device for caregivers. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and a positive user experience.

Billede: Overview of the ChunHee Wireless Dog Doorbell system, showing two receivers and two transmitters.

Pakkens indhold

Kontroller venligst, at alle varer er til stede i din pakke:

• Modtager x 2
• Senderen x 3
• Double-sided adhesive stickers x 3
• Brugervejledning x 1
• 12V 23A Battery x 3
• Skruesæt x 1

Produktegenskaber

• Nem aktivering: Dogs can activate the wireless doorbell by lightly touching or sliding on the touch pad with their nose or paw. Suitable for dogs and cats of all sizes.
• Trådløs rækkevidde: Maximum working range of 150 meters (approximately 492 feet) in an open area.
• Melody Options: 52 distinct ringtones available. Users can set any preferred melody as the doorbell chime.
• Justerbar lydstyrke: 5 volume levels (0-110dB), including a unique silent mode.
• LED-indikator: Visual flash indicator for those with hearing impairment.
• Holdbart design: IP55 waterproof and dustproof transmitter, allowing installation near doors. Avoid prolonged submersion in water.
• Alsidig brug: Can be used as a standard doorbell for homes, apartments, offices, and villas, or as a paging device for elderly individuals.

Image: A dog activating the doorbell transmitter, illustrating the easy trigger feature.

Opsætning og installation

Transmitter Installation

The dog doorbell does not require wiring. It can be affixed to a door or wall using the provided 3M double-sided adhesive tape or the screw set.

• Clean the desired installation surface thoroughly to ensure it is free of dust and grease.
• Peel off one side of the 3M double-sided adhesive tape and apply it to the back of the transmitter.
• Peel off the other side of the tape and firmly press the transmitter onto the chosen surface (door, wall, or glass).
• Alternatively, use the screw set to mount the transmitter for a more permanent installation.

Modtager placering

The receiver plugs into a standard electrical outlet and does not require batteries for operation. Place the receiver in a location where the chime can be clearly heard, such as the kitchen or bedroom.

Billede: Eksamples of transmitter installation on a door and glass, and receiver in use.

Betjeningsvejledning

Justering af lydstyrke og melodier

• Lydstyrkekontrol: Press the volume button on the side of the receiver to cycle through 5 volume levels (0-110dB). The silent mode (0dB) will only activate the LED flash.
• Melodivalg: Use the forward/backward buttons on the receiver to browse through the 52 available ringtones.

Pairing Additional Transmitters/Receivers

The system supports adding more receivers or transmitters. Follow these steps to pair new components:

1. Place the transmitter next to the receiver and plug in the receiver.
2. Press and hold both the volume button and the melody selection button simultaneously for 5 seconds until the receiver's indicator light flashes blue rapidly.
3. While the receiver light is flashing, press the button on the transmitter. The receiver will chime, indicating successful pairing.

Billede: Detaljeret view of the receiver's controls for volume, pairing, and melody selection.

Opretholdelse

• Rensning: Wipe the doorbell components with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Battery Replacement (Transmitter): The transmitter uses a 12V 23A alkaline battery. Replace the battery when the signal strength weakens or the transmitter stops functioning. To replace, open the transmitter casing, remove the old battery, and insert a new one, ensuring correct polarity.
• Vandtæthed: The transmitter is IP55 waterproof, meaning it is protected against dust and low-pressure water jets. Do not submerge the transmitter in water for extended periods.

Fejlfinding

• Ingen lyd fra modtageren:
  • Sørg for, at modtageren er korrekt tilsluttet en fungerende stikkontakt.
  • Check if the receiver is in silent mode (0dB). Press the volume button to increase the volume.
  • Kontroller, at senderens batteri ikke er afladet. Udskift det om nødvendigt.
  • Re-pair the transmitter and receiver following the "Pairing Additional Transmitters/Receivers" steps.
• Shortened Transmission Range:
  • Metal objects can interfere with the wireless signal. Avoid placing the transmitter near large metal surfaces.
  • Ensure there are no significant obstructions (thick walls, large appliances) between the transmitter and receiver.
  • Check the transmitter battery. A low battery can reduce range.
• Transmitter Not Activating:
  • Ensure the transmitter battery is correctly installed and not depleted.
  • Confirm the transmitter and receiver are properly paired.
  • Check for physical damage to the transmitter.

Specifikationer

Image: Visual representation of the doorbell's wireless range and IP55 waterproof rating.

Garantioplysninger

ChunHee products are designed for reliability and performance. For specific warranty details, including coverage period and terms, please refer to the warranty card included in your product packaging or visit the official ChunHee webwebsted. Gem venligst din købsbevis i tilfælde af garantikrav.

Kundesupport

If you encounter any issues or have questions regarding your ChunHee Wireless Dog Doorbell that are not addressed in this manual, please contact our customer support team. You can find contact information on the official ChunHee webwebsted eller via din købsplatform.

We are committed to providing excellent service and support for our products.