RC FanJu FJ3530 Digital Alarm Clock User Manual

1. Introduktion

This manual provides detailed instructions for the setup, operation, and maintenance of your RC FanJu FJ3530 Digital Alarm Clock. This device features a large display, dual alarms, indoor temperature monitoring, moon phase display, and a multi-language calendar, designed for clear readability and ease of use.

2. Produktfunktioner

• Large display for easy readability from any angle.
• Dobbelte alarmer med snooze-funktion.
• Indoor temperature display in Celsius (°C) or Fahrenheit (°F).
• 7-language calendar.
• 12/24 timers tidsformat.
• Visning af månefaser.
• Timer funktion.
• Battery-operated for flexible placement (requires 2 AA batteries, not included).
• DCF automatic time setting (applicable to Germany only; manual setting required for other regions).

3. Produktet er slutview

3.1 Frontdisplay

The large LCD screen displays time, date, day of the week, moon phase, and indoor temperature. Icons indicate active alarms, DCF signal reception, and battery status.

Figur 1: Forside view of the RC FanJu FJ3530 Digital Alarm Clock.

3.2 Back Panel and Buttons

The back of the clock houses the battery compartment and control buttons for setting various functions.

Figure 2: Back panel with control buttons.

• SÆT: Enters and confirms settings.
• ALARM SÆT: Views and sets alarm times.
• ALARM TIL / FRA: Activates or deactivates alarms.
• SNOOZE: Aktiverer snooze-funktionen, når alarmen lyder.
• OP NED: Justerer værdier under indstilling.
• °C/°F: Toggles temperature unit between Celsius and Fahrenheit.
• BØLGE: Controls DCF radio signal reception.

4. Opsætning

4.1 Batteriinstallation

1. Åbn batteridækslet på bagsiden af ​​uret.
2. Insert two AA batteries (not included) according to the polarity indicators (+/-).
3. Luk batterirummets dæksel forsvarligt.

4.2 Initial Power-On and DCF Signal

Upon battery installation, the clock will power on. If you are in Germany, the clock will automatically attempt to receive the DCF radio signal for time synchronization. This process may take several minutes. A signal icon will flash during reception and become solid upon successful synchronization.

If you are outside Germany or prefer manual time setting, you must disable the DCF function.

4.3 Disabling DCF (Outside Germany)

To disable the DCF function, press and hold the 'WAVE' button until the DCF signal icon disappears from the display. This allows for manual time and date setting.

5. Betjeningsvejledning

5.1 Indstilling af tid og dato

1. Press and hold the 'SET' button for approximately 3 seconds to enter time setting mode. The hour digit will flash.
2. Use the 'UP' or 'DOWN' buttons to adjust the hour.
3. Press 'SET' to confirm the hour and move to setting the minutes.
4. Repeat steps 2 and 3 for minutes, year, month, day, and 12/24 hour format.
5. Tryk på 'SET' igen for at afslutte indstillingstilstanden.

5.2 Indstilling af alarmer

The clock features two independent alarms (Alarm 1 and Alarm 2).

1. Press the 'ALARM SET' button briefly to view Alarm 1 time. Press it again to view Alarm 2 gang.
2. Mens viewing the desired alarm time (e.g., Alarm 1), press and hold 'ALARM SET' for 3 seconds to enter alarm setting mode. The alarm hour digit will flash.
3. Use the 'UP' or 'DOWN' buttons to adjust the alarm hour.
4. Press 'ALARM SET' to confirm the hour and move to setting the alarm minutes.
5. Repeat steps 3 and 4 for alarm minutes.
6. Press 'ALARM SET' again to exit alarm setting mode.

5.3 Aktivering/deaktivering af alarmer

After setting an alarm, press the 'ALARM ON/OFF' button briefly to toggle the alarm on or off. An alarm icon (e.g., bell symbol) will appear on the display when the alarm is active.

5.4 Snooze -funktion

When an alarm sounds, press the 'SNOOZE' button to temporarily silence the alarm. The alarm will sound again after approximately 5-10 minutes. To stop the alarm completely, press any other button.

5.5 Valg af temperaturenhed

Press the '°C/°F' button to switch the indoor temperature display between Celsius and Fahrenheit.

5.6 Månefasevisning

The moon phase is automatically calculated and displayed based on the set date. No manual adjustment is required for this feature.

5.7 Timer funktion

The product description indicates a timer function. For specific instructions on how to operate the timer, please refer to the detailed product manual provided with your purchase, as specific button sequences are not available here.

6. Vedligeholdelse

6.1 Rengøring

Wipe the clock surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the display or casing.

6.2 Udskiftning af batteri

When the display dims or functions become erratic, it is time to replace the batteries. Open the battery compartment, remove the old batteries, and insert two new AA batteries, ensuring correct polarity. Dispose of old batteries responsibly.

7. Fejlfinding

• Intet display / Mørkt display:
  Check battery installation. Ensure batteries are inserted with correct polarity. Replace batteries if they are old or depleted.
• Forkert tidspunkt:
  If in Germany, ensure the DCF function is enabled and the clock is in a location with good signal reception. If outside Germany, ensure the DCF function is disabled and manually set the time and date as per section 5.1.
• Alarmen lyder ikke:
  Verify that the alarm is activated (check for the alarm icon on the display). Ensure the alarm time is set correctly.
• DCF Synchronization Failure:
  Move the clock to a different location, preferably near a window and away from electronic devices that may cause interference. If persistent, disable DCF and set the time manually.

8. Specifikationer

9. Garanti og support

For product support, warranty information, or service inquiries, please contact the retailer from whom you purchased the RC FanJu FJ3530 Digital Alarm Clock. Keep your purchase receipt as proof of purchase for any warranty claims.