Eogifee UC7083T loftsventilator fjernbetjening brugsanvisning

Indledning

This manual provides detailed instructions for the installation, operation, and maintenance of your Eogifee UC7083T Ceiling Fan Remote Control. This remote is designed as a replacement for original Hampton Bay UC7083T remotes and is compatible with various Hampton Bay and Harbor Breeze ceiling fans that utilize a receiver with matching dip switches. Please read this manual thoroughly before use to ensure proper function and safety.

Sikkerhedsoplysninger

• Ensure the ceiling fan's power is turned off at the circuit breaker before any installation or maintenance.
• This remote control is a transmitter only. It requires an existing compatible receiver within your ceiling fan.
• Do not expose the remote control to water or excessive moisture.
• Opbevar batterier utilgængeligt for børn.
• Bortskaf brugte batterier ansvarligt i henhold til lokale regler.

Pakkens indhold

• 1 x Eogifee UC7083T Remote Control Transmitter
• 1 x vægbeslag
• 2 x monteringsskruer

Note: A 12V "A23" battery is required and is not included in this package. This package does not include a receiver.

Image: The Eogifee UC7083T remote control, its retail packaging, the wall mount bracket, and two mounting screws.

Produkt overview

Gør dig bekendt med knapperne og funktionerne på din fjernbetjening.

Billede: Forside view of the Eogifee UC7083T remote control, showing the fan speed buttons (HI, MED, LOW), light control button, and OFF button.

• Lys knap: Controls the ceiling fan light. Press to turn on/off. For incandescent bulbs, press and hold to dim.
• HI Button: Indstiller ventilatorhastigheden til Høj.
• MED Button: Indstiller ventilatorhastigheden til medium.
• LOW Button: Indstiller ventilatorhastigheden til Lav.
• OFF knap: Turns the ceiling fan off.
• Indikatorlys: Illuminates when a button is pressed. If it stays on, the battery may be low.

Opsætning

1. Batteriinstallation

1. Find batterirummets dæksel på bagsiden af ​​fjernbetjeningen.
2. Press firmly below the arrow on the cover and slide it off.
3. Insert one 12V "A23" battery, ensuring correct polarity (+/-).
4. Sæt batterirummets dæksel på igen.

Image: The back of the remote control with the battery compartment open, revealing the slot for a 12V "A23" battery and the four dip switches.

2. Setting the Dip Switches

The remote control and your ceiling fan's receiver must have matching dip switch settings to communicate. There are 16 possible code combinations.

1. Identify Receiver Dip Switches: Locate the dip switches on your ceiling fan's receiver. This is typically found within the fan's canopy or motor housing. Note the current ON/OFF (or UP/DOWN) positions of these switches.
2. Access Remote Dip Switches: With the battery cover removed from your Eogifee UC7083T remote, you will see four small switches (numbered 1-4) inside the battery compartment.
3. Matchindstillinger: Using a small screwdriver or a pen, slide the dip switches on the remote control to match the exact ON/OFF (or UP/DOWN) positions of the dip switches on your ceiling fan's receiver. All four switches must match.
4. Sæt batteridækslet på fjernbetjeningen på plads.

Vigtig bemærkning: Before setting the code, ensure your fan is operated in "HIGH speed" and the light is in the "ON" condition at the switch knob (if applicable) for optimal setup.

Image: The retail packaging for the Eogifee UC7083T remote control, displaying detailed instructions for setting the dip switches on both the transmitter and receiver.

3. Vægmontering

The included wall mount bracket allows for convenient storage of your remote control.

1. Vælg et passende sted på en væg, væk fra direkte sollys eller varmekilder.
2. Use the wall mount bracket as a template to mark the positions for the two mounting screws.
3. Bor pilothuller om nødvendigt.
4. Fastgør vægbeslaget til væggen med de medfølgende skruer.
5. Slide the remote control into the mounted bracket.

Image: The Eogifee UC7083T remote control shown alongside its wall mount bracket, illustrating how the remote fits into the bracket.

Betjeningsvejledning

Once the dip switches are matched and the battery is installed, your remote is ready for use.

• Blæserhastighedskontrol:
  • Trykke HI for high fan speed.
  • Trykke MED til medium ventilatorhastighed.
  • Trykke LAV for low fan speed.
  • Trykke SLUKKET for at slukke for blæseren.
• Lysstyring:
  • Tryk på Lys knap to toggle the light on or off.
  • If using incandescent bulbs, press and hold the Lys knap to dim or brighten the light. Release when the desired brightness is reached.
  • Note: If using LED bulbs, the light button will typically only control on/off functionality and may not support dimming, depending on the LED bulb and fan receiver capabilities.

Image: A hand holding the Eogifee UC7083T remote control, with a ceiling fan and its lights visible in the background, illustrating the remote in active use.

Fejlfinding

Specifikationer

• Model: UC7083T
• Mærke: Eogifee
• Strømkilde: 1 x 12V "A23" battery (not included)
• Dimensioner: Cirka 4 x 2 x 0.01 tommer (10.16 x 5.08 x 0.025 cm)
• Vægt: Cirka 3.2 ounce (90.7 gram)
• Kompatibilitet: Hampton Bay and Harbor Breeze ceiling fans with UC7083T compatible receivers.
• Funktioner: 3-speed fan control (High, Medium, Low), Light On/Off, Light Dimming (for incandescent bulbs).

Opretholdelse

• Rengør fjernbetjeningen med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Hvis fjernbetjeningen ikke skal bruges i længere tid, skal du fjerne batteriet for at forhindre lækage.
• Replace the battery when the indicator light stays on or when the remote's range decreases.

Garanti og support

For warranty information or technical support, please refer to the seller's contact information or visit the Eogifee store on Amazon. Keep your purchase receipt for warranty claims.

Eogifee Store: Visit the Eogifee Store on Amazon