1. Introduktion
This manual provides essential information for the safe and effective operation, setup, and maintenance of your Einhell Power X-Change 89mm Cordless Mini Circular Saw TE-CS 18/89 Li Solo. Please read these instructions carefully before using the tool and keep them for future reference. This cordless mini circular saw is designed for making straight cuts in wood, panels, parquet, and various other materials.
Figure 1: The Einhell Power X-Change 89mm Cordless Mini Circular Saw. The tool features a red and black ergonomic handle, a grey base plate, and an exposed saw blade. A slot for a Power X-Change battery is visible at the top. The saw is accompanied by two saw blades and a rip fence accessory.
2. Sikkerhedsinstruktioner
Always observe basic safety precautions when using power tools to reduce the risk of fire, electric shock, and personal injury. Familiarize yourself with all safety warnings and instructions.
Generelle sikkerhedsadvarsler for elværktøj:
- Sikkerhed på arbejdsområdet: Hold dit arbejdsområde rent og godt oplyst. Rodede eller mørke områder indbyder til ulykker. Brug ikke elværktøj i eksplosive atmosfærer, f.eks. i nærheden af brandfarlige væsker, gasser eller støv.
- Elektrisk sikkerhed: Undgå kropskontakt med jordede eller jordede overflader såsom rør, radiatorer, komfurer og køleskabe. Der er en øget risiko for elektrisk stød, hvis din krop er jordet eller jordet.
- Personlig sikkerhed: Always wear eye protection. Use safety equipment such as dust masks, non-skid safety shoes, hard hats, or hearing protection when appropriate. Stay alert, watch what you are doing, and use common sense when operating a power tool.
- Brug og pleje af værktøj: Tving ikke elværktøjet. Brug det korrekte elværktøj til dit formål. Det vil udføre arbejdet bedre og mere sikkert med den hastighed, det er designet til. Frakobl batteriet fra elværktøjet, før du foretager justeringer, skifter tilbehør eller opbevarer elværktøj.
- Service: Få dit elværktøj efterset af en kvalificeret reparatør, der kun bruger identiske reservedele. Dette vil sikre, at elværktøjets sikkerhed opretholdes.
3. Pakkens indhold
Upon unpacking, please ensure all items are present and undamaged. If any parts are missing or damaged, contact your retailer.
- Einhell Power X-Change 89mm Cordless Mini Circular Saw TE-CS 18/89 Li Solo
- Carbide Saw Blade (89mm diameter)
- Riv hegn
- Støvsuger adapter
- Instruktionsmanual
Note: Battery and charger are not included and must be purchased separately as part of the Einhell Power X-Change series.
4. Produktet er slutview og komponenter
Familiarize yourself with the various parts of your mini circular saw:
- Handle/Motor Housing: Ergonomic grip for control and houses the motor.
- Batterigrænseflade: Slot for Einhell Power X-Change 18V battery.
- Savblad: 89mm diameter carbide blade for cutting.
- Base Plate (Aluminum Saw Table): Provides stability and guides the saw during cuts.
- Justering af skæredybde: Mechanism to set the desired cutting depth.
- Spindellås: Button to lock the spindle for easy blade changes.
- Rip Fence Guide: Slot for attaching the rip fence for parallel cuts.
- Vacuum Cleaner Adapter Port: Connection point for a dust extraction system.
5. Opsætning
5.1. Batteriinstallation
- Sørg for, at batteriet er fuldt opladet før brug.
- Align the battery pack with the battery interface on the saw.
- Slide the battery into the interface until it clicks securely into place.
- For at fjerne det skal du trykke på udløserknappen på batteriet og skubbe det ud.
5.2. Saw Blade Installation/Change
Always disconnect the battery before changing the saw blade.
- Tryk og hold spindellåseknappen nede for at forhindre klingen i at rotere.
- Use the provided wrench (if applicable) to loosen the blade retaining screw.
- Remove the old blade and ensure the new blade is clean and undamaged.
- Place the new 89mm carbide saw blade onto the spindle, ensuring the rotation direction arrows on the blade match the direction arrow on the saw's housing.
- Securely tighten the blade retaining screw while holding the spindle lock. Do not overtighten.
5.3. Attaching the Rip Fence
The rip fence assists in making straight, parallel cuts.
- Slide the rip fence into the guide slot on the base plate.
- Adjust the fence to the desired cutting width.
- Tighten the locking screw to secure the rip fence in position.
5.4. Connecting the Vacuum Adapter
For a cleaner work environment, connect a vacuum cleaner to the adapter port.
- Attach the vacuum cleaner adapter to the dust extraction port on the saw.
- Tilslut en passende støvsugerslange til adapteren.
6. Betjening
6.1. Justering af skæredybde
The cutting depth can be adjusted easily and without tools.
- Loosen the depth adjustment lever/knob.
- Move the base plate up or down to achieve the desired cutting depth. The maximum cutting depth is 28mm.
- Securely tighten the depth adjustment lever/knob to lock the setting.
6.2. At lave et snit
Sørg altid for, at emnet er sikkert fastgjortampog stabil før skæring.
- Set the desired cutting depth and attach the rip fence if needed.
- Position the saw on the workpiece, ensuring the blade is clear of the material before starting.
- Press the ON/OFF switch to start the saw. Allow the blade to reach full speed before engaging the material.
- Før saven jævnt og stabilt gennem materialet. Tving ikke værktøjet.
- Once the cut is complete, release the ON/OFF switch and wait for the blade to stop completely before lifting the saw from the workpiece.
7. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer optimal ydeevne og forlænger levetiden på dit værktøj.
- Rensning: After each use, clean the tool housing, base plate, and blade guard with a soft, damp cloth. Remove any sawdust or debris from the ventilation slots. Do not use harsh chemicals or abrasive cleaners.
- Bladinspektion: Regularly inspect the saw blade for sharpness, damage, or missing teeth. Replace dull or damaged blades immediately to ensure clean cuts and prevent strain on the motor.
- Batteripleje: Opbevar batterier et køligt og tørt sted. Udsæt dem ikke for ekstreme temperaturer.
- Generel inspektion: Kontrollér alle skruer og fastgørelseselementer med jævne mellemrum for at sikre, at de er spændte.
8. Fejlfinding
Dette afsnit omhandler almindelige problemer, du kan støde på.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Saven starter ikke | Batteriet er ikke isat korrekt eller afladet. | Sørg for, at batteriet er helt isat og opladet. |
| Poor cutting performance / Rough cuts | Dull or damaged saw blade. Incorrect cutting depth. | Replace saw blade. Adjust cutting depth appropriately for the material. |
| Saven stopper under drift | Overload or battery discharged. | Reduce cutting pressure. Recharge or replace battery. |
| Depth adjuster becomes loose | Locking mechanism not fully tightened. | Ensure the depth adjustment lever/knob is securely tightened after setting the depth. |
9. Specifikationer
- Model: TE-CS 18/89 Li Solo
- Voltage: 18V (Power X-Change system)
- Savblads diameter: 89 mm
- Maks. Skæredybde: 28 mm
- Saw Table Material: Høj kvalitet aluminium
10. Garanti og support
Einhell products are manufactured to high-quality standards and undergo strict quality controls. This product is covered by a manufacturer's warranty. For specific warranty terms, conditions, and duration, please refer to the warranty card included with your purchase or visit the official Einhell webwebsted.
For technical support, spare parts, or service inquiries, please contact your authorized Einhell dealer or the Einhell customer service department. Contact information can typically be found on the Einhell webwebstedet eller i din produktdokumentation.
