Indledning
This manual provides instructions for the Quntis GL-TYZ-L203 360° Projection Alarm Clock Radio. Please read this manual thoroughly before operating the device to ensure proper use and to understand all features.
Image: The Quntis GL-TYZ-L203 Projection Alarm Clock Radio, displaying the time and projecting it onto a surface.
Pakkens indhold
- Quntis GL-TYZ-L203 Projection Alarm Clock Radio
- USB strømkabel
- Brugermanual
- CR2032 Battery (pre-installed for memory backup)
Image: The alarm clock, its USB power cable, and the user manual, illustrating the items included in the package.
Opsætning
1. Strømtilslutning
Connect the provided USB power cable to the clock and plug the other end into a 5V/1A USB power adapter (not included). The clock requires AC power for all functions to operate.
2. Batteribackup
A CR2032 battery is pre-installed for memory backup. This battery preserves time and alarm settings during a power outage. It does not power the clock's display or functions.
Betjeningsvejledning
1. Indstilling af tid og dato
- Tryk og hold på SÆT knappen for at gå ind i tidsindstillingstilstand.
- Brug VOL+ og VOL- knapperne for at justere timetallet. Tryk på SÆT for at bekræfte.
- Gentag i minutter.
- Select 12-hour or 24-hour format using VOL+/VOL-. Trykke SÆT for at bekræfte.
2. Setting Alarms (Alarm 1 & Alarm 2)
Image: A visual representation of setting two separate alarms and utilizing the snooze feature.
- Tryk og hold på ALARM 1 or ALARM 2 knappen for at gå ind i alarmindstillingstilstand.
- Bruge VOL+/VOL- to adjust the alarm hour. Press the respective alarm button to confirm.
- Repeat for alarm minutes.
- Select alarm sound: "BiBi" (beep) or FM Radio. Use VOL+/VOL- to choose. Press the alarm button to confirm.
- Adjust alarm volume (Level 1-15) using VOL+/VOL-. Press the alarm button to confirm.
- For at aktivere/deaktivere en alarm skal du trykke på ALARM 1 or ALARM 2 button briefly. An alarm icon will appear/disappear on the display.
Snooze funktion
Når en alarm lyder, skal du trykke på SLUM button to activate snooze. The alarm will sound again after 5-60 minutes (adjustable). To turn off the alarm completely, press any other button except SLUM.
3. Projection Feature
Image: The alarm clock projecting time onto a wall, demonstrating the 180° projection angle adjustment and 360° rotatable projection for optimal viewing.
- Aktiver/deaktiver: Tryk på FREMSKRIVNING knappen for at tænde eller slukke for projektionen.
- Justering af lysstyrke: Tryk på FREMSKRIVNING button repeatedly to cycle through two brightness levels (soft light, bright light) or turn off the projection.
- Vinkeljustering: The projector arm can be rotated 180 degrees manually to direct the time onto a wall or ceiling.
- Time Orientation: The projected time can be rotated 360 degrees by adjusting the lens on the projector arm to ensure correct orientation.
Image: Comparison of soft light and bright light projection, along with three levels of display brightness (low, medium, bright).
4. Justering af displayets lysstyrke
Tryk på DIMMER button (often labeled with a sun icon) repeatedly to cycle through 3 levels of display brightness (low, medium, bright) to suit your preference.
5. FM Radio
Image: Icons representing FM radio frequency range (87.5-108 MHz), 15 preset radio memories, 5-90 minute sleep timer, and 15-level adjustable volume.
- Tænd/sluk: Tryk på RADIO/SLEEP button briefly to turn the FM radio on or off.
- Automatisk scanning: Tryk og hold på VOL+ og VOL- buttons simultaneously to automatically scan and save available FM stations. The clock can store up to 15 stations.
- Manuel indstilling: Brug VOL+/VOL- buttons to manually tune to a specific frequency.
- Lydstyrkejustering: Brug VOL+/VOL- buttons to adjust the radio volume (Level 0-15).
- Sleep timer: Når radioen er tændt, skal du trykke på RADIO/SLEEP button repeatedly to set a sleep timer (e.g., 5, 10, 15... 90 minutes). The radio will automatically turn off after the set time.
6. USB -opladningsport
A 5V/1.2A USB output port is located on the back of the clock. This port can be used to charge smartphones or other USB-powered devices.
Opretholdelse
- Rengør uret med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Hold enheden væk fra vand og høj luftfugtighed.
- Avoid placing the clock in direct sunlight or near heat sources.
- Sørg for korrekt ventilation omkring enheden.
Fejlfinding
- No Display/Functions: Ensure the USB power cable is securely connected to a working power adapter and outlet. The backup battery only saves settings, it does not power the display.
- Projection Unclear: Adjust the focus by rotating the lens on the projector arm. Ensure the projection distance is within 1-3 meters (3.3-10 feet) for optimal clarity.
- Alarmen lyder ikke: Verify that the alarm is activated (alarm icon visible on display) and the volume is not set to 0.
- Dårlig radiomodtagelse: Extend the FM antenna fully. Try repositioning the clock to improve signal reception.
- Time/Settings Lost After Power Outage: Check if the CR2032 backup battery is correctly installed and has sufficient charge.
Specifikationer
| Mærke | Quntis |
| Modelnummer | GL-TYZ-L203 |
| Display Type | Digital LED |
| Strømkilde | Corded Electric (USB 5V/1A adapter required, not included) |
| Backup batteri | CR2032 (for memory backup only) |
| FM-radiofrekvens | 87.5 - 108 MHz |
| USB-opladningsudgang | 5V/1.2A |
| Projektionsafstand | 1 - 3 meter (3.3 - 10 fod) |
| Produktdimensioner | 17 x 0.03 x 8 cm (ca. 6.7 x 0.01 x 3.1 tommer) |
| Vægt | 227 g (ca. 0.5 lbs) |
Supportinformation
For any questions or assistance with your Quntis GL-TYZ-L203 Projection Alarm Clock Radio, please contact Quntis customer service. We aim to respond to inquiries within 12 hours.
Refer to the official Quntis store for further information: Quntis Store
