Einhell TE-OS 18/150 Li-Solo Power X-Change batteridrevet multisliber brugsanvisning

1. Introduktion

This instruction manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your Einhell TE-OS 18/150 Li-Solo Power X-Change Cordless Multi-Sander. Please read this manual thoroughly before using the tool and keep it for future reference. This product is part of the Einhell Power X-Change family, meaning it operates with any 18V Power X-Change battery.

Figure 1: Einhell TE-OS 18/150 Li-Solo Cordless Multi-Sander with included abrasive sheets.

2. Generelle sikkerhedsinstruktioner

Always observe the following safety precautions when operating power tools to prevent electric shock, fire, and serious injury.

• Sikkerhed på arbejdsområdet: Hold dit arbejdsområde rent og godt oplyst. Rodede eller mørke områder indbyder til ulykker. Brug ikke elværktøj i eksplosive atmosfærer, f.eks. i nærheden af ​​brandfarlige væsker, gasser eller støv.
• Elektrisk sikkerhed: Undgå kropskontakt med jordforbundne overflader. Udsæt ikke elværktøj for regn eller våde forhold.
• Personlig sikkerhed: Always wear eye protection. Use hearing protection when operating for extended periods. Wear a dust mask in dusty conditions. Dress properly; avoid loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts.
• Brug og pleje af værktøj: Tving ikke elværktøjet. Brug det korrekte elværktøj til din opgave. Frakobl batteriet fra elværktøjet, før du foretager justeringer, skifter tilbehør eller opbevarer elværktøj. Opbevar elværktøj, der ikke er i brug, utilgængeligt for børn, og lad ikke personer, der ikke er bekendt med elværktøjet eller disse instruktioner, betjene elværktøjet.
• Brug og vedligeholdelse af batteriværktøj: Genoplad kun med den oplader, der er angivet af producenten. Brug kun elværktøj med specifikt beregnede batteripakker.

3. Produktkomponenter

The Einhell TE-OS 18/150 Li-Solo multi-sander includes the following components:

• Cordless Multi-Sander Unit
• Dust Collection Box (with filter)
• Adapter for External Dust Extraction
• 6 Abrasive Sheets (3x P120, 3x P240)

Note: This product is supplied without a battery or charger. These are sold separately as part of the Power X-Change system.

Figure 2: Key features of the multi-sander, including Softgrip, dust extraction, delta sanding shoe, and large oscillating motion.

Figure 3: The Einhell TE-OS 18/150 Li-Solo is sold without a battery or charger.

4. Opsætning

4.1 Batteriinstallation

1. Ensure the sander's power switch is in the 'OFF' position.
2. Slide a charged 18V Power X-Change battery pack into the battery receptacle on the rear of the sander until it clicks securely into place.
3. For at fjerne batteriet skal du trykke på udløserknappen på batteripakken og skubbe den ud.

4.2 Påsætning af slibepapir

The sander features an 'Extreme Fix' hook-and-loop fastening system for quick and secure abrasive paper changes.

1. Ensure the sander is switched off and the battery is removed.
2. Align the holes on the abrasive sheet with the holes on the sanding plate.
3. Press the abrasive sheet firmly onto the hook-and-loop surface of the sanding plate to secure it.
4. To remove, simply peel the abrasive sheet off the sanding plate.

Figure 4: Attaching abrasive paper using the hook-and-loop system.

Figure 5: The sander comes with 6 abrasive sheets (3x P120, 3x P240).

4.3 Støvudsugning

The sander offers two options for dust extraction:

• Integrated Dust Collection Box: Attach the provided dust collection box to the designated port on the sander. This is suitable for most light to medium sanding tasks.
• External Dust Extraction: For prolonged use or when working with fine dust, attach the vacuum adapter to the dust extraction port and connect it to a suitable workshop vacuum cleaner.

Figure 6: Options for dust extraction: integrated dust collector or external vacuum connection.

5. Betjeningsvejledning

5.1 Tænd/sluk

1. Ensure a charged battery is installed and abrasive paper is securely attached.
2. To start the sander, push the ON/OFF switch to the 'I' (ON) position.
3. To stop the sander, push the ON/OFF switch to the 'O' (OFF) position.

5.2 Slibeteknikker

• Hold the sander firmly with one hand using the Softgrip surface.
• Place the sanding plate flat on the workpiece before switching the tool on.
• Apply light, even pressure. Do not press too hard, as this can reduce sanding efficiency and damage the workpiece or tool.
• Bevæg sliberen i glatte, overlappende strøg hen over overfladen.
• The delta-shaped sanding plate is ideal for sanding corners, edges, and smaller, intricate areas.
• Always switch off the sander and allow it to come to a complete stop before lifting it from the workpiece.

Figure 7: Demonstrating the use of the multi-sander for detailed work on a window frame.

Figure 8: The compact design allows for optimal handling and one-handed control.

5.3 Battery Runtime (No Load)

The approximate maximum running time per battery charge (no load) for various Power X-Change battery capacities is as follows:

• 2.0 AH: 27 minutes
• 2.5 AH: 34 minutes
• 3.0 AH: 40 minutes
• 4.0 AH: 55 minutes
• 5.2 AH: 70 minutes
• 8.0 AH: 110 minutes

Figure 9: Battery runtime chart for various Power X-Change battery capacities.

6. Vedligeholdelse

6.1 Cleaning the Dust Collection Box

1. Regularly empty the dust collection box to maintain optimal dust extraction performance.
2. Fjern støvboksen fra slibemaskinen.
3. Open the dust box and dispose of the collected dust.
4. Clean the filter inside the dust box by tapping it or using compressed air.
5. Reattach the dust box securely to the sander.

6.2 Generel rengøring og inspektion

• Always remove the battery before any cleaning or maintenance.
• Hold ventilationsåbningerne rene for at forhindre overophedning. Brug en blød børste eller trykluft.
• Tør værktøjshuset af med en blød, damp klæde. Brug ikke skrappe rengøringsmidler eller opløsningsmidler.
• Regularly inspect the sanding plate for wear or damage. Replace if necessary.
• Check the power switch for proper function.

7. Fejlfinding

If you encounter issues with your multi-sander, refer to the following common troubleshooting steps:

Hvis problemet fortsætter efter at have forsøgt disse løsninger, bedes du kontakte Einhells kundesupport.

8. Specifikationer

9. Garanti og support

For garantioplysninger, produktregistrering eller teknisk support henvises til den officielle Einhell-brugervejledning. website or contact your local Einhell service center. Keep your proof of purchase for any warranty claims.

Der blev ikke fundet nogen officielle produktvideoer fra sælgeren til indlejring i denne manual.