KING K901-B Hoot WiFi-linjevolumentage Smart Programmerbar Termostat Brugermanual

Indledning

This manual provides detailed instructions for the installation, operation, and maintenance of your KING K901-B Hoot WiFi Line Voltage Smart Programmable Thermostat. This device is designed to provide precise temperature control for electric heating systems, including baseboard, fan-forced, and radiant electric heaters, with the added convenience of WiFi connectivity for remote management.

Læs venligst denne manual grundigt inden installation og brug for at sikre korrekt funktion og sikkerhed.

Sikkerhedsoplysninger

• Installation must be performed by a qualified electrician in accordance with local and national electrical codes.
• Always turn off power at the circuit breaker before installing or servicing the thermostat.
• This thermostat is designed for line voltage electric heating systems (120V/208V/240V, Single Pole, 3-Wire). Do not use with low voltage systems (e.g., furnaces, central air conditioners).
• Sørg for, at alle ledningsforbindelser er sikre for at forhindre elektriske farer.
• Udsæt ikke termostaten for vand eller for meget fugt.

Pakkens indhold

• KING K901-B Hoot WiFi Thermostat
• Monteringsskruer
• Trådmøtrikker
• Brugervejledning (dette dokument)

Installation

Nødvendige værktøjer:

• Skruetrækker (Phillips og Flathead)
• Trådstrippere
• Voltage tester

Wiring Instructions (Single Pole, 3-Wire):

1. Sluk for strømmen: Locate the circuit breaker controlling your heating system and turn it OFF. Verify power is off using a voltage tester.
2. Fjern gammel termostat: Carefully remove your existing thermostat from the wall. Disconnect the wires, noting their connections.
3. Identificér ledninger: For a single pole, 3-wire installation, you will typically have two line wires (L1, L2 from the power source) and one load wire (to the heater). Consult your existing thermostat's wiring or a qualified electrician if unsure.
4. Connect New Thermostat:
   • Connect the two line wires (L1, L2) from the power source to the thermostat's designated line terminals.
   • Connect the load wire to the thermostat's designated load terminal.
   • Ensure all connections are secure using wire nuts.
5. Monter termostat: Secure the thermostat to the wall using the provided mounting screws.
6. Gendan strøm: Tænd for strømmen igen ved afbryderen.

Note: Incorrect wiring can damage the thermostat or heating system and pose a fire hazard. If you are not comfortable with electrical wiring, please consult a licensed electrician.

Image: The KING K901-B Hoot WiFi Thermostat display, showing the current temperature and set point, alongside the Hoot logo and icons for downloading the app from the App Store and Google Play.

Setup: Hoot Smart Phone App & WiFi Connection

The Hoot thermostat connects to your home WiFi network (2.4GHz only) to enable remote control and programming via the Hoot smartphone app.

1. Download appen: Søg efter "Hoot Smart Comfort Control" in the Apple App Store or Google Play Store and install it on your smartphone.
2. Opret en konto: Open the Hoot app and follow the on-screen instructions to create a new user account or log in if you already have one.
3. Tilføj enhed: I appen skal du vælge muligheden for at tilføje en ny enhed.
4. Thermostat Pairing Mode: On the thermostat, follow the instructions to put it into WiFi pairing mode. This usually involves holding a specific button or navigating through a menu. The thermostat display will indicate when it's ready to connect.
5. Opret forbindelse til WiFi: In the Hoot app, select your 2.4GHz home WiFi network and enter the password. The app will guide you through the connection process.
6. Bekræftelse: Once connected, the thermostat display will show a WiFi icon, and the app will confirm successful pairing.

Vigtig: The Hoot thermostat only supports 2.4GHz WiFi networks. If you have a dual-band router, ensure your phone is connected to the 2.4GHz band during the setup process.

Betjeningsvejledning

Manual Operation (Touchscreen):

• Justering af temperatur: Brug op (^) og ned (v) arrows on the touchscreen to increase or decrease the set temperature.
• Tænd/sluk: Tryk på tænd / sluk-knappen (⏻) to turn the heating system on or off.
• Valg af tilstand: The thermostat may offer different modes (e.g., Heat, Off). Refer to the on-screen icons for selection.
• Planoverstyring: Manually adjusting the temperature will temporarily override any active schedule. The override duration can often be set or will revert at the next scheduled event.

App Operation (Hoot Smart Comfort Control):

• Fjernbetjening af temperatur: Adjust the temperature from anywhere using the Hoot app on your smartphone.
• Programplaner:
  • Create custom heating schedules with up to 4 or 6 time periods per day for maximum flexibility.
  • Set different schedules for weekdays and weekends, or customize each day individually.
• Hold funktion: Use the "Hold" feature to maintain a specific temperature indefinitely, overriding the schedule until manually released.
• Ferietilstand: Set a specific temperature for an extended period when you are away, saving energy.
• User Defined Max Temperature Lock: Set a maximum temperature limit to prevent overheating or unauthorized adjustments.

Opretholdelse

• Rensning: Gently wipe the thermostat screen and body with a soft, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Firmwareopdateringer: The thermostat supports Over-The-Air (OTA) firmware upgrades. The Hoot app will notify you if an update is available. Follow the app's instructions to ensure your thermostat has the latest features and improvements.
• Battery (if applicable): Denne linje voltage thermostat does not typically require batteries for operation, as it draws power directly from the heating circuit.

Fejlfinding

• Thermostat Not Powering On:
  • Check the circuit breaker and ensure it is ON.
  • Kontroller, at alle ledningsforbindelser er sikre og korrekte.
• Ingen varmeeffekt:
  • Ensure the thermostat is set to a temperature higher than the current room temperature.
  • Check if the thermostat is in "Off" mode or "Vacation" mode.
  • Verify the heating system itself is functioning correctly.
• Problemer med WiFi-forbindelse:
  • Confirm your router is broadcasting a 2.4GHz network.
  • Ensure your smartphone is connected to the 2.4GHz network during setup.
  • Move the thermostat closer to the WiFi router if possible, or consider a WiFi extender.
  • Restart your router and the thermostat (by cycling power at the breaker).
  • Re-attempt the WiFi pairing process through the Hoot app.
• Unøjagtige temperaturmålinger:
  • Sørg for, at termostaten ikke udsættes for direkte sollys, træk eller varmekilder (f.eks.amps, apparater), der kan påvirke dens sensor.
  • The thermostat uses an electronic thermistor for accurate control (±1°F).
• Touchskærm reagerer ikke:
  • Try cycling power to the thermostat at the circuit breaker to reset it.

Specifikationer

Garanti og support

For warranty information and technical support, please refer to the official KING website or contact KING customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Fabrikant: King Electric

Webwebsted: www.king-electric.com (Eksamplinket, det faktiske link kan variere)