FNNEMGE 4000A 21800mAh Portable Jump Starter

Indledning

This manual provides detailed instructions for the safe and effective use of your FNNEMGE 4000A 21800mAh Portable Jump Starter. This device is designed to jump-start 12V vehicles (up to 8.0L gasoline or 6.5L diesel engines) and also functions as a portable power bank and LED flashlight. Please read this manual thoroughly before operation and retain it for future reference.

Vigtige sikkerhedsoplysninger

Your FNNEMGE Jump Starter is equipped with 10 intelligent safety mechanisms to ensure safe operation. These protections include:

• Gnistfri beskyttelse
• Zero Damage Protection
• Lav voltage Beskyttelse
• Beskyttelse mod høj temperatur
• Kortslutningsbeskyttelse
• Omvendt polaritetsbeskyttelse
• Over Voltage Beskyttelse
• Overopladningsbeskyttelse
• Omvendt opladningsbeskyttelse
• Overstrømsbeskyttelse

Always follow these general safety guidelines:

• Nedsænk ikke enheden i vand.
• Brug ikke enheden, hvis den er beskadiget.
• Opbevares utilgængeligt for børn.
• Sørg for tilstrækkelig ventilation under brug og opladning.
• Forsøg ikke at starte køretøjer med starthjælp med vol.tagandre end 12V.

Image: The FNNEMGE Jump Starter highlighting its 10 advanced safety protections, including spark-proof, zero damage, low voltage, high temperature, short circuit, reverse polarity, over voltage, over charge, reverse charge, and overcurrent protection.

Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

• 1 x FNNEMGE Portable Jump Starter
• 1 x Smart Jumper Cable Set
• 1 x USB-C opladningskabel
• 1 x brugermanual

Image: The FNNEMGE Portable Jump Starter, its smart jumper cables, and the USB-C charging cable, representing the complete package contents.

Produkt overview

Komponenter

The FNNEMGE Jump Starter features a compact design with essential components for vehicle starting and portable power.

• Hovedenhed: Houses the battery, control circuitry, and display.
• Smarte jumperkabler: Equipped with safety features and indicators.
• USB-C indgangs-/udgangsport: For charging the unit and other devices.
• USB udgangsport: For charging other devices.
• LED lommelygte: Integreret lys med flere tilstande.

Intelligent LCD-skærm

The 2.6-inch LCD screen provides comprehensive information about the device's status, including battery level, input/output indications, and temperature alerts.

Image: The FNNEMGE Jump Starter's 2.6-inch intelligent LCD display, clearly showing battery percentage, IN/OUT indicators, and temperature warnings for easy monitoring of operational status.

Setup: Charging the Jump Starter

Before initial use, fully charge the jump starter. It is recommended to recharge the unit after each use to maintain optimal performance.

1. Connect the provided USB-C charging cable to the USB-C input port on the jump starter.
2. Connect the other end of the USB-C cable to a compatible USB wall adapter (not included) or a car charger.
3. LCD-displayet viser opladningsstatus og batteriprocenttage. Charge until the display indicates 100%.

The unit can also be charged via its USB-C port from a power source.

Betjeningsvejledning

1. Start af et køretøj med startkabler

This jump starter is designed for 12V vehicles with up to 8.0L gasoline or 6.5L diesel engines.

1. Trin 1: Ensure the jump starter has sufficient charge (at least 50% recommended). Insert the blue end of the smart jumper cable into the jump starter's 12V output port. Ensure a secure connection.
2. Trin 2: Tilslut den røde clamp (+) to the positive terminal of your vehicle's battery and the black clamp (-) to the negative terminal. The smart cable's indicator light will show the connection status.
3. Trin 3: Once the smart cable indicates a safe connection (usually a solid green light), return to your vehicle and start the engine.
4. Trin 4: After the engine starts, immediately remove the jumper cables from the vehicle battery terminals, then disconnect the smart cable from the jump starter.

Image: A visual guide demonstrating the four steps to jump-start a car: 1. Insert the jump cable into the jump starter. 2. Connect the clamps to your car battery. 3. Start your car engine. 4. Remove the clamps to complete the operation.

Note: If the vehicle does not start on the first attempt, wait at least 30 seconds before trying again. If the smart cable shows an error, refer to the troubleshooting section.

Image: The FNNEMGE Jump Starter in an engine bay, connected to a car battery, illustrating its capacity to deliver 4000A peak current, suitable for 8.0L gas and 6.5L diesel engines, providing 12 Volts for up to 60 starts.

2. Brug som powerbank

Jumpstarteren kan oplade forskellige elektroniske enheder via dens USB-udgange.

• Connect your device's USB charging cable to one of the jump starter's USB output ports (USB1 or USB-C).
• The LCD display will indicate "OUT" when charging is active.
• The 21800mAh capacity allows for multiple charges of smartphones, tablets, and other USB-powered devices.

Image: The FNNEMGE Jump Starter functioning as a 21800mAh power bank, connected via USB to charge a smartphone and wireless earbuds, demonstrating its versatility for various digital devices.

3. Brug af LED-lommelygten

The integrated LED flashlight offers three modes for different situations:

• Normalt lys: Press the flashlight button once for continuous illumination.
• SOS-tilstand: Press the button a second time for an SOS signal (three short, three long, three short flashes).
• Strobetilstand: Press the button a third time for a rapid strobe light.
• Tryk på knappen en fjerde gang for at slukke lommelygten.

Image: A mechanic utilizing the FNNEMGE Jump Starter's LED flashlight to illuminate an engine bay, with icons indicating its three modes: normal light, SOS signal, and strobe light, useful for dark conditions or emergencies.

Opretholdelse

Opbevaring

• Opbevar jumpstarteren på et køligt, tørt sted væk fra direkte sollys.
• For long-term storage, ensure the unit is charged to at least 50% and recharge every 3-6 months to prevent battery degradation.
• Holdes væk fra brandfarlige materialer og ekstreme temperaturer.

Rensning

• Tør enheden af ​​med en blød, tør klud.
• Brug ikke hårde kemikalier eller slibende rengøringsmidler.

Fejlfinding

Specifikationer

Garanti og support

FNNEMGE offers a 2 års garanti for this product, along with lifetime technical support and 24/7 customer service.

If you encounter any questions or issues during use, please contact us via the email address provided in the user manual included with your product package.