1. Introduktion
This manual provides comprehensive instructions for the installation, operation, and maintenance of your ErGear Single Monitor Mount, Model EGSS7. This monitor arm is designed to enhance your workspace ergonomics by providing adjustable positioning for a single monitor. Please read this manual thoroughly before installation and retain it for future reference.
Image 1.1: The ErGear Single Monitor Arm (Model EGSS7) in a typical office setup.
2. Sikkerhedsoplysninger
Please observe the following safety precautions to prevent injury or damage to your equipment:
- Overskrid ikke den maksimale vægtkapacitet på 6.5 kg.
- Ensure your monitor is between 17 and 27 inches in size.
- Verify that your monitor is VESA compatible (75x75mm or 100x100mm).
- Install the mount on a sturdy desk surface that can support the combined weight of the mount and your monitor.
- Follow all installation steps carefully. Improper installation may result in equipment damage or personal injury.
- Hold små dele væk fra børn.
3. Pakkens indhold
Before proceeding with installation, please ensure all components are present and undamaged. Refer to the included parts list for detailed identification.
Billede 3.1: Overview of the ErGear Single Monitor Mount components.
4. Specifikationer
| Feature | Specifikation |
|---|---|
| Mærke | Ergear |
| Model | EGSS7 |
| Kompatibel skærmstørrelse | 17-27 tommer |
| Vægt kapacitet | Op til 14.3 lbs (6.5 kg) |
| VESA-kompatibilitet | 75x75mm, 100x100mm |
| Monteringstype | C-clamp or Grommet |
| Materiale | Legeret stål |
| Farve | Sort |
| Tilt rækkevidde | -35° til +50° |
| Drejningsområde | -90° til +90° |
| Rotation | 360° |
| Produktdimensioner | 41.2 x 30.4 x 10 cm |
Image 4.1: Monitor size and weight capacity details.
5. Opsætningsvejledning
The ErGear Single Monitor Mount offers two installation options: C-clamp or Grommet mounting. Choose the option best suited for your desk.
Image 5.1: C-clamp and Grommet mounting options with desk thickness ranges.
5.1C-Clamp Installation
- Fastgør C-clamp to the base of the monitor arm.
- Placer C-clamp on the edge of your desk. Ensure the desk thickness is between 0.4 and 3.3 inches.
- Spænd clamp securely using the provided knob until the mount is stable.
5.2 Montering af gummiring
- If your desk has a grommet hole, insert the grommet bolt through the base of the monitor arm and the desk hole. Ensure the desk thickness is between 0.4 and 3.1 inches.
- Secure the mount from underneath the desk using the provided plate and nut.
5.3 Montering af skærmen
- Carefully attach your VESA-compatible monitor to the VESA plate on the arm using the appropriate screws.
- Ensure the screws are tightened firmly but do not overtighten.
5.4 Justering af spænding
The gas spring arm requires tension adjustment to properly support your monitor's weight. Use the included Allen key to adjust the tension screw located on the arm. Turn clockwise to increase tension for heavier monitors, and counter-clockwise to decrease tension for lighter monitors. Adjust until the monitor stays in position when moved.
Billede 5.2: Intern view of the flexible gas spring arm.
6. Betjeningsvejledning
Once installed, your ErGear monitor mount allows for flexible positioning of your monitor.
6.1 Justering af skærmposition
- Højdejustering: Gently push or pull the monitor to the desired height. The gas spring mechanism will hold it in place.
- Vip: Skærmen kan vippes fra -35° til +50° for at reducere genskin og optimere viewing vinkler.
- Drejelig: Swivel the monitor from -90° to +90° for collaborative work or to view content from different angles.
- Rotation: Drej skærmen 360° for at skifte mellem liggende og stående retning.
Image 6.1: Monitor height adjustment.
Image 6.2: Full motion range capabilities of the monitor arm.
6.2 Kabelstyring
The monitor arm features an integrated cable management system to keep your workspace tidy. Route your monitor cables through the designated channels on the arm to conceal them.
Image 6.3: Integrated cable management system.
7. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer din skærmbeslags levetid og optimale ydeevne.
- Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de er stramme.
- Clean the surface of the mount with a soft, damp klæde. Undgå slibende rengøringsmidler.
- Re-adjust the gas spring tension if your monitor feels too loose or too stiff when moving.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Skærmen hænger ned eller holder sig ikke på plads. | Gas spring tension is too low. | Increase gas spring tension using the Allen key (clockwise). |
| Skærmen er svær at flytte. | Gas spring tension is too high. | Decrease gas spring tension using the Allen key (counter-clockwise). |
| Bjerget føles ustabilt. | C-clamp or grommet connection is loose. | Spænd C-clamp knob or grommet nut. |
| Monitor does not fit the VESA plate. | Incorrect VESA pattern. | Ensure your monitor has a 75x75mm or 100x100mm VESA pattern. |
9. Garanti og support
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official ErGear website. Please have your model number (EGSS7) and purchase date available when contacting support.
