1. Introduktion
This user manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of the Broadcom MegaRAID 9560-16i Storage Controller. This high-performance RAID controller is designed to manage various storage devices, offering robust data protection and efficient data access for server environments.
2. Produktet er slutview
The Broadcom MegaRAID 9560-16i is a 16-channel storage controller supporting SATA 6Gb/s, SAS 12Gb/s, and PCIe 4.0 (NVMe) interfaces. It supports multiple RAID levels including 0, 1, 5, 6, 10, 50, 60, and JBOD, providing flexible storage solutions. The controller features a PCIe 4.0 x8 interface for high bandwidth connectivity.
2.1 Nøglefunktioner
- Connect up to 240 SAS/SATA devices or 24 NVMe devices per controller.
- Lav-profile form factor suitable for rack-mounted servers.
- Side-mounted SAS connectors for convenient cable management.
- PCIe 4.0 x8 host interface for high-speed data transfer.
- Support for RAID levels 0, 1, 5, 6, 10, 50, 60, and JBOD.
2.2 Produktbillede
Figure 2.1: Broadcom MegaRAID 9560-16i storage controller. This image displays the green circuit board with a large black heatsink covering the main processor, and multiple SAS/SATA ports on the right side. The card also features a PCIe connector at the bottom and a metal bracket for mounting.
3. Opsætning og installation
3.1 Systemkrav
- Available PCIe 4.0 x8 slot or higher.
- Compatible server or personal computer system.
- Operating system with appropriate driver support.
- Sufficient power supply.
3.2 Hardwareinstallation
- Sluk-system: Ensure the computer system is completely powered off and disconnected from the power source.
- Åbent chassis: Open the computer chassis to access the motherboard and expansion slots.
- Find PCIe-slot: Identify an available PCIe 4.0 x8 slot.
- Insert Controller: Carefully align the Broadcom MegaRAID 9560-16i controller with the PCIe slot and firmly press it down until it is securely seated.
- Sikkert kort: Secure the controller card with the retention mechanism or screw provided by your chassis.
- Tilslut kabler: Connect your SAS/SATA/NVMe drives to the appropriate ports on the controller using compatible cables.
- Luk chassis: Close the computer chassis and reconnect the power.
3.3 Driverinstallation
After hardware installation, power on the system. You may need to install the appropriate drivers for the Broadcom MegaRAID 9560-16i controller. Drivers are typically available on the Broadcom official support website. Follow the driver installation instructions provided by Broadcom for your specific operating system.
4. Betjeningsvejledning
4.1 Indledende konfiguration
Upon successful driver installation, the controller will be recognized by your operating system. Initial configuration, such as creating RAID arrays, is typically performed through the controller's BIOS utility during system boot-up or via a software utility provided by Broadcom (e.g., MegaRAID Storage Manager).
4.2 Creating RAID Arrays
- Access the RAID controller's configuration utility during system startup (usually by pressing a specific key like Ctrl+R or Ctrl+H when prompted).
- Select the drives you wish to include in the array.
- Choose the desired RAID level (e.g., RAID 0, 1, 5, 6, 10, 50, 60, or JBOD) based on your performance and redundancy requirements.
- Configure array parameters such as stripe size and cache policy.
- Save the configuration and exit the utility. The system will then recognize the new logical drive.
4.3 Monitoring and Management
Use the Broadcom MegaRAID Storage Manager (MSM) or a similar utility to monitor the health of your RAID arrays and connected drives. This software allows you to view array status, perform maintenance tasks, and receive alerts for potential issues.
5. Vedligeholdelse
- Driver opdateringer: Tjek regelmæssigt Broadcom-supporten website for updated drivers and firmware for your MegaRAID controller. Keeping drivers and firmware current can improve performance and stability.
- Systemkøling: Ensure adequate airflow within your server chassis to prevent overheating of the controller and other components.
- Data backup: While RAID provides data redundancy, it is not a substitute for regular data backups. Always maintain a robust backup strategy for critical data.
- Fysisk inspektion: Periodically inspect the controller and its connections for any signs of damage or loose cables.
6. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Controlleren blev ikke registreret af systemet. | Incorrectly seated in PCIe slot; incompatible slot; power issue; missing drivers. | Ensure controller is fully seated. Try a different PCIe slot. Verify power connections. Install or update drivers. |
| Drives not recognized by controller. | Loose or faulty cables; incompatible drives; drive failure. | Check all data and power cables. Ensure drives are compatible. Test drives individually if possible. |
| RAID-arrayet er forringet eller fejler. | Drive failure; improper configuration. | Identify and replace the failed drive. Rebuild the array using the RAID management utility. Review konfigurationsindstillinger. |
| Problemer med systemets ydeevne. | Outdated drivers/firmware; high I/O load; insufficient system resources. | Update drivers and firmware. Optimize RAID array settings. Ensure adequate system RAM and CPU. |
For more detailed troubleshooting, refer to the official Broadcom support documentation or contact Broadcom technical support.
7. Specifikationer
| Modelnummer | 05-50077-00 |
| Mærke | BROADCOM |
| Produktdimensioner | 22 x 8 x 3 cm; 252 g |
| Hardware-interface | SAS, SATA, PCIe 4.0 (NVMe) |
| Kanaler | 16 |
| RAID-niveauer understøttet | 0, 1, 5, 6, 10, 50, 60, JBOD |
| Host-interface | PCIe 4.0 x8 |
| Kompatible enheder | Personal Computer (Servers) |
| UPC | 830343007462 |
| ASIN | B08B52PR5Q |
| Dato først tilgængelig | 18. april 2020 |
8. Garanti og support
The Broadcom MegaRAID 9560-16i Storage Controller is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Broadcom webwebsted.
For technical support, driver downloads, firmware updates, and additional resources, please visit the Broadcom support portal. It is recommended to have your product model number (05-50077-00) and serial number ready when contacting support.
