1. Introduktion
The TRENDnet TC-NTP1 Inline PoE Tester is a compact tool designed for network professionals. It provides accurate testing for various Power over Ethernet (PoE) technologies, including 4PPoE, PoE+, PoE, and passive PoE. This device operates inline between a PoE source (PSE) and a PoE device (PD), offering real-time data on wattage, bindtage, og amperage. It is compatible with IEEE 802.3af/at/bt PoE devices up to 100W and non-standard passive PoE devices ranging from 11V to 60V.
2. Nøglefunktioner
- PoE Technology Support: Tests 4PPoE, PoE+, PoE, and passive PoE.
- Overvågning i realtid: Viser hvadtage, bindtage, og amperage of the connected PoE device.
- Multiple Testing Modes: Includes T-mode for PSE device testing, N-mode for non-standard passive PoE, and I-mode for inline PoE testing.
- Brugervenlig betjening: Battery-free design for immediate use.
- Kompatibilitet: Supports IEEE 802.3af/at/bt PoE devices up to 100W and passive PoE from 11V – 60V.
- Step Button Functionality: Allows cycling through and locking display readouts for voltage, amperage, og wattage.
- Gigabit-porte: Equipped with one Gigabit port for PSE connection and one Gigabit port for PoE device connection.
- NDAA Compliant: Suitable for government networking solutions (U.S. and Canada Only).
3. Pakkens indhold
- TRENDnet TC-NTP1 Inline PoE Tester
- Hurtig installationsvejledning
4. Produktet er slutview
Figur 4.1: Vinklet view of the TRENDnet TC-NTP1 Inline PoE Tester, showing the display and ports.
Figur 4.2: Øverst view of the TC-NTP1, highlighting the LED display for Mode A (End-span) and Mode B (Mid-span) and the 'STEP' button.
Figur 4.3: Forside view of the TC-NTP1, showing the PSE (Power Sourcing Equipment) Gigabit Ethernet port.
Figur 4.4: Nederst view of the TC-NTP1, showing the product information label.
5. Opsætning
- Ensure the TC-NTP1 is free from any physical damage.
- The device is battery-free and ready for use upon connection. No external power source is required for its operation.
- Identify the Power Sourcing Equipment (PSE) and the Powered Device (PD) in your network setup.
6. Betjeningsvejledning
6.1. Connecting the Tester
- Connect the Ethernet cable from your PoE source (e.g., PoE switch or injector) to the PSE port on the TC-NTP1.
- Tilslut et Ethernet-kabel fra PD port on the TC-NTP1 to your PoE device (e.g., IP camera, access point).
- The TC-NTP1 will automatically power on and begin displaying information.
6.2. Testing Modes
The TC-NTP1 offers three distinct testing functions:
- T-mode (PSE Device Testing): This mode is used to determine the PoE type and voltage output of your Power Sourcing Equipment (PSE), such as a PoE switch or injector. Connect the PSE directly to the tester's PSE port.
- N-mode (Non-Standard Passive PoE Devices): Designed for testing non-standard passive PoE devices. This mode supports devices with voltage spænder fra 11V til 60V.
- I-mode (PoE Inline Testing): For real-time monitoring, connect the tester inline between the PSE and the Powered Device (PD). This mode displays the voltage, amperage, og wattage being delivered to the connected PD.
6.3. Using the Step Button
De TRIN button on the TC-NTP1 allows you to cycle through the displayed readouts (voltage, amperage, og wattage). Pressing the button repeatedly will switch between these values. You can also press and hold the button to lock the display on a specific readout for continuous monitoring.
7. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | TC-NTP1 |
| Mærke | TRENDnet |
| PoE-standarder | IEEE 802.3af, 802.3at, 802.3bt |
| Supported PoE Types | 4PPoE, PoE+, PoE, Passive PoE |
| Max effekt | Op til 100W |
| Passiv PoE VoltagRækkevidde | 11V – 60V |
| Havne | 1 x Gigabit PSE, 1 x Gigabit PD |
| Vise | LED (Wattage, bindtage, Amperage, Polarity) |
| Strømkilde | Battery-Free (Powered by PoE) |
| Dimensioner (L x B x H) | 3.9 x 1.4 x 1 tommer (99 x 36 x 25 mm) |
| Vægt | 2.82 ounce (0.08 kg) |
| Driftstemperatur | 32°F til 122°F (0°C til 50°C) |
| Certificeringer | CE, FCC |
8. Fejlfinding
- Ingen skærm/strøm: Ensure the PoE source is active and providing power. The TC-NTP1 is battery-free and draws power from the PoE connection. Verify the Ethernet cables are properly connected and functional.
- Forkerte aflæsninger: Double-check that the cables are securely connected to the correct PSE and PD ports. Ensure the PoE source and device are compatible with the tester's supported standards.
- Device Not Powering On (PD): If the PoE device connected to the PD port is not powering on, use T-mode to test the PSE directly to confirm it is supplying power correctly. Then, use I-mode to check the inline power delivery.
- Polarity Issues: The tester indicates polarity. If a "REV" (Reverse Polarity) LED illuminates, there may be an issue with the PoE source or cabling.
9. Vedligeholdelse
- Rensning: Brug en blød, tør klud til at rengøre enheden. Brug ikke flydende rengøringsmidler eller rengøringsmidler på aerosol.
- Opbevaring: Opbevar enheden et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
- Håndtering: Handle the device with care to prevent physical damage to the ports or internal components.
10. Garanti og support
The TRENDnet TC-NTP1 Inline PoE Tester is backed by a 2 års TRENDnet-producentbeskyttelse from the date of purchase. For technical assistance or warranty claims, please contact TRENDnet's customer support.
TRENDnet provides reliable technical support with English-speaking advisors and experts available during normal business hours. For support, visit the official TRENDnet website or refer to the contact information provided in the Quick Installation Guide.
For mere information, besøg TRENDnet-butik på Amazon.
